Brook Milligan <brook@biology.nmsu.edu>  wrote:
 > Is there any reason to be concerned about NetBSD not running well on a
 > ASUS K7M motherboard with a AMD Athlon CPU?  Anyone have experience
 > with that combination?


NetBSD 1.4Y (STOUT) #0: Wed May 31 03:37:32 MDT 2000
    hpeyerl@stout.beer.org:/data1/current-000513/syssrc/sys/arch/i386/compile/STOUT
cpu0: family 6 model 2 step 1
cpu0: AMD K7 (Athlon) (686-class)
total memory = 65084 KB
avail memory = 55680 KB
using 839 buffers containing 3356 KB of memory
BIOS32 rev. 0 found at 0xfd9c0
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: Advanced Micro Devices AMD751 System Controller (rev. 0x25)
ppb0 at pci0 dev 1 function 0: Advanced Micro Devices AMD751 PCI-to-PCI Bridge (rev. 0x01)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 5 function 0: ATI Technologies Mach64 GD (rev. 0x5c)
wsdisplay0 at vga1: console (80x25, vt100 emulation)
pcib0 at pci0 dev 4 function 0
pcib0: VIA Technologies VT82C686A (Apollo KX133) PCI-ISA Bridge (rev. 0x1b)
pciide0 at pci0 dev 4 function 1: VIA Technologies VT82C586A IDE Controller (rev. 0x06)
pciide0: bus-master DMA support present
pciide0: primary channel configured to compatibility mode
pciide0: disabling primary channel (no drives)
pciide0: secondary channel configured to compatibility mode
pciide0: disabling secondary channel (no drives)
uhci0 at pci0 dev 4 function 2: VIA Technologies VT83C572 USB Controller (rev. 0x0e)
uhci0: interrupting at irq 12
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA Technologie UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 4 function 3: VIA Technologies VT83C572 USB Controller (rev. 0x0e)
uhci1: interrupting at irq 12
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA Technologie UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
VIA Technologies VT82C686A SMBus Controller (SMBus serial bus, revision 0x20) at pci0 dev 4 function 4 not configured
de0 at pci0 dev 13 function 0
de0: interrupting at irq 11
de0: 21143 [10-100Mb/s] pass 3.0
de0: address 00:00:c5:50:68:d8
ahc1 at pci0 dev 14 function 0
ahc1: interrupting at irq 10
ahc1: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs
scsibus0 at ahc1 channel 0: 16 targets, 8 luns per target
ncr0 at pci0 dev 15 function 0: ncr 53c810a fast10 scsi
ncr0: interrupting at irq 9
ncr0: minsync=25, maxsync=206, maxoffs=8, 16 dwords burst, normal dma fifo
ncr0: single-ended, open drain IRQ driver
ncr0: restart (scsi reset).
scsibus1 at ncr0: 8 targets, 8 luns per target
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
lpt0 at isa0 port 0x378-0x37b irq 7
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: no ISA Plug 'n Play devices found
biomask f765 netmask ff65 ttymask ffe7
scsibus0: waiting 2 seconds for devices to settle...
ahc1: target 0 using 16bit transfers
ahc1: target 0 synchronous at 10.0MHz, offset = 0x8
ahc1: target 0 using tagged queuing
sd0 at scsibus0 target 0 lun 0: <SEAGATE, ST34572W, 0784> SCSI2 0/direct fixed
sd0: 4340 MB, 6300 cyl, 8 head, 176 sec, 512 bytes/sect x 8888924 sectors
de0: enabling 10baseT port
ahc1: target 4 using 16bit transfers
ahc1: target 4 synchronous at 10.0MHz, offset = 0x8
ahc1: target 4 using tagged queuing
sd4 at scsibus0 target 4 lun 0: <IBM, DDRS-34560D, DC1B> SCSI2 0/direct fixed
sd4: 4357 MB, 8387 cyl, 5 head, 212 sec, 512 bytes/sect x 8925000 sectors
scsibus1: waiting 2 seconds for devices to settle...
sd16 at scsibus1 target 0 lun 0: <FUJITSU, M2949S-512, 0164> SCSI2 0/direct fixed
sd16(ncr0:0:0): 10.0 MB/s (100 ns, offset 8)
sd16: 8682 MB, 5771 cyl, 18 head, 171 sec, 512 bytes/sect x 17781964 sectors
sd17 at scsibus1 target 6 lun 0: <SEAGATE, ST39216N, 0004> SCSI3 0/direct fixed
sd17(ncr0:6:0): 10.0 MB/s (100 ns, offset 8)
sd17: 8761 MB, 14384 cyl, 3 head, 415 sec, 512 bytes/sect x 17942584 sectors
boot device: sd0
root on sd0a dumps on sd0b
root file system type: ffs
IP Filter: v3.4.2 initialized.  Default = pass all, Logging = enabled