On Thu, 13 Jan 2000, Martijn Bakker wrote:

> This might be utter nonsense, but in a similar situation I got errors 
> when I was configuring the interfaces. Cause was a media selection I
> copied from the old ifconfig.??? which was invalid for the rtl8139 card,
> causing the ifconfig to fail. Might your error result from a similar
> case (and hence, for ipf, an unknown/unconfigured interface name)?
> 

my ipnat.conf looks like this...

map rl0 192.168.100.100/8 -> w.x.y.z/26 proxy port ftp ftp/tcp
map rl0 192.168.100.100/8 -> w.x.y.z/26 portmap tcp/udp 40000:60000
map rl0 192.168.100.100/8 -> w.x.y.z/26

where w.x.y.z is the IP on rl0 and 192.168.100.100 for rl1
and my ipf.conf looks like this...

pass in from any to any
pass out from any to any

...
We have netmask 255.255.255.192 on our subnet.
As I said I am trying to do a gateway. But in this early stages I'm doing
a simple LAN setup. And again... This works for me with the
ep0 device with w.x.y.z/32 at my local LAN at home.


Roine Thunberg

============== Astrakan Computer Club =================