This is a multi-part message in MIME format.
--------------DB7E9F20CA13315083A9D4C0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Greetings:

A friend of my experienced in servicing laptops managed to take apart my
new Fujitsu FMV-Biblo MCVIII23 hand held computer, and remove the hard
drive, which allowed me to install the lastest snapshot with NetBSD 1.3I
ix86.  I also installed XFree86 3.3 with its NeoGraphics chipset support,
and built a kernel with working X and PCMCIA cards (ethernet, SCSI, etc.).
:-)  Unfortunately I still can't get the internal 56 kbps V.90 modem or
USB ports to work.

I've compiled many different NetBSD 1.3I ix86 kernels with the universal
host controller and/or the open host controller support.  Only the
universal host controller is detected, but it is detected with an error
stating that it cannot map the io space, and the actual USB bus is not
detected.

Below is an except from the kernel configuration I used with the USB stuff:

    # PCI USB controllers
    uhci*   at pci?    # Universal Host Controller (Intel)
    #ohci*  at pci?    # Open Host Controller

    # USB bus support 
    usb*    at uhci?
    #usb*   at ohci?

And during boot, I get the following USB excerpt in my boot messages:

     uhci0 at pci0 dev 1 function 2: Intel 82371AB USB Host Controller
              (PIIX4) (rev. 0x01)
     uhci0: can't map i/o space

Also, the internal 56 kbps V.90 does not detect properly, even with PNP.
I get the following modem excerpt in my boot messages:

     Rockwell Semiconductor Systems product 0x2015 (miscellaneous
              communications, revision 0x01) at pci0 dev 16 function 0
              not configured

I will try to get the modem details (irq, vector address, etc.) from 
Fujitsu in Japan.  Perhaps I can map the modem as a com port.  I'm not
sure if it will work or what else I can do to get the USB and modem to
work.

Thank you in advance for any help.  Sincerely, Alicia.

PS. I am using a PCIC_ISA_INTR_ALLOC_MASK of 0x8600 in order to prevent
	NetBSD from assigning low (less than 9) irq values to the PCMCIA
	cards.  I can't seem to figure out what mask values correspond
	to what blocked irq's.  Is it some type of formula?  If so what?

PPS. Here is a copy of the entire boot messages:

NetBSD 1.3I (BIBLO) #1: Sat Dec 19 22:53:35 EST 1998
    alicia@luna:/usr/src/sys/arch/i386/compile/BIBLO
cpu0: family 5 model 8 step 1
cpu0: Intel Pentium (586-class)
real mem  = 66633728
avail mem = 54542336
using 2500 buffers containing 8388608 bytes of memory
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o enabled, memory enabled
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82439TX System Controller (MTXC) (rev. 0x01)
pcib0 at pci0 dev 1 function 0
pcib0: Intel 82371AB PCI-to-ISA Bridge (PIIX4) (rev. 0x02)
pciide0 at pci0 dev 1 function 1: Intel 82371AB IDE controller (PIIX4)
pciide0: bus-master DMA support present
pciide0: primary channel wired to compatibility mode
wd0 at pciide0 channel 0 drive 0: <FUJITSU MHD2032AT>
wd0: drive supports 16-sector pio transfers, lba addressing
wd0: 3102MB, 6304 cyl, 16 head, 63 sec, 512 bytes/sect x 6354432 sectors
wd0: 32-bits data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2
pciide0: secondary channel wired to compatibility mode
pciide0: secondary channel ignored (disabled)
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data transfers)
uhci0 at pci0 dev 1 function 2: Intel 82371AB USB Host Controller (PIIX4) (rev.
0x01)
uhci0: can't map i/o space
Intel 82371AB Power Management Controller (PIIX4) (miscellaneous bridge,
revision 0x02) at pci0 dev 1 fun
ction 3 not configured
Rockwell Semiconductor Systems product 0x2015 (miscellaneous communications,
revision 0x01) at pci0 dev 1
6 function 0 not configured
Ricoh product 0x0475 (CardBus bridge) at pci0 dev 19 function 0 not configured
Neomagic product 0x0004 (VGA display, revision 0x01) at pci0 dev 20 function 0
not configured
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
lpt0 at isa0 port 0x378-0x37b irq 7
sb0 at isa0 port 0x220-0x237 irq 5 drq 1: dsp v3.01
midi0 at sb0: <SB MIDI UART>
audio0 at sb0
opl0 at sb0: model OPL3
midi at opl0 not configured
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0-0xff: using exception 16
pc0 at isa0 port 0x60-0x6f irq 1: color
pms0 at pc0 irq 12
pc0: console
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
pcic0 at isa0 port 0x3e0-0x3e1 iomem 0xd0000-0xd3fff irq 9
pcic0: controller 0 (Intel 82365SL Revision 1) has socket A only
pcmcia0 at pcic0 controller 0 socket 0
pcmcia0: CIS version PCMCIA 2.0 or 2.1
pcmcia0: CIS info: 3Com Corporation, 3C589, TP/BNC LAN Card Ver. 2a, 000002
pcmcia0: Manufacturer code 0x101, product 0x589
pcmcia0: function 0: network adapter, ccr addr 10000 mask 3
pcmcia0: function 0, config table entry 1: I/O card; irq mask ffff; iomask 4,
iospace 0-f; rdybsy_active 
wp_active bvd_active io8 io16 irqlevel
pcmcia0: function 0, config table entry 3: I/O card; irq mask ffff; iomask 4,
iospace 0-f; rdybsy_active 
wp_active bvd_active io8 io16 irqlevel
ep0 at pcmcia0 function 0 port 0x330-0x33f: 3Com 3c589 10Mbps Ethernet
ep0: address 00:a0:24:ab:ea:09, 8KB byte-wide FIFO, 5:3 Rx:Tx split
ep0: 10baseT, 10base5, 10base2 (default 10baseT)
apm0 at mainbus0: Power Management spec V1.1
apm0: battery life expectancy: 67%
apm0: A/C state: off
apm0: battery charge state: high
apm0: estimated 2h 33m
biomask 4040 netmask 4040 ttymask 52c2
WARNING: old BSD partition ID!
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
pcmcia0: card irq 10
stray interrupt 10
--------------DB7E9F20CA13315083A9D4C0
Content-Type: text/x-vcard; charset=us-ascii; name="vcard.vcf"
Content-Transfer-Encoding: 7bit
Content-Description: Card for Alicia da Conceicao
Content-Disposition: attachment; filename="vcard.vcf"

begin:          vcard
fn:             Alicia da Conceicao
n:              da Conceicao;Alicia
org:            Cyberstation Inc.
adr:            121 Richmond Street West, Suite 1104;;;Toronto;Ontario;M5H-2G4;Canada
email;internet: alicia@cyberstation.ca
title:          VP of Technology
tel;work:       416-860-9378
tel;fax:        416-860-9380
x-mozilla-cpt:  ;0
x-mozilla-html: TRUE
version:        2.1
end:            vcard



--------------DB7E9F20CA13315083A9D4C0
Content-Type: text/x-vcard; charset=us-ascii; name="vcard.vcf"
Content-Transfer-Encoding: 7bit
Content-Description: Card for Alicia da Conceicao
Content-Disposition: attachment; filename="vcard.vcf"

begin:          vcard
fn:             Alicia da Conceicao
n:              da Conceicao;Alicia
org:            Cyberstation Inc.
adr:            121 Richmond Street West, Suite 1104;;;Toronto;Ontario;M5H-2G4;Canada
email;internet: alicia@cyberstation.ca
title:          VP of Technology
tel;work:       416-860-9378
tel;fax:        416-860-9380
x-mozilla-cpt:  ;0
x-mozilla-html: TRUE
version:        2.1
end:            vcard


--------------DB7E9F20CA13315083A9D4C0--