I'm having some problems with the PCMCIA controller on my laptop, and was
wondering if anybody knew how to solve the problem. Dmesg output is
below. Thanks.

Jared

NetBSD 1.4.2 (GENERIC) #3: Wed Mar 15 23:41:54 PST 2000
    toddpw@vader.toddpw.net:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel 486DX (486-class)
real mem  = 8192000
avail mem = 3981312
using 125 buffers containing 512000 bytes of memory
mainbus0 (root)
isa0 at mainbus0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns8250 or ns16450, no fifo
wdc0 at isa0 port 0x1f0-0x1f7 irq 14
wd0 at wdc0 channel 0 drive 0: <Maxtor 25128 AT>
wd0: drive supports 16-sector pio transfers, chs addressing
wd0: 122MB, 981 cyl, 15 head, 17 sec, 512 bytes/sect x 250155 sectors
vga0 at isa0 port 0x3b0-0x3df iomem 0xa0000-0xbffff
wsdisplay0 at vga0: console (80x25, vt100 emulation)
lpt0 at isa0 port 0x378-0x37b irq 7
pas: detected card but PAS2 test failed
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
opms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
pcic: does not support memory and I/O cards, ignored (ident=c0)
pcic0 at isa0 port 0x3e0-0x3e1 iomem 0xd0000-0xd3fff: using irq 3
pcic0: controller 0 (Intel 82365SL Revision 1) has sockets A and B
pcic0: controller 1 (Intel 82365SL Revision 1) has socket A only
pcmcia0 at pcic0 controller 0 socket 0
pcmcia1 at pcic0 controller 0 socket 1
pcmcia2 at pcic0 controller 1 socket 0
pcic_chip_socket_enable: status 81pcic: does not support memory and I/O cards, ignored (ident=40)
pcic: does not support memory and I/O cards, ignored (ident=c0)
pcic1 at isa0 port 0x3e2-0x3e3 iomem 0xd4000-0xd7fff: using irq 5
pcic: does not support memory and I/O cards, ignored (ident=c0)
pcic1: controller 0 (Intel 82365SL Revision 1) has socket A only
pcic1: controller 1 (Intel 82365SL Revision 1) has socket A only
pcmcia3 at pcic1 controller 0 socket 0
pcic_chip_socket_enable: status 81pcmcia4 at pcic1 controller 1 socket 0
pcic_chip_socket_enable: status 81isapnp0: no ISA Plug 'n Play devices found
biomask 4040 netmask 4040 ttymask 50ea
wscons: wskbd0 glued to wsdisplay0 (console)
boot device: wd0
root on wd0a dumps on wd0b
clock: unknown CMOS layout
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
wsdisplay0: screen 5 added (80x25, vt100 emulation)
wsdisplay0: screen 6 added (80x25, vt100 emulation)
wsdisplay0: screen 7 added (80x25, vt100 emulation)