Hi,

i'm running the netbsd-1.4 branch from about a week ago, 
and am trying to use the modem part of the a 3C562D/3C563D
card.
the ethernet part works fine (since 1.4; i don't use
-current), however i've had no luck with the modem so far and
was wondering if anyone had more luck.

syslog spits the following anytime if i try to send anything
to /dev/tty02

	com2: com_iflush timeout ff

any help would be appreciated, upgrading to -current isn't an
option for me :/

Christophe
---
pcmcia1 at pcic0 controller 0 socket 1
pcmcia1: CIS version PCMCIA 2.0 or 2.1
pcmcia1: CIS info: 3Com Corporation, 3C562D/3C563D, EtherLink III, LAN+Modem PC 
Card
pcmcia1: Manufacturer code 0x101, product 0x562
pcmcia1: function 0: network adapter, ccr addr 1800 mask 3ff
pcmcia1: function 0, config table entry 7: I/O card; irq mask ffff; iomask 4, io
space 0-f; rdybsy_active wp_active bvd_active io8 io16 irqlevel
pcmcia1: function 1: serial port, ccr addr 1900 mask 3ff
pcmcia1: function 1, config table entry 7: I/O card; irq mask 86b8; iomask 3, io
space 2f8-2ff; io8 audio
pcmcia1: function 1, config table entry 23: I/O card; irq mask 86b8; iomask 3, i
ospace 2e8-2ef; io8 audio
pcmcia1: function 1, config table entry 39: I/O card; irq mask 86b8; iomask 3, i
ospace 0-7; io8 audio
ep0 at pcmcia1 function 0 port 0x400-0x40f: 3Com 3c562 33.6 Modem/10Mbps Etherne
t
ep0: address 00:60:97:85:79:aa, 8KB byte-wide FIFO, 5:3 Rx:Tx split
ep0: 10baseT, 10base5, 10base2 (default 10baseT)
com2 at pcmcia1 function 1 port 0x410-0x417: serial device
com2: ns16550a, working fifo