Subject: PCMCIA problems on Sharp Laptop
To: None <current-users@NetBSD.ORG, port-i386@NetBSD.ORG>
From: Johnny Chi-Lung Lam <jlbg+@andrew.cmu.edu>
List: port-i386
Date: 07/30/1998 05:54:12
I was given a Sharp PC-3040 laptop without any hardware documentation,
and I'm trying to get NetBSD installed.  I loaded snaphot-980723 and
compiled a new kernel with the config line:

	pcic* at pci? dev? function ?

The PCI PCMCIA controller doesn't seem to configure correctly.  The
full dmesg is given below.  Can someone help with this problem?

TIA,
--
   Johnny C. Lam
   Department of Statistics                 lamj@stat.cmu.edu
   Carnegie Mellon University               http://www.stat.cmu.edu/~lamj/

                                @>---`---,----

NetBSD 1.3F (SCHROEDINGER) #1: Wed Jul 29 23:17:29 EDT 1998
    root@schroedinger:/usr/src/sys/arch/i386/compile/SCHROEDINGER
cpu0: family 5 model 7 step 0
cpu0: Intel Pentium (P54C) (586-class)
real mem  = 16384000
avail mem = 13017088
using 225 buffers containing 921600 bytes of memory
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o enabled, memory enabled
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82437MX Mobile System Controller (MTSC) (rev. 0x01)
pcib0 at pci0 dev 1 function 0
pcib0: Intel 82371MX Mobile PCI I/O IDE Xcelerator (MPIIX) (rev. 0x02)
pcic0 at pci0 dev 3 function 0: Cirrus Logic GD6729 PCMCIA controller
pcic0: controller 0 (Cirrus PD672X) has sockets A and B
pcic0: controller 1 (Intel 82365SL Revision 1) has sockets A and B
pci_intr_map: no mapping for pin A
pcic0: couldn't map interrupt
Neomagic product 0x0001 (VGA display, revision 0x01) at pci0 dev 6 function 0 not configured
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
lpt0 at isa0 port 0x378-0x37b irq 7
wdc0 at isa0 port 0x1f0-0x1f7 irq 14
atapibus0 at wdc0
wd0 at wdc0 drive 0: <FUJITSU M2714T>
wd0: using 16-sector 16-bit pio transfers, lba mode
wd0: 1037MB, 2125220 sec, 512 bytes/sec
sb0 at isa0 port 0x220-0x237 irq 5 drq 1: dsp v3.01
audio0 at sb0
pcppi0 at isa0 port 0x61
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0-0xff: using exception 16
vt0 at isa0 port 0x60-0x6f irq 1
vt0: generic, 80 col, color, 8 scr, mf2-kbd, [R3.32]
vt0: console
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
apm0 at mainbus0: Power Management spec V1.1
apm0: battery life expectancy: 74%
apm0: A/C state: off
apm0: battery charge state: high
biomask 4040 netmask 4040 ttymask 40c2
WARNING: old BSD partition ID!
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs