Ive been getting some strange messages upon boot. I dont think UDMA is w
orking every boot . actually sometimes my cdrom is not even detected. As the
first example depicts this. Notice no cd0 !!


heres some messages from a previous boot:

Apr  3 09:33:46 SuperU /netbsd: pciide0: bus-master DMA support present
Apr  3 09:33:46 SuperU /netbsd: pciide0: primary channel wired to compatibility
mode
Apr  3 09:33:46 SuperU /netbsd: atapibus0 at pciide0 channel 0
Apr  3 09:33:46 SuperU /netbsd: wdc_atapi_get_params: drive 0 not present
Apr  3 09:33:46 SuperU /netbsd: wdc_atapi_get_params: ATAPI_IDENTIFY_DEVICE
failed for drive pcii
de0:0:1: error 0x0
Apr  3 09:33:46 SuperU /netbsd: wd0 at pciide0 channel 0 drive 0wdattach
Apr  3 09:33:46 SuperU /netbsd: : <Maxtor 90432D3>
Apr  3 09:33:46 SuperU /netbsd: wd0: drive supports 16-sector pio transfers,
lba addressing
Apr  3 09:33:46 SuperU /netbsd: wd0: 4121MB, 8374 cyl, 16 head, 63 sec, 512
bytes/sect x 8440992 
sectors
Apr  3 09:33:46 SuperU /netbsd: wd0: atap_dmatiming_mimi=120,
atap_dmatiming_recom=120
Apr  3 09:33:46 SuperU /netbsd: wd0: 32-bits data port
Apr  3 09:33:46 SuperU /netbsd: wd0: drive supports PIO mode 4, DMA mode 2,
Ultra-DMA mode 2
Apr  3 09:33:46 SuperU /netbsd: pciide0: secondary channel wired to
compatibility mode
Apr  3 09:33:46 SuperU /netbsd: atapibus1 at pciide0 channel 1
Apr  3 09:33:46 SuperU /netbsd: wdc_atapi_get_params: drive 0 not present

heres a message from rebooting .Notice cd0 !!


pciide0 at pci0 dev 0 function 1: Silicon Integrated System 5597/5598 IDE
controller
pciide0: bus-master DMA support present
pciide0: primary channel wired to compatibility mode
atapibus0 at pciide0 channel 0
wdc_atapi_get_params: drive 0 not present
cd0 at atapibus0 drive 1: <ATAPI CDROM, , V1.20> type 5 cdrom removable
cd0: 32-bits data port
cd0: drive supports PIO mode 4, DMA mode 1
wd0 at pciide0 channel 0 drive 0wdattach
: <Maxtor 90432D3>
wd0: drive supports 16-sector pio transfers, lba addressing
wd0: 4121MB, 8374 cyl, 16 head, 63 sec, 512 bytes/sect x 8440992 sectors
wd0: atap_dmatiming_mimi=120, atap_dmatiming_recom=120
wd0: 32-bits data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2
pciide0: secondary channel wired to compatibility mode
atapibus1 at pciide0 channel 1
wdc_atapi_get_params: drive 0 not present
sd0 at atapibus1 drive 1: <IOMEGA  ZIP 100       ATAPI, , 14.A> type 0 direct
removable
sd0: drive offline
sd0: 32-bits data port
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data transfers)
cd0(pciide0:0:1): using PIO mode 3, DMA mode 1 (using DMA data transfers)
sd0(pciide0:1:1): using PIO mode 3

Thanks for being here !!

Cheers.


----------------------------------
Tony Hernandez ::: Intellon Corporation
            MCP    A+
       Workstation Administrator
----------------------------------