Subject: ncr lossage under 1.4.1
To: Port-i386 <port-i386@NetBSD.ORG>
From: Jukka Marin <jmarin@pyy.jmp.fi>
List: port-i386
Date: 10/18/1999 13:44:11
Short description: Argh!

Long one:

NetBSD 1.4.1 (KYYHKY) #0: Sat Oct 16 02:18:50 EEST 1999
    root@kyyhky:/store/s/NetBSD141/usr/src/sys/arch/i386/compile/KYYHKY

ncr0 at pci0 dev 8 function 0: ncr 53c810a fast10 scsi
ncr0: interrupting at irq 11
ncr0: minsync=25, maxsync=206, maxoffs=8, 16 dwords burst, normal dma fifo
ncr0: single-ended, open drain IRQ driver
ncr0: restart (scsi reset).

st1 at scsibus0 targ 4 lun 0: <HP, C1533A, A812> SCSI2 1/sequential removable
st1: st1(ncr0:4:0): 10.0 MB/s (100 ns, offset 8)
density code 0x24, variable blocks, write-enabled

Oct 18 13:40:32 kyyhky /netbsd: st1(ncr0:4:0):  Check Condition on CDB: 0x0a
00 00 28 00 00
Oct 18 13:40:32 kyyhky /netbsd:     SENSE KEY:  Aborted Command
Oct 18 13:40:32 kyyhky /netbsd:      ASC/ASCQ:  Data Phase Error
Oct 18 13:40:32 kyyhky /netbsd: 
Oct 18 13:40:32 kyyhky /netbsd: st1(ncr0:4:0):  Check Condition on CDB: 0x0a
00 00 28 00 00
Oct 18 13:40:32 kyyhky /netbsd:     SENSE KEY:  Aborted Command
Oct 18 13:40:32 kyyhky /netbsd:      ASC/ASCQ:  Data Phase Error
Oct 18 13:40:32 kyyhky /netbsd: 


It's doing this every time I try to write to the tape now (it worked
last night when it backed up some data).

No, I don't want to get an Adaptec because I have NCR cards on several
machines and when I was about to buy the first one, I was told to get
an NCR because "it works well" ;-)

What can I do?

  -jm