On Mon, Oct 18, 1999 at 01:44:11PM +0300, Jukka Marin wrote:
> Short description: Argh!
> 
> Long one:
> 
> NetBSD 1.4.1 (KYYHKY) #0: Sat Oct 16 02:18:50 EEST 1999
>     root@kyyhky:/store/s/NetBSD141/usr/src/sys/arch/i386/compile/KYYHKY
> 
> ncr0 at pci0 dev 8 function 0: ncr 53c810a fast10 scsi
> ncr0: interrupting at irq 11
> ncr0: minsync=25, maxsync=206, maxoffs=8, 16 dwords burst, normal dma fifo
> ncr0: single-ended, open drain IRQ driver
> ncr0: restart (scsi reset).
> 
> st1 at scsibus0 targ 4 lun 0: <HP, C1533A, A812> SCSI2 1/sequential removable
> st1: st1(ncr0:4:0): 10.0 MB/s (100 ns, offset 8)
> density code 0x24, variable blocks, write-enabled
> 
> Oct 18 13:40:32 kyyhky /netbsd: st1(ncr0:4:0):  Check Condition on CDB: 0x0a
> 00 00 28 00 00
> Oct 18 13:40:32 kyyhky /netbsd:     SENSE KEY:  Aborted Command
> Oct 18 13:40:32 kyyhky /netbsd:      ASC/ASCQ:  Data Phase Error
> Oct 18 13:40:32 kyyhky /netbsd: 
> Oct 18 13:40:32 kyyhky /netbsd: st1(ncr0:4:0):  Check Condition on CDB: 0x0a
> 00 00 28 00 00
> Oct 18 13:40:32 kyyhky /netbsd:     SENSE KEY:  Aborted Command
> Oct 18 13:40:32 kyyhky /netbsd:      ASC/ASCQ:  Data Phase Error
> Oct 18 13:40:32 kyyhky /netbsd: 
> 
> 
> It's doing this every time I try to write to the tape now (it worked
> last night when it backed up some data).
> 
> No, I don't want to get an Adaptec because I have NCR cards on several
> machines and when I was about to buy the first one, I was told to get
> an NCR because "it works well" ;-)

Is this the stock 1.4.1 sources, or sources from the -release branch ?
In the latter case could you try to revert ncr.c to the stock 1.4.1 version ?
Just trying to get some more infos ...

--
Manuel Bouyer, LIP6, Universite Paris VI.           Manuel.Bouyer@lip6.fr
--