Well, I replaced the POS Gateway motherboard (too slow) with this thing
that I'm having a hard time identifying (words on the box and the single
sheet of documentation contain the words "Socket 7 Series", TX-PRO, TOP
GUN and M575).  And I also have a Genoa Phantom 3D/DX graphics board.

In the dmesg output below, you'll see four 'not configured' items:
 - an Acer Labs 0x1531 host bridge
 - a S3 0x8a01 VGA display
 - an Acer Labs M5229 IDE controller
 - the audio, which has four "not configured" lines itself

The IDE and graphics seem to work even though it claims they're not
configured.  How can this be?

And, what do I need to do to get everything configured -- especially
the sound?

~Steve

NetBSD 1.3G (GATEWAY) #9: Thu Aug 20 22:34:29 PDT 1998
    root2@gateway:/usr/src/sys/arch/i386/compile/GATEWAY
cpu0: family 5 model 6 step 2
cpu0: AMD K6 (586-class)
real mem  = 66715648
avail mem = 58925056
using 840 buffers containing 3440640 bytes of memory
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o enabled, memory enabled
Acer Labs product 0x1531 (host bridge, revision 0xb3) at pci0 dev 0 function 0 not configured
pcib0 at pci0 dev 2 function 0
pcib0: Acer Labs M1543 PCI-ISA Bridge (rev. 0xb4)
ahc1 at pci0 dev 4 function 0
ahc1: interrupting at irq 9
ahc1: aic7850 Single Channel, SCSI Id=7, 3 SCBs
ahc1: Host Adapter Bios disabled.  Using default SCSI device parameters
scsibus0 at ahc1 channel 0: 8 targets
ahc1: target 1 synchronous at 10.0MHz, offset = 0xf
sd0 at scsibus0 targ 1 lun 0: <SEAGATE, ST32550N, 0012> SCSI2 0/direct fixed
sd0: 2047MB, 3511 cyl, 11 head, 108 sec, 512 bytes/sect x 4194058 sectors
S3 product 0x8a01 (VGA display, revision 0x01) at pci0 dev 5 function 0 not configured
Acer Labs M5229 UDMA IDE Controller (IDE mass storage, interface 0xfa, revision 0x20) at pci0 dev 11 function 0 not configured
isa0 at pcib0
ne0 at isa0 port 0x280-0x29f irq 10
ne0: NE2000 Ethernet
ne0: Ethernet address 00:00:e8:a7:2a:31
ne1 at isa0 port 0x300-0x31f irq 11
ne1: NE2000 Ethernet
ne1: Ethernet address 00:00:e8:a7:2b:3c
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
lpt0 at isa0 port 0x378-0x37b irq 7
wdc0 at isa0 port 0x1f0-0x1f7 irq 14
atapibus0 at wdc0
wd0 at wdc0 drive 0: <ST32122A>
wd0: using 16-sector 16-bit pio transfers, lba mode
wd0 2014MB, 4092 cyl, 16 head, 63 sec, 512 bytes/sect x 4124736 sectors
fe_simple_probe: ff & 70 != 0
ate_match: ate_find failed
fe_simple_probe: ff & 70 != 0
fmv_match: fmv_find failed
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
pc0 at isa0 port 0x60-0x6f irq 1: color
pc0: console
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.2MB, 80 cyl, 2 head, 15 sec
fd1 at fdc0 drive 1: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: read port 0x203
isapnp0: <CMI8330. Audio Adapter, @@@0001, , > port 0x530/8,0x388/8 irq 11 drq 0 not configured
isapnp0: <CMI8330. Audio Adapter, @H@0001, , > port 0x320/2 irq 5 not configured
isapnp0: <CMI8330. Audio Adapter, @P@0001, , > port 0x200/8 not configured
isapnp0: <CMI8330. Audio Adapter, @X@0001, , > port 0x220/16 irq 5 drq 1,5 not configured
biomask 4240 netmask 4e40 ttymask 4ec2
disklabel: BIOS sees chs 3511/11/108 as 998/191/22
WARNING: old BSD partition ID!
disklabel: BIOS sees chs 4092/16/63 as 1023/64/63
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs




-- 
Steve Allen - wormey@eskimo.com   http://www.eskimo.com/~wormey/   ICQ 6709819

Faith is the quality that enables you to eat blackberry jam on a picnic
without looking to see whether the seeds move.

Contrary to popular belief, Unix is user friendly.  
It just happens to be selective about who it makes friends with.
	-Kyle Hearn  <kyle@intex.net>

Next Friday will not be your lucky day.  As a matter of fact, you don't
have a lucky day this year.