Hi there,

so here it is, my dmesg output with some comments maybe someone has some
ideas.
The machine is working so far, but the sound card is not working.

----

NetBSD 1.3.2 (TheMasterI) #0: Sun Aug 23 10:14:27 PDT 1998
    root@themaster:/usr/src/sys/arch/i386/compile/TheMasterI
cpu0: family 5 model 6 step 2
cpu0: AMD K6 (586-class)
real mem  = 66711552
avail mem = 63492096
using 839 buffers containing 3436544 bytes of memory
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
Acer Labs product 0x1531 (host bridge, revision 0xb3) at pci0 dev 0 function 0
not configured
Acer Labs product 0x1533 (ISA bridge, revision 0xb4) at pci0 dev 2 function 0
not configured

Well, this two lines above are looking a little bit strange  I think. Why are
those two bridges are stated as not configured ? And what to do about that
issue ?

Cirrus Logic product 0x00bc (VGA display, revision 0x23) at pci0 dev 3
function 0 not configured

Ok, this one will be configured by the X Server later, or ?

ne0 at pci0 dev 4 function 0: Winbond 89C940F Ethernet
ne0: Ethernet address 00:20:18:81:90:fa
ne0: interrupting at irq 11

The Ethernet card is working properly.

Acer Labs product 0x5229 (IDE mass storage, interface 0xfa, revision 0x20) at
pci0 dev 11 function 0 not configured

This was probed and configured right as I checked the IDE patches from Manuel
some times.

isa0 at mainbus0

Ok, the ISA bus probed right.

com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
lpt0 at isa0 port 0x378-0x37b irq 7

com and lpt ports are also working.

wdc1 at isa0 port 0x170-0x177 irq 15
atapibus0 at wdc1
cd0 at atapibus0 drive 1: <LTN301, , OL28> type 5 cdrom removable
wd0 at wdc1 drive 0: <IBM-DHEA-36480>
wd0: using 16-sector 16-bit pio transfers, lba mode
wd0: 6197MB, 12692736 sec, 512 bytes/sec
npx0 at isa0 port 0xf0-0xff: using exception 16
pc0 at isa0 port 0x60-0x6f irq 1: color
pc0: console
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec

isapnp0 at isa0 port 0x279: read port 0x203
isapnp0: <PnP Sound Chip, @@@1001, , > port 0x220/16 irq 5 drq 1,0 not
configured
isapnp0: <PnP Sound Chip, @H@1001, , > port 0x388/8 not configured
isapnp0: <PnP Sound Chip, @P@1001, , > port 0x200/8 not configured
isapnp0: <PnP Sound Chip, @X@1001, , > port 0x330/2 irq 9 not configured

This is what makes me  a little bit nervous. Whats going on there ? Might be a
problem with the PnP stuff ?
The card has an ALi 100+ chipset and is not the best one but cheap.

biomask 8040 netmask 8840 ttymask 88c2
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs

---

Any ideas and suggestions are welcome.

Bye for now, Tobias