Greetings,

We are seeing a problem with the Intel 10/100 also now. Still works, but
there may be a problem with the driver on this one. We have it on a 100mb
switch and only get 2mb / sec or so moving a 1 gig file back and forth.
It may also be something involving the IDE (pciide0) may be just running
out of interupt processing glue? (Only a guess on my part).

Jeff Northon

===========
ppb1 at pci0 dev 7 function 3: vendor 0x1106 product 0x3040 (rev. 0x10)
ppb1: not configured by system firmware
fxp0 at pci0 dev 8 function 0: Intel EtherExpress Pro 10+/100B Ethernet   
fxp0: interrupting at irq 11
fxp0: Ethernet address 00:90:27:65:da:91
OUI 0x00aa00 model 0x0015 rev 4 at fxp0 phy 1 not configured
isa0 at pcib0

===========

dmesg

cpu0: family 5 model 8 step c
cpu0: AMD K6-2 (586-class)
real mem  = 267976704
avail mem = 246444032
using 2822 buffers containing 13500416 bytes of memory
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o enabled, memory enabled
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x1106 product 0x0597 (rev. 0x04)
ppb0 at pci0 dev 1 function 0: vendor 0x1106 product 0x8598 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o enabled, memory enabled
vga1 at pci1 dev 0 function 0: vendor 0x1039 product 0x6326 (rev. 0x0b)
wsdisplay0 at vga1: console (80x25, vt100 emulation)
pcib0 at pci0 dev 7 function 0
pcib0: vendor 0x1106 product 0x0586 (rev. 0x47)
pciide0 at pci0 dev 7 function 1: VIA Technologies VT82C586A IDE
Controller
pciide0: bus-master DMA support present
pciide0: primary channel configured to compatibility mode
wd0 at pciide0 channel 0 drive 0: <WDC AC28400R>
wd0: drive supports 16-sector pio transfers, lba addressing
wd0: 8063MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 16514064 sectors
wd0: 32-bits data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4, Ultra-DMA
mode 3
, Ultra-DMA mode 2
pciide0: primary channel interrupting at irq 14
pciide0: secondary channel configured to compatibility mode
wd1 at pciide0 channel 1 drive 0: <WDC AC28400R>
wd1: drive supports 16-sector pio transfers, lba addressing
wd1: 8063MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 16514064 sectors
wd1: 32-bits data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4, Ultra-DMA
mode 3
, Ultra-DMA mode 2
pciide0: secondary channel interrupting at irq 15
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data
transfers
)
wd1(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data
transfers
)
ppb1 at pci0 dev 7 function 3: vendor 0x1106 product 0x3040 (rev. 0x10)
ppb1: not configured by system firmware
fxp0 at pci0 dev 8 function 0: Intel EtherExpress Pro 10+/100B Ethernet
fxp0: interrupting at irq 11
fxp0: Ethernet address 00:90:27:65:da:91
OUI 0x00aa00 model 0x0015 rev 4 at fxp0 phy 1 not configured
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
opmsprobe: command error
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug 'n Play devices found
biomask c040 netmask c840 ttymask c842
wscons: wskbd0 glued to wsdisplay0 (console)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
IP Filter: initialized.  Default = pass all, Logging = enabled
fxp0: device timeout
fxp0: device timeout