This is a multi-part message in MIME format.
--------------231A67C497FBC6BBE5773F5D
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Hello,

Garcia wrote:

> hello please reply I didnt understand question?
>

I will explain , i have updated netbsd to current, for cardbus support
on my Toshiba 8000, with a custom kernel-
1)no sound support turned 'on'- commented out all sound controller and
options
2)In bios sound disabled, serial devices-disabled frees up irq3,4&5
3) In bios pcic controller -enabled
I get what appears to be a correct recognition of ep0 (3com pcmcia 16
bit cards-589D/E), but i can not send or recieve packets
netstat -rn, ifconfig -a both indicate the interface is 'up'? Whats
wrong it acts if there is an irq conflict however irq4 i know is free.
my dmesg is attached-thanks in advance-mel



--------------231A67C497FBC6BBE5773F5D
Content-Type: text/plain; charset=us-ascii;
 name="dmesg.1"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="dmesg.1"

:
pcic0 at isa0 port 0x3e0-0x3e1 iomem 0xd0000-0xd3fff: using irq 3
pcic0: controller 0 (Intel 82365SL Revision 1) has sockets A and B
pcmcia0 at pcic0 controller 0 socket 0
ep0 at pcmcia0 function 0 port 0x330-0x33f: 3Com 3c589 10Mbps Ethernet
ep0: address 00:00:86:37:84:68, 8KB byte-wide FIFO, 5:3 Rx:Tx split
ep0: 10baseT, 10base5, 10base2 (default 10baseT)
pcmcia1 at pcic0 controller 0 socket 1
biomask c040 netmask c040 ttymask d0ca
wscons: wskbd0 glued to wsdisplay0 (console)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
pcmcia0: card irq 4

--------------231A67C497FBC6BBE5773F5D--