On Tue, 28 Mar 2000, Jared D. McNeill wrote:

> Date: Tue, 28 Mar 2000 19:20:04 -0400 (AST)
> From: Jared D. McNeill <jmcneill@invisible.yi.org>
> To: George Sollish <gsollish@mail.gisco.net>
> Cc: port-i386@netbsd.org
> Subject: Re: AOpen AW37 Soundcard
> 
> > I'm trying to install an AOpen AW37 PnP soundcard in an i586.  PnP is
> > disabled in the BIOS and the card is identified on boot, but not
> > configured.  The relevant dmesg lines appear to be:
> 
> I have the exact same card, and from the output of your dmesg it should be
> working. Here's what mine looks like:
> 
> isapnp0: read port 0x203
> wss0 at isapnp0 port 0x534/4,0x388/4,0x220/16 irq 5 drq 1,0
> wss0: Crystal Codec WSS/SB: CS4236B compatible
> audio0 at wss0: full duplex, mmap
> opl0 at wss0: model OPL3
> midi1 at opl0: WSS Yamaha OPL3
> joy0 at isapnp0 port 0x200/8
> joy0: Crystal Codec GAME
> joy0: joystick not connected
> isapnp0: <Crystal Codec, CSC0010, , CTRL> port 0x120/8 not configured
> isapnp0: <Crystal Codec, CSC0003, , MPU> port 0x330/2 irq 9 not configured
> 
> The device at port 0x120 is the 'Control Interface' and isn't really
> needed to function properly. 0x330 is the MPU401 port, and I don't use
> that. audio0 works great here -- I haven't had a chance to play with opl0
> yet.
> 
> Jared

Thanks for the response.  But where you're getting wss0 and audio0
recognized I'm getting wss1: ad1848_probe failed and no audio*.  I read in
the tech-kern archives that the ad1848 probe was faulty for the cs423x
card, but that was in '98, and yours works, so that problem must be
overcome on your box. Are you running pnp and what version of NetBSD?  I'm
running this on 1.4.2. 

George E Sollish	Chief Engineer  	 Auto Gear Equipment
			Host	 		 Classic-FM's Listening Room
			Project Manager		 The Payne Lake Project