--==_Exmh_1096458186P
Content-Type: multipart/mixed ;
	boundary="==_Exmh_10963266130"

This is a multipart MIME message.

--==_Exmh_10963266130
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: 8bit

Now that I learned how to dmesg without dmesg, I attached it.

Grüße
        Oskar


--==_Exmh_10963266130
Content-Type: text/plain ; name="msgbuf"; charset=iso-8859-1
Content-Description: msgbuf
Content-Disposition: attachment; filename="msgbuf"
Content-Transfer-Encoding: 8bit

NetBSD 1.3I (INSTALL) #7: Mon Feb  1 15:43:15 MET 1999
    he@hugin.runit.sintef.no:/usr/src/sys/arch/i386/compile/INSTALL
cpu0: family 6 model 3 step 4
cpu0: Intel Pentium II (686-class)
real mem  = 133820416
avail mem = 120635392
using 1659 buffers containing 6795264 bytes of memory
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o enabled, memory enabled
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x1237 (rev. 0x02)
pcib0 at pci0 dev 7 function 0
pcib0: vendor 0x8086 product 0x7110 (rev. 0x01)
pciide0 at pci0 dev 7 function 1: Intel 82371AB IDE controller (PIIX4)
pciide0: device disabled (at device)
vendor 0x8086 product 0x7112 (USB serial bus, revision 0x01) at pci0 dev 7 function 2 not configured
vendor 0x8086 product 0x7113 (miscellaneous bridge, revision 0x01) at pci0 dev 7 function 3 not configured
ppb0 at pci0 dev 17 function 0: vendor 0x1011 product 0x0024 (rev. 0x02)
pci1 at ppb0 bus 1
pci1: i/o enabled, memory enabled
ppb1 at pci1 dev 8 function 0: vendor 0x1011 product 0x0001 (rev. 0x02)
pci2 at ppb1 bus 2
pci2: i/o enabled, memory enabled
ahc1 at pci2 dev 4 function 0
ahc1: interrupting at irq 10
ahc1: aic7880 Wide Channel A, SCSI Id=7, 16 SCBs
scsibus0 at ahc1 channel 0: 16 targets, 8 luns per target
ahc1: target 0 using 16Bit transfers
ahc1: target 0 synchronous at 10.0MHz, offset = 0x8
sd0 at scsibus0 targ 0 lun 0: <QUANTUM, VIKING II 4.5WLS, 4110> SCSI2 0/direct fixed
sd0: 4095MB, 5899 cyl, 10 head, 142 sec, 512 bytes/sect x 8388315 sectors
ahc1: target 1 using 16Bit transfers
ahc1: target 1 synchronous at 10.0MHz, offset = 0x8
sd1 at scsibus0 targ 1 lun 0: <QUANTUM, VIKING II 4.5WLS, 4110> SCSI2 0/direct fixed
sd1: 4095MB, 5899 cyl, 10 head, 142 sec, 512 bytes/sect x 8388315 sectors
ahc2 at pci2 dev 5 function 0
ahc2: interrupting at irq 15
ahc2: aic7880 Wide Channel B, SCSI Id=7, 16 SCBs
scsibus1 at ahc2 channel 0: 16 targets, 8 luns per target
ahc2: target 0 using 16Bit transfers
ahc2: target 0 synchronous at 10.0MHz, offset = 0x8
sd2 at scsibus1 targ 0 lun 0: <QUANTUM, VIKING II 4.5WLS, 4110> SCSI2 0/direct fixed
sd2: 4095MB, 5899 cyl, 10 head, 142 sec, 512 bytes/sect x 8388315 sectors
ahc2: target 1 using 16Bit transfers
ahc2: target 1 synchronous at 10.0MHz, offset = 0x8
sd3 at scsibus1 targ 1 lun 0: <QUANTUM, VIKING II 4.5WLS, 4110> SCSI2 0/direct fixed
sd3: 4095MB, 5899 cyl, 10 head, 142 sec, 512 bytes/sect x 8388315 sectors
de0 at pci1 dev 9 function 0: unable to map device registers
vendor 0x5333 product 0x8901 (VGA display, revision 0x16) at pci0 dev 18 function 0 not configured
ahc3 at pci0 dev 19 function 0
ahc3: interrupting at irq 14
ahc3: aic7880 Wide Channel, SCSI Id=7, 16 SCBs
scsibus2 at ahc3 channel 0: 16 targets, 8 luns per target
ahc3: target 5 synchronous at 10.0MHz, offset = 0x8
cd0 at scsibus2 targ 5 lun 0: <TOSHIBA, CD-ROM XM-5701TA, 0557> SCSI2 5/cdrom removable
de1 at pci0 dev 20 function 0
de1: interrupting at irq 5
de1: DEC 21143 [10-100Mb/s] pass 3.0
de1: address 00:00:f8:7c:3a:ff
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
pc0 at isa0 port 0x60-0x6f irq 1: color
pc0: console
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: no ISA Plug 'n Play devices found
biomask c440 netmask c460 ttymask c462
<3>stray interrupt 7
md0: internal 1587K image area
boot device: fd0
root on md0a dumps on md0b
root file system type: ffs
de1: enabling 10baseT port
WARNING: old BSD partition ID!
sd1: no disk label
sd2: no disk label
<3>uid 0 on /: file system full

--==_Exmh_10963266130--



--==_Exmh_1096458186P
Content-Type: application/pgp-signature

-----BEGIN PGP MESSAGE-----
Version: 2.6.3i

iQCVAwUBNrhMWrA63tqjeAhZAQEwZwP9EBpIItEP7genyI057TqipFqWumAx5Dvq
o24NFskas21/M281J244h9+1NnvdpSM8HZM/mFY419924VqljPjtt9o9npXUGSke
swUtrV2W1enP2vRbOU+6rYC4rfiwqt6kKfh0PJHlg7XhUdQTMFGwzZtSrYs22vKa
X8VxC662DKc=
=0i/C
-----END PGP MESSAGE-----

--==_Exmh_1096458186P--