Whenever i try to run X 
I get the following server error 


# xinit -allowMouseOpenFail -geometry=80x65+10+10 -fn 8x13 -j -fg 
white -bg navy


XFree86 Version 3.3.1 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: August 4 1997
   If the server is older than 6-12 months, or if your card is newer
   than the above date, look for a newer version before reporting
   problems.  (see http://www.XFree86.Org/FAQ)
Operating System: NetBSD 1.3 The NetBSD Foundation, Inc.
Configured drivers:
  SVGA: server for SVGA graphics adaptors (Patchlevel 0):
      NV1, STG2000, ET4000, ET4000W32, ET4000W32i, ET4000W32i_rev_b,
      ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a, 
ET4000W32p_rev_b,
      ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000, et3000, pvga1, 
wd90c00,
      wd90c10, wd90c30, wd90c24, wd90c31, wd90c33, gvga, ati, 
sis86c201,
      sis86c202, sis86c205, tvga8200lx, tvga8800cs, tvga8900b, 
tvga8900c,
      tvga8900cl, tvga8900d, tvga9000, tvga9000i, tvga9100b, 
tvga9200cxr,
      tgui9320lcd, tgui9400cxi, tgui9420, tgui9420dgi, tgui9430dgi,
      tgui9440agi, tgui96xx, cyber938x, clgd5420, clgd5422, clgd5424,
      clgd5426, clgd5428, clgd5429, clgd5430, clgd5434, clgd5436, 
clgd5446,
      clgd5480, clgd5462, clgd5464, clgd5465, clgd6205, clgd6215, 
clgd6225,
      clgd6235, clgd7541, clgd7542, clgd7543, clgd7548, clgd7555, 
ncr77c22,
      ncr77c22e, cpq_avga, mga2064w, mga1064sg, mga2164w, oti067, 
oti077,
      oti087, oti037c, al2101, ali2228, ali2301, ali2302, ali2308, 
ali2401,
      cl6410, cl6412, cl6420, cl6440, video7, ct65520, ct65525, 
ct65530,
      ct65535, ct65540, ct65545, ct65546, ct65548, ct65550, ct65554,
      ct65555, ct68554, ct64200, ct64300, ark1000vl, ark1000pv, 
ark2000pv,
      ark2000mt, mx, realtek, AP6422, AT24, s3_virge, generic
Using pccons driver with X support
XF86Config: /etc/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: keymap: "xfree86(us)" (overrides other XKB settings)
(**) Mouse: type: Microsoft, device: dev/tty00, baudrate: 1200,
       3 button emulation (timeout: 50ms)
(**) SVGA: Graphics device ID: "Cirrus 5434"
(**) SVGA: Monitor ID: "Compaq 1024"
(--) SVGA: Mode "800x600" needs hsync freq of 35.16 kHz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 35.52 kHz. Deleted.
(--) SVGA: Mode "640x400" needs hsync freq of 37.86 kHz. Deleted.
(--) SVGA: Mode "640x480" needs hsync freq of 36.46 kHz. Deleted.
(--) SVGA: Mode "640x480" needs hsync freq of 37.50 kHz. Deleted.
(--) SVGA: Mode "800x600" needs hsync freq of 37.88 kHz. Deleted.
(--) SVGA: Mode "640x400" needs hsync freq of 43.27 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 43.92 kHz. Deleted.
(--) SVGA: Mode "800x600" needs hsync freq of 48.08 kHz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 48.36 kHz. Deleted.
(--) SVGA: Mode "640x480" needs hsync freq of 53.01 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 53.51 kHz. Deleted.
(--) SVGA: Mode "800x600" needs hsync freq of 55.84 kHz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 56.48 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 51.02 kHz. Deleted.
(--) SVGA: Mode "800x600" needs hsync freq of 64.02 kHz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 62.50 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 62.42 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 64.25 kHz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 70.24 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 70.88 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 74.59 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 75.00 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 76.01 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 80.21 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 89.62 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 105.77 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted.
(--) SVGA: Mode "1800X1440" needs hsync freq of 96.15 kHz. Deleted.
(--) SVGA: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted.
(--) SVGA: Mode "512x384" needs vert refresh rate of 77.97 Hz. 
Deleted.
(--) SVGA: Mode "512x384" needs hsync freq of 34.38 kHz. Deleted.
(--) SVGA: Mode "320x240" needs hsync freq of 39.38 kHz. Deleted.
(--) SVGA: Mode "400x300" needs hsync freq of 35.16 kHz. Deleted.
(--) SVGA: Mode "400x300" needs hsync freq of 37.88 kHz. Deleted.
(--) SVGA: Mode "400x300" needs hsync freq of 48.08 kHz. Deleted.
(--) SVGA: Mode "480x300" needs hsync freq of 35.16 kHz. Deleted.
(--) SVGA: Mode "480x300" needs hsync freq of 37.80 kHz. Deleted.
(--) SVGA: Mode "480x300" needs hsync freq of 39.56 kHz. Deleted.
(--) SVGA: Mode "480x300" needs hsync freq of 48.00 kHz. Deleted.
(**) FontPath set to 
"/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscal
ed,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/
Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi
/,/usr/X11R6/lib/X11/fonts/100dpi/"
(--) SVGA: PCI: Cirrus Logic GD5434 rev 252, Memory @ 0x40000000
(--) SVGA: clgd5434: Specifying a Clocks line makes no sense for this 
driver
(--) SVGA: chipset:  clgd5434
(--) SVGA: videoram: 1024k
(**) SVGA: clocks:  25.23  28.32  41.16  36.08  31.50  39.99  45.08  
49.87
(**) SVGA: clocks:  64.98  72.16  75.00  80.01  85.23  90.00  95.02 
100.23
(**) SVGA: clocks: 108.03 109.77
(**) SVGA: Using 8 bpp, Depth 8, Color weight: 666
(--) SVGA: Maximum allowed dot-clock: 110.636 MHz
(**) SVGA: Mode "640x480": mode clock =  25.175, clock used =  25.226
(--) SVGA: There is no mode definition named "800x600"
(--) SVGA: Removing mode "800x600" from list of valid modes.
(--) SVGA: There is no mode definition named "1024x768"
(--) SVGA: Removing mode "1024x768" from list of valid modes.
(--) SVGA: Virtual resolution set to 640x480
(--) SVGA: SpeedUp code selection modified because virtualX != 1024
(--) SVGA: clgd5434: Internal memory clock register is 0x1c (Standard 
RAS)
(--) SVGA: clgd5434: CL-GD5434 rev. E+, will program 0x22 MCLK
(**) SVGA: clgd5434: Internal memory clock register set to 0x22
(**) SVGA: clgd5434: Approximate DRAM bandwidth for drawing: 96 of 121 
MB/s
(--) SVGA: clgd5434: Using linear framebuffer at 0x40000000 (1024MB)
(--) SVGA: clgd5434: 741376 bytes off-screen memory available
(--) SVGA: clgd5434: Using hardware cursor
(--) SVGA: clgd5434: Using accelerator functions
(--) SVGA: clgd5434: Using BitBLT engine
(**) SVGA: clgd5434: Using memory-mapped I/O
(--) SVGA: Using XAA (XFree86 Acceleration Architecture)
(--) SVGA: XAA: Solid filled rectangles
(--) SVGA: XAA: Screen-to-screen copy
(--) SVGA: XAA: Using 5 128x128 areas for pixmap caching
(--) SVGA: XAA: Caching tiles and non-transparent stipples
(--) SVGA: XAA: Horizontal and vertical lines and segments

Fatal server error:
could not open default font 'fixed'

When reporting a problem related to a server crash, please send
the full server output, not just the last messages

X connection to :0.0 broken (explicit kill or server shutdown).



I've looked through the directories trying to find a 'fixed' file but 
to no avail...

How can i get X to simply run and that's it.....?


Any assistance appreciated