[Please keep me on the CC: list - Thanks!]


Hi,

I had the chance to upgrade my old Toshiba Tecra 510 CDS to a Tecra 8000
today. I installed 1.4.1/i386, but when I tried to use my ethernet
card and/or my modem card, this didn't work any more. The network card was
recognized as ne2 (by the GENERIC kernel), but talking to it didn't work:
ne2: device timeout after ifconfig went fine, and when pinging around.

When booting up the kernel with the modem card plugged in, it got
recognized as comX (forgot the number), and then the system locked solid. 

I've tried a -current kernel, and that helped at least for the network
card, the modem card still doesn't work. The dmesg output of the kernel
without the modem card is attached below. 

The ethernet card is a Link Pro PCMCIA Ethernet Adapter, recognized as
ne0 on the Tecra 510, the modem card is a Global PC Card Modem (GSM
Ready). 

Does anyone have similar experiences and know a cure?

I've already played with setting pcic_isa_alloc_iobase to several values
between 0x200 and 0x440, but that didn't help. 


 - Hubert

-- 
NetBSD - Better for your uptime than Viagra


NetBSD 1.4M (NOON) #1: Tue Nov  9 06:17:34 MET 1999
    feyrer@yui:/disk1/cvs/src-current/sys/arch/i386/compile/NOON
cpu0: family 6 model 6 step a
cpu0: Intel Pentium II (Celeron) (686-class)
total memory = 65088 KB
avail memory = 57408 KB
using 839 buffers containing 3356 KB of memory
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82443BX Host Bridge/Controller (AGP disabled) (rev. 0x03)
vga1 at pci0 dev 4 function 0: Neomagic MagicMedia 256AV VGA (rev. 0x12)
wsdisplay0 at vga1: console (80x25, vt100 emulation)
pcib0 at pci0 dev 5 function 0
pcib0: Intel 82371AB PCI-to-ISA Bridge (PIIX4) (rev. 0x02)
pciide0 at pci0 dev 5 function 1: Intel 82371AB IDE controller (PIIX4)
pciide0: bus-master DMA support present
pciide0: primary channel wired to compatibility mode
wd0 at pciide0 channel 0 drive 0: <TOSHIBA MK4006MAV>
wd0: drive supports 16-sector pio transfers, lba addressing
wd0: 3909MB, 7944 cyl, 16 head, 63 sec, 512 bytes/sect x 8007552 sectors
wd0: 32-bits data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data transfers)
pciide0: secondary channel wired to compatibility mode
atapibus0 at pciide0 channel 1
cd0 at atapibus0 drive 0: <CD-224E, , 0.9A> type 5 cdrom removable
cd0: 32-bits data port
cd0: drive supports PIO mode 4, DMA mode 2
pciide0: secondary channel interrupting at irq 15
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
uhci0 at pci0 dev 5 function 2: Intel 82371AB USB Host Controller (PIIX4) (rev. 0x01)
uhci0: interrupting at irq 11
uhci0: USB version 1.0
usb0 at uhci0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
Intel 82371AB Power Management Controller (PIIX4) (miscellaneous bridge, revision 0x02) at pci0 dev 5 function 3 not configured
Toshiba America Info Systems Fast Infrared Type O (miscellaneous communications, revision 0x23) at pci0 dev 9 function 0 not configured
Toshiba America Info Systems ToPIC97 CardBus-PCI Bridge (CardBus bridge, revision 0x05) at pci0 dev 11 function 0 not configured
Toshiba America Info Systems ToPIC97 CardBus-PCI Bridge (CardBus bridge, revision 0x05) at pci0 dev 11 function 1 not configured
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
sb0 at isa0 port 0x220-0x237 irq 5 drq 1: dsp v3.01
audio0 at sb0: half duplex
midi0 at sb0: SB MIDI UART
opl0 at sb0: model OPL3
midi1 at opl0: SB Yamaha OPL3
wss0 at isa0 port 0x530-0x537 irq 10 drq 0 drq2 1: CS4231 or AD1845
audio1 at wss0: full duplex
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi2 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
pcic0 at isa0 port 0x3e0-0x3e1 iomem 0xd0000-0xd3fff: using irq 3
pcic0: controller 0 (Intel 82365SL Revision 1) has sockets A and B
pcmcia0 at pcic0 controller 0 socket 0
pcmcia1 at pcic0 controller 0 socket 1
ne0 at pcmcia1 function 0 port 0x340-0x34f port 0x350-0x35f
ne0: RPTI EP401 Ethernet
ne0: Ethernet address 00:40:95:40:43:85
isapnp0: no ISA Plug 'n Play devices found
biomask eb55 netmask eb55 ttymask fbdf
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
pcmcia1: card irq 4
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)