Jonathan Stone wrote:

> I've put repackaged, preliminary CardBus patches for 1.4 in
>      ftp://ftp.netbsd.org/pub/incoming/jonathan/cardbus-1.4-9990428.tgz
>
> Again, these are HAYAKAWA Koichi's CardBus patches, pretty much
> verbatim.  All I've done is repackage them to patch against 1.4.

OK, here's the report from one guinea-pig:

I have a NEC Versa 6050MX witha TI1130 CardBus controller.

* If I boot with no cards inserted the machine comes up, but plugging
  and unplugging cards (PCMCIA and/or CardBus) does not cause
  any reaction.
* If I boot with a CardBus card inserted (a USB controller) it finds the
  card, but something goes wrong.  See dmesg output below.
  Not how the 82437MX is attached to cbb0.
* If I boot with a PCMCIA 3Com 3C589C card inserted the kernel
  hangs right after it has printed a line with info that start with `ep0
at ...'.
  I can copy it by hand if you need more info.  The machine has to be
reset
  to wake up.

I'll be happy to run more tests.


--

        -- Lennart

cbb0 at pci0 dev 3 function 0 (TI1130), flags 3
i386_uni_space_alloc: addr 0, size 1000, mask fff, align 1000
changing intrline 255 to 10
CardBus latency time 0x10
PCI latency time 0x10
cbb0: interrupting at irq 10
cardbus0 at cbb0 bus 0 device 0
cardbusattach: CardBus card found [0x2]
cardbus_attach_card: cb0 start
cardbus_attach_card: Vendor 0x8086, Product 0x1235, CIS 0x0
WRONG TUPLE
Intel 82437MX Mobile System Controller (MTSC) (host bridge, revision 0x02)
at cardbus0 dev 0 function 0 not configured
pcmcia0 at cbb0 slot 0
cbb1 at pci0 dev 3 function 1 (TI1130), flags 3
i386_uni_space_alloc: addr 0, size 1000, mask fff, align 1000
changing intrline 255 to 10
CardBus latency time 0x10
PCI latency time 0x10
cbb1: interrupting at irq 10
cardbus1 at cbb1 bus 0 device 0
pcmcia1 at cbb1 slot 1