Subject: Re: XF86: Neomagic vs. wsmouse, help?
To: Jonathan Stone <jonathan@DSG.Stanford.EDU>
From: Sean Doran <smd@ebone.net>
List: port-i386
Date: 10/15/1999 21:38:24
--=-=-=
Jonathan Stone <jonathan@DSG.Stanford.EDU> writes:
> The native 1.4.1 Xserver groks wsmouse but not Neomagic.
-current's XF86_SVGA Just Worked with a Neomagic chip
in my IBM ThinkPad 600.
The snapshot from www.xfree86.org Just Works as well,
although it does not do hardware acceleration at the
moment.
A config that Just Works for each version of X is
attached, as well as the 3.9 startup log.
Sean.
--=-=-=
Content-Disposition: attachment; filename=XF86Config
Content-Description: /etc/XF86Config for xsrc-based XF86_SVGA X server
# XF86Config for Model 600 w/ neomagic xserver
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled,/usr/X11R6/lib/X11/fonts/75dpi:unscaled,/usr/X11R6/lib/X11/fonts/100dpi:unscaled,/usr/X11R6/lib/X11/fonts/Type1,/usr/X11R6/lib/X11/fonts/Speedo,/usr/X11R6/lib/X11/fonts/misc,/usr/X11R6/lib/X11/fonts/75dpi,/usr/X11R6/lib/X11/fonts/100dpi"
EndSection
#Section "Module"
# Load "xf86Jstk.so"
#EndSection
Section "ServerFlags"
# NoTrapSignals
# DontZap
# DontZoom
# DisableVidModeExtension
# AllowNonLocalXvidtune
# DisableModInDev
# AllowNonLocalModInDev
EndSection
Section "Keyboard"
Protocol "Standard"
AutoRepeat 500 5
# LeftAlt Meta
# RightAlt Meta
# ScrollLock Compose
# RightCtl Control
# XkbKeycodes "xfree86"
# XkbTypes "default"
# XkbCompat "default"
# XkbSymbols "us(pc101)"
# XkbGeometry "pc"
# XkbRules "xfree86"
# XkbModel "jp106"
# XkbLayout "jp"
# XkbKeymap "xfree86(de_CH)"
XkbDisable
EndSection
Section "Pointer"
Protocol "wsmouse"
Device "/dev/wsmouse"
Emulate3Timeout 50
EndSection
Section "Monitor"
Identifier "Generic Multisync"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 30-64
VertRefresh 50-100
# 640x480 @ 60 Hz, 31.5 kHz hsync
Modeline "640x480" 25.175 640 664 760 800 480 491 493 525
# 800x600 @ 60 Hz, 37.8 kHz hsync
Modeline "800x600" 40 800 840 968 1056 600 601 605 628 +hsync +vsync
# 1024x768 @ 60 Hz, 48.4 kHz hsync
Modeline "1024x768" 65 1024 1032 1176 1344 768 771 777 806 -hsync -vsync
EndSection
Section "Device"
Identifier "NeoMagic"
# Chipset "NM2160"
# IOBase 0xfea00000
# MemBase 0xfd000000
# VideoRam 2048
# DacSpeed 90
# Option "linear"
# Option "nolinear"
# Option "sw_cursor"
# Option "hw_cursor"
Option "no_accel"
# Option "intern_disp"
# Option "extern_disp"
# Option "mmio"
# Option "no_mmio"
# Option "lcd_center"
# Option "no_stretch"
EndSection
Section "Screen"
Driver "svga"
Device "NeoMagic"
Monitor "Generic Multisync"
DefaultColorDepth 16
Subsection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubsection
Subsection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubsection
Subsection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubsection
Subsection "Display"
Depth 32
Modes "1024x768" "800x600" "640x480"
EndSubsection
EndSection
--=-=-=
Content-Disposition: attachment; filename=XF86Config.new
Content-Description: /etc/X11/XF86Config for 3.9 snapshot from www.xfree86.org
# File generated by xf86config.
#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
#Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the Type1 and FreeType font modules
Load "type1"
Load "freetype"
# This loads the GLX module
Load "glx"
EndSection
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#
FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/X11R6/lib/modules"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 5"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for XFree86
# Option "XkbRules" "xfree86"
# Option "XkbModel" "pc101"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc101"
Option "XkbLayout" "us"
EndSection
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "wsmouse"
Option "Device" "/dev/wsmouse"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" 50
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the XF86Config man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "Generic Multisync (LCD)"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 30-64
VertRefresh 50-100
# 640x480 @ 60 Hz, 31.5 kHz hsync
Modeline "640x480" 25.175 640 664 760 800 480 491 493 525
# 800x600 @ 60 Hz, 37.8 kHz hsync
Modeline "800x600" 40 800 840 968 1056 600 601 605 628 +hsync +vsync
# 1024x768 @ 60 Hz, 48.4 kHz hsync
Modeline "1024x768" 65 1024 1032 1176 1344 768 771 777 806 -hsync -vsync
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Device configured by xf86config:
Section "Device"
Identifier "NeoMagic NM2200"
Driver "neomagic"
# unsupported card
#VideoRam 2560
# Chipset "NM2160"
# IOBase 0xfea00000
# MemBase 0xfd000000
# VideoRam 2048
# DacSpeed 90
# Option "linear"
# Option "nolinear"
# Option "sw_cursor"
# Option "hw_cursor"
Option "no_accel"
# Option "intern_disp"
# Option "extern_disp"
# Option "mmio"
# Option "no_mmio"
Option "lcd_center"
Option "no_stretch"
# Insert Clocks lines here if appropriate
# Option "NoDDC1"
# Option "NoDDC2"
Option "power_saver"
Option "pciBurst"
Option "ShadowFB"
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "NeoMagic NM2200"
Monitor "Generic Multisync (LCD)"
DefaultDepth 24
Subsection "Display"
Depth 8
Modes "1024x768" # 800x600
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1024x768"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1024x768"
ViewPort 0 0
EndSubsection
EndSection
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
--=-=-=
Content-Disposition: attachment; filename=XFree86.0.log
Content-Description: /var/log/XFree86.0.log from a NetBSDified ThinkPad 600
XFree86 Version 3.9.16 / X Window System
(protocol Version 11, revision 0, vendor release 6400)
Release Date: 31 August 1999
If the server is older than 6-12 months, or if your card is newer
than the above date, look for a newer version before reporting
problems. (see http://www.XFree86.Org/FAQ)
Operating System: NetBSD/i386 1.4K [ELF] The NetBSD Foundation, Inc.
Module Loader present
(==) Log file: "/var/log/XFree86.0.log", Time: Fri Oct 15 20:09:57 1999
(==) Using config file: "/etc/X11/XF86Config"
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (??) unknown.
(**) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "Generic Multisync (LCD)"
(**) | |-->Device "NeoMagic NM2200"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) Option "AutoRepeat" "500 5"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc101"
(**) XKB: model: "pc101"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) Using pcvt driver (version 3.32)
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.1
XFree86 Video Driver: 0.1
XFree86 XInput driver : 0.0
XFree86 Server Extension : 0.0
XFree86 Font Renderer : 0.0
(II) Loader running on netbsd
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 3.9.16, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.0
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 3.9.16, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.1
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,7190 card 0000,0000 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,7191 card 0000,0000 rev 03 class 06,04,00 hdr 01
(II) PCI: 00:02:0: chip 104c,ac1d card 2300,0000 rev 00 class 06,07,00 hdr 82
(II) PCI: 00:02:1: chip 104c,ac1d card fffc,0000 rev 00 class 06,07,00 hdr 82
(II) PCI: 00:06:0: chip 1013,6001 card 1014,1010 rev 01 class 04,01,00 hdr 00
(II) PCI: 00:07:0: chip 8086,7110 card 0000,0000 rev 02 class 06,80,00 hdr 80
(II) PCI: 00:07:1: chip 8086,7111 card 0000,0000 rev 01 class 01,01,80 hdr 00
(II) PCI: 00:07:2: chip 8086,7112 card 0000,0000 rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:07:3: chip 8086,7113 card 0000,0000 rev 02 class 06,80,00 hdr 00
(II) PCI: 01:00:0: chip 10c8,0005 card 1014,00dd rev 12 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(--) PCI: (1:0:0) Neomagic NM2200 rev 18, Mem @ 0xe0000000/24, 0x70000000/22, 0x70400000/20
(II) Addressable resource ranges are
[0] -1 0x00000000 - 0xffffffff (0x0) MXB
[1] -1 0x00000000 - 0x0000ffff (0x10000) IXB
(II) PCI Memory Resource overlap for 0x50000000 at 0x501fffff
(II) PCI Memory Resource overlap for 0x50100000 at 0x501fffff
(II) PCI Memory Resource overlap for 0x40000000 at 0x704fffff
(II) Non-system PCI resource ranges:
[0] -1 0x70400000 - 0x704fffff (0x100000) MXB(B)
[1] -1 0x70000000 - 0x703fffff (0x400000) MXB(B)
[2] -1 0xe0000000 - 0xe0ffffff (0x1000000) MXB(B)
(II) System PCI resource ranges:
[0] -1 0x50000000 - 0x5fffffff (0x10000000) MXBE
[1] -1 0x50100000 - 0x501fffff (0x100000) MXBE
[2] -1 0x40000000 - 0x7fffffff (0x40000000) MXBE
[3] -1 0x00008400 - 0x000084ff (0x100) IXBE
[4] -1 0x0000fcf0 - 0x0000fcff (0x10) IXBE
(II) System PCI resource ranges after removing overlaps:
[0] -1 0x50000000 - 0x500fffff (0x100000) MXBE
[1] -1 0x50100000 - 0x501fffff (0x100000) MXBE
[2] -1 0x40000000 - 0x4fffffff (0x10000000) MXBE
[3] -1 0x00008400 - 0x000084ff (0x100) IXBE
[4] -1 0x0000fcf0 - 0x0000fcff (0x10) IXBE
(II) OS-reported resource ranges:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MXB(B)
[1] -1 0xfee00000 - 0xfeefffff (0x100000) MXB(B)
[2] -1 0xfec00000 - 0xfecfffff (0x100000) MXB(B)
[3] -1 0x00100000 - 0x3fffffff (0x3ff00000) MXB(B)
[4] -1 0x000f0000 - 0x000fffff (0x10000) MXB
[5] -1 0x00000000 - 0x0009ffff (0xa0000) MXB
[6] -1 0x00000000 - 0x000001ff (0x200) IXB
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MXB(B)
[1] -1 0xfee00000 - 0xfeefffff (0x100000) MXB(B)
[2] -1 0xfec00000 - 0xfecfffff (0x100000) MXB(B)
[3] -1 0x00100000 - 0x3fffffff (0x3ff00000) MXB(B)
[4] -1 0x000f0000 - 0x000fffff (0x10000) MXB
[5] -1 0x00000000 - 0x0009ffff (0xa0000) MXB
[6] -1 0x00000000 - 0x000001ff (0x200) IXB
(II) All system resource ranges:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MXB(B)
[1] -1 0xfee00000 - 0xfeefffff (0x100000) MXB(B)
[2] -1 0xfec00000 - 0xfecfffff (0x100000) MXB(B)
[3] -1 0x00100000 - 0x3fffffff (0x3ff00000) MXB(B)
[4] -1 0x000f0000 - 0x000fffff (0x10000) MXB
[5] -1 0x00000000 - 0x0009ffff (0xa0000) MXB
[6] -1 0x50000000 - 0x500fffff (0x100000) MXBE
[7] -1 0x50100000 - 0x501fffff (0x100000) MXBE
[8] -1 0x40000000 - 0x4fffffff (0x10000000) MXBE
[9] -1 0x00000000 - 0x000001ff (0x200) IXB
[10] -1 0x00008400 - 0x000084ff (0x100) IXBE
[11] -1 0x0000fcf0 - 0x0000fcff (0x10) IXBE
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x88 (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0x0000d000 - 0x0000dfff (0x1000) IXB
(II) Bus 1 non-prefetchable memory range:
[0] -1 0x70000000 - 0xdfffffff (0x70000000) MXB
(II) Bus 1 prefetchable memory range:
[0] -1 0xe0000000 - 0xf7ffffff (0x18000000) MXB
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 3.9.16, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 3.9.16, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.0
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 3.9.16, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.0
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 3.9.16, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.0
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 3.9.16, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.0
(II) Loading extension GLX
(II) Loading sub module "libGLcore"
(II) LoadModule: "libGLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 3.9.16, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.0
(II) LoadModule: "neomagic"
(II) Loading /usr/X11R6/lib/modules/drivers/neomagic_drv.o
(II) Module neomagic: vendor="The XFree86 Project"
compiled for 3.9.16, module version = 1.0.0
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.1
(II) NEOMAGIC: Driver for Neomagic chipsets: neo2070, neo2090, neo2093,
neo2097, neo2160, neo2200
setting up HOST: 0
setting up PCI: 1
pciIo_MemAccessDisable: 0x10000
NEOMAGIC instances found: 0
(--) Assigning device section with no busID to primary device
(--) Chipset neo2200 found
NEOMAGIC: card at 1:0:0 is claimed by a Device section
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0x70400000 - 0x704fffff (0x100000) MXB(B)
[1] -1 0x70000000 - 0x703fffff (0x400000) MXB(B)
[2] -1 0xe0000000 - 0xe0ffffff (0x1000000) MXB(B)
[3] -1 0xffe00000 - 0xffffffff (0x200000) MXB(B)
[4] -1 0xfee00000 - 0xfeefffff (0x100000) MXB(B)
[5] -1 0xfec00000 - 0xfecfffff (0x100000) MXB(B)
[6] -1 0x00100000 - 0x3fffffff (0x3ff00000) MXB(B)
[7] -1 0x000f0000 - 0x000fffff (0x10000) MXB
[8] -1 0x00000000 - 0x0009ffff (0xa0000) MXB
[9] -1 0x50000000 - 0x500fffff (0x100000) MXBE
[10] -1 0x50100000 - 0x501fffff (0x100000) MXBE
[11] -1 0x40000000 - 0x4fffffff (0x10000000) MXBE
[12] -1 0x00000000 - 0x000001ff (0x200) IXB
[13] -1 0x00008400 - 0x000084ff (0x100) IXBE
[14] -1 0x0000fcf0 - 0x0000fcff (0x10) IXBE
(II) to be registered later:
[0] 0 0x000b8000 - 0x000bffff (0x8000) MSB
[1] 0 0x000b0000 - 0x000b7fff (0x8000) MSB
[2] 0 0x000a0000 - 0x000affff (0x10000) MSB
[3] 0 0x000003c0 - 0x000003df (0x20) ISB
[4] 0 0x000003b0 - 0x000003bb (0xc) ISB
(II) Sys:
(II) avoid:
(II) prefetchable Memory:
(II) MEM/IO:
[0] -1 0x00000000 - 0xffffffff (0x0) MXB
[1] -1 0x00000000 - 0x0000ffff (0x10000) IXB
(II) own:
[0] -1 0x70400000 - 0x704fffff (0x100000) MXB
[1] -1 0x70000000 - 0x703fffff (0x400000) MXB
(II) own:
[0] -1 0x70400000 - 0x704fffff (0x100000) MXB
(II) own:
(II) own:
(II) own:
(II) own:
(II) resource ranges after probing:
[0] -1 0x70400000 - 0x704fffff (0x100000) MXB(B)
[1] -1 0x70000000 - 0x703fffff (0x400000) MXB(B)
[2] -1 0xe0000000 - 0xe0ffffff (0x1000000) MXB(B)
[3] -1 0xffe00000 - 0xffffffff (0x200000) MXB(B)
[4] -1 0xfee00000 - 0xfeefffff (0x100000) MXB(B)
[5] -1 0xfec00000 - 0xfecfffff (0x100000) MXB(B)
[6] -1 0x00100000 - 0x3fffffff (0x3ff00000) MXB(B)
[7] -1 0x000f0000 - 0x000fffff (0x10000) MXB
[8] -1 0x00000000 - 0x0009ffff (0xa0000) MXB
[9] -1 0x50000000 - 0x500fffff (0x100000) MXBE
[10] -1 0x50100000 - 0x501fffff (0x100000) MXBE
[11] -1 0x40000000 - 0x4fffffff (0x10000000) MXBE
[12] 0 0x000a0000 - 0x000affff (0x10000) MSB
[13] 0 0x000b0000 - 0x000b7fff (0x8000) MSB
[14] 0 0x000b8000 - 0x000bffff (0x8000) MSB
[15] -1 0x00000000 - 0x000001ff (0x200) IXB
[16] -1 0x00008400 - 0x000084ff (0x100) IXBE
[17] -1 0x0000fcf0 - 0x0000fcff (0x10) IXBE
[18] 0 0x000003b0 - 0x000003bb (0xc) ISB
[19] 0 0x000003c0 - 0x000003df (0x20) ISB
(II) Setting vga for screen 0.
Enable access 0
pciSetBusAccess: route VGA to bus 1
pciIo_MemAccessEnable: 0x10000
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 3.9.16, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.1
(II) NEOMAGIC(0): Chipset is a MagicMedia 256AV (NM2200)
(--) NEOMAGIC(0): Panel is a 1024x768 color TFT display
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 3.9.16, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.1
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
compiled for 3.9.16, module version = 1.2.0
ABI class: XFree86 Video Driver, version 0.1
(II) NEOMAGIC(0): I2C bus "I2C bus" initialized.
(II) NEOMAGIC(0): I2C device "I2C bus:ddc2" registered.
(II) NEOMAGIC(0): I2C device "I2C bus:ddc2" removed.
(**) NEOMAGIC(0): Depth 24, (--) framebuffer bpp 24
(==) NEOMAGIC(0): RGB weight 888
(==) NEOMAGIC(0): Default visual is TrueColor
(**) NEOMAGIC(0): Option "NoAccel"
(**) NEOMAGIC(0): Option "LcdCenter"
(**) NEOMAGIC(0): Option "ShadowFB"
(**) NEOMAGIC(0): Option "NoStretch"
(**) NEOMAGIC(0): Option "pciBurst"
shadow
(**) NEOMAGIC(0): Low resolution video modes are not stretched
(**) NEOMAGIC(0): Video modes are centered on the display
(==) NEOMAGIC(0): using linear mode
(**) NEOMAGIC(0): using PCI Burst mode
(**) NEOMAGIC(0): Using "Shadow Framebuffer" - acceleration disabled
(--) NEOMAGIC(0): base address is set at 0xE0000000.
(--) NEOMAGIC(0): base address is set at 0x70000000.
(II) Resources after driver initialization
[0] 0 0x70400000 - 0x704fffff (0x100000) MXB
[1] 0 0x70000000 - 0x703fffff (0x400000) MXB
[2] 0 0xe0000000 - 0xe0ffffff (0x1000000) MXB
[3] -1 0x70400000 - 0x704fffff (0x100000) MXB(B)
[4] -1 0x70000000 - 0x703fffff (0x400000) MXB(B)
[5] -1 0xe0000000 - 0xe0ffffff (0x1000000) MXB(B)
[6] -1 0xffe00000 - 0xffffffff (0x200000) MXB(B)
[7] -1 0xfee00000 - 0xfeefffff (0x100000) MXB(B)
[8] -1 0xfec00000 - 0xfecfffff (0x100000) MXB(B)
[9] -1 0x00100000 - 0x3fffffff (0x3ff00000) MXB(B)
[10] -1 0x000f0000 - 0x000fffff (0x10000) MXB
[11] -1 0x00000000 - 0x0009ffff (0xa0000) MXB
[12] -1 0x50000000 - 0x500fffff (0x100000) MXBE
[13] -1 0x50100000 - 0x501fffff (0x100000) MXBE
[14] -1 0x40000000 - 0x4fffffff (0x10000000) MXBE
[15] 0 0x000a0000 - 0x000affff (0x10000) MSB
[16] 0 0x000b0000 - 0x000b7fff (0x8000) MSB
[17] 0 0x000b8000 - 0x000bffff (0x8000) MSB
[18] -1 0x00000000 - 0x000001ff (0x200) IXB
[19] -1 0x00008400 - 0x000084ff (0x100) IXBE
[20] -1 0x0000fcf0 - 0x0000fcff (0x10) IXBE
[21] 0 0x000003b0 - 0x000003bb (0xc) ISB
[22] 0 0x000003c0 - 0x000003df (0x20) ISB
(--) NEOMAGIC(0): VideoRAM: 2560 kByte
(--) NEOMAGIC(0): Max Clock: 110000 kByte
(II) NEOMAGIC(0): clock range: 11.00 to 110.00 MHz
(II) NEOMAGIC(0): Removing mode (640x350) that won't display properly on LCD
(WW) NEOMAGIC(0): Mode "640x350" deleted (unknown reason)
(II) NEOMAGIC(0): Removing mode (640x400) that won't display properly on LCD
(WW) NEOMAGIC(0): Mode "640x400" deleted (unknown reason)
(II) NEOMAGIC(0): Removing mode (720x400) that won't display properly on LCD
(WW) NEOMAGIC(0): Mode "720x400" deleted (unknown reason)
(WW) NEOMAGIC(0): Mode "1280x960" deleted (insufficient memory for mode)
(WW) NEOMAGIC(0): Mode "1280x1024" deleted (insufficient memory for mode)
(--) NEOMAGIC(0): Virtual size is 1024x768 (pitch 1024)
(**) NEOMAGIC(0): Mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(==) NEOMAGIC(0): DPI set to (75, 75)
(II) Loading sub module "xf24_32bpp"
(II) LoadModule: "xf24_32bpp"
(II) Loading /usr/X11R6/lib/modules/libxf24_32bpp.a
(II) Module xf24_32bpp: vendor="The XFree86 Project"
compiled for 3.9.16, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.1
(II) Loading sub module "cfb24"
(II) LoadModule: "cfb24"
(II) Loading /usr/X11R6/lib/modules/libcfb24.a
(II) Module cfb24: vendor="The XFree86 Project"
compiled for 3.9.16, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.1
(II) Loading sub module "cfb"
(II) LoadModule: "cfb"
(II) Loading /usr/X11R6/lib/modules/libcfb.a
(II) Module cfb: vendor="The XFree86 Project"
compiled for 3.9.16, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.1
(II) Loading sub module "mfb"
(II) LoadModule: "mfb"
(II) Loading /usr/X11R6/lib/modules/libmfb.a
(II) Module mfb: vendor="The XFree86 Project"
compiled for 3.9.16, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.1
(II) Loading sub module "cfb32"
(II) LoadModule: "cfb32"
(II) Loading /usr/X11R6/lib/modules/libcfb32.a
(II) Module cfb32: vendor="The XFree86 Project"
compiled for 3.9.16, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.1
(II) Loading sub module "cfb"
(II) LoadModule: "cfb"
(II) Reloading /usr/X11R6/lib/modules/libcfb.a
(II) Loading sub module "mfb"
(II) LoadModule: "mfb"
(II) Reloading /usr/X11R6/lib/modules/libmfb.a
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 3.9.16, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.1
(II) Loading sub module "shadowfb"
(II) LoadModule: "shadowfb"
(II) Loading /usr/X11R6/lib/modules/libshadowfb.a
(II) Module shadowfb: vendor="The XFree86 Project"
compiled for 3.9.16, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.1
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 3.9.16, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.1
(==) Depth 24 pixmap format is 32 bpp
do I need RAC?
No, I don't.
(II) resource ranges after preInit:
[0] 0 0x70400000 - 0x704fffff (0x100000) MXB
[1] 0 0x70000000 - 0x703fffff (0x400000) MXB
[2] 0 0xe0000000 - 0xe0ffffff (0x1000000) MXB
[3] -1 0x70400000 - 0x704fffff (0x100000) MXB(B)
[4] -1 0x70000000 - 0x703fffff (0x400000) MXB(B)
[5] -1 0xe0000000 - 0xe0ffffff (0x1000000) MXB(B)
[6] -1 0xffe00000 - 0xffffffff (0x200000) MXB(B)
[7] -1 0xfee00000 - 0xfeefffff (0x100000) MXB(B)
[8] -1 0xfec00000 - 0xfecfffff (0x100000) MXB(B)
[9] -1 0x00100000 - 0x3fffffff (0x3ff00000) MXB(B)
[10] -1 0x000f0000 - 0x000fffff (0x10000) MXB
[11] -1 0x00000000 - 0x0009ffff (0xa0000) MXB
[12] -1 0x50000000 - 0x500fffff (0x100000) MXBE
[13] -1 0x50100000 - 0x501fffff (0x100000) MXBE
[14] -1 0x40000000 - 0x4fffffff (0x10000000) MXBE
[15] 0 0x000a0000 - 0x000affff (0x10000) MSB
[16] 0 0x000b0000 - 0x000b7fff (0x8000) MSB
[17] 0 0x000b8000 - 0x000bffff (0x8000) MSB
[18] -1 0x00000000 - 0x000001ff (0x200) IXB
[19] -1 0x00008400 - 0x000084ff (0x100) IXBE
[20] -1 0x0000fcf0 - 0x0000fcff (0x10) IXBE
[21] 0 0x000003b0 - 0x000003bb (0xc) ISB
[22] 0 0x000003c0 - 0x000003df (0x20) ISB
Enable access 0
(II) NEOMAGIC(0): Using linear framebuffer at: 0xE0000000
(--) NEOMAGIC(0): 262144 bytes off-screen memory available
(II) NEOMAGIC(0): Using H/W Cursor.
(==) NEOMAGIC(0): Backing store disabled
(WW) NEOMAGIC(0): Option "power_saver" is not used
PostScreenInit generation: 1
(II) Setting vga for screen 0.
Entering OPERATING state
Enable access 0
(**) Option "Protocol" "wsmouse"
(**) Mouse1: Protocol: wsmouse
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/wsmouse"
(==) Mouse1: Buttons: 3
(II) Keyboard "Keyboard1" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
Removing /usr/X11R6/lib/X11/fonts/Speedo/ from the valid list of fontpaths
Removing /usr/local/share/fonts from the valid list of fontpaths
--=-=-=--