Subject: Re: Laptop support...
To: Peter Seebach <seebs@herd.plethora.net>
From: Kurt Schreiner <ks@bambam.ub.uni-mainz.de>
List: port-i386
Date: 10/20/1997 16:11:49
hi,

i've a toshiba tecra 500cs running netbsd with some pcmcia stuff I
found  on ftp.nl.netbsd.org. i patched the current-sources as of
oct. 2 or 3. with this files and the system runs fine...

the output of dmesg(8) follows:

-kurt

NetBSD 1.2G (MINI-PCM) #3: Mon Oct  6 15:11:35 MEST 1997
    ks@mini-ente:/usr/src/sys/arch/i386/compile/MINI-PCM
cpu0: family 5 model 2 step c
cpu0: Intel Pentium (P54C) (586-class)
real mem  = 33288192
avail mem = 29282304
using 431 buffers containing 1765376 bytes of memory
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
Toshiba Info Systems (2nd PCI Vendor ID) product 0x0601 (host bridge, revision 0x11) at pci0 dev 0 function 0 not configured
Toshiba Info Systems (2nd PCI Vendor ID) product 0x0606 (ISA bridge, revision 0x02) at pci0 dev 3 function 0 not configured
Chips and Technologies 65550 (VGA display, revision 0x05) at pci0 dev 4 function 0 not configured
ppb0 at pci0 dev 6 function 0: Toshiba Info Systems (2nd PCI Vendor ID) product 0x0609 (rev. 0x04)
pci1 at ppb0 bus 1
Advanced Micro Devices 53c974 PCscsi-PCI SCSI (SCSI mass storage, revision 0x10) at pci1 dev 1 function 0 not configured
isa0 at mainbus0
ep0 at isa0 port 0x310-0x31f irq 3: 3Com 3C509 Ethernet
ep0: MAC address 00:a0:24:01:24:a7
ep0: 8KB byte-wide FIFO, 5:3 Rx:Tx split, utp/aui/bnc (default utp)
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
lpt0 at isa0 port 0x378-0x37b irq 7
wdc0 at isa0 port 0x1f0-0x1f7 irq 14
atapibus0 at wdc0
wd0 at wdc0 drive 0: <TOSHIBA MK2720FC>
wd0: 1295MB, 2633 cyl, 16 head, 63 sec, 512 bytes/sec
wd0: using 16-sector 16-bit pio transfers, lba addressing
wdc2 at isa0 port 0x190-0x197 irq 10
atapibus1 at wdc2
wd1 at wdc2 drive 0: <TOSHIBA MK1301MAV>
wd1: 1295MB, 2633 cyl, 16 head, 63 sec, 512 bytes/sec
wd1: using 16-sector 16-bit pio transfers, lba addressing
pcicmaster0 at isa0 port 0x3e0-0x3e1
pcic0 at pcicmaster0: Intel 82365sl Rev. 1 slots 0-1 iomem d4000-d4fff irq 11
pcmcia0 at pcic0
pcmcia0: slot 0 contains <3Com Corporation, 3C589, TP/BNC LAN Card Ver. 2a, 000002>
ep1 at pcmcia0 port 0x300-0x30f irq 5 drq2 -126429696: 3Com 3C589 Ethernet
ep1: MAC address 00:60:97:40:b4:b4
ep1: 8KB byte-wide FIFO, 5:3 Rx:Tx split, utp/aui/bnc (default utp)
pcmcia0: slot 1 is empty
pcicmaster1 at isa0 port 0x3e2-0x3e3
pcic2 at pcicmaster1: Intel 82365sl Rev. 1 slots 4-5 iomem d6000-d6fff irq 11
pcmcia1 at pcic2
pcmcia1: slot 0 is empty
pcmcia1: slot 1 is empty
npx0 at isa0 port 0xf0-0xff: using exception 16
vt0 at isa0 port 0x60-0x6f irq 1
vt0: generic, 80 col, color, 8 scr, mf2-kbd, [R3.32]
pms0 at vt0 irq 12
vt0: console
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
biomask 4440 netmask 4468 ttymask 5cea
boot device: <unknown>
root on wd0a dumps on wd0b
root file system type: ffs
lpt0: out of paper

 Aperture driver for XFree86 version