I added some badly needed diskspace to one news-server. The disks seem to 
work, except for an occasional:
sd5(ahc0:6:0): timed out in dataout phase, SCSISIGI == 0x0
sd5(ahc0:6:0): BUS DEVICE RESET message queued.
Bus Device Reset Message Sent
sd5(ahc0:6:0): Bus Device Reset delivered. 2 SCBs aborted
ccd0: error 5 on component 4
ccd0: error 5 on component 4
ahc0: target 6 synchronous at 20.0MHz, offset = 0xf

Is this bad ?

Before I disabled tagged queuing the messages were much more frequent, and 
they only seemed to happen if I were accessing the two-Fujitsus at the 
sametime.

Also df is bit ugly now: (seems to be kernel-ffs_statfs that miscalcuates)
/dev/ccd0d     27741687  3174559 -19769629   -19%    /var/spool/news

Dmesg, follows:

NetBSD 1.2 (NEWS) #9: Fri Feb  7 21:38:27 EET 1997
    root@news:/usr/src/sys/arch/i386/compile/NEWS
CPU: Pentium (GenuineIntel 586-class CPU)
real mem  = 66715648
avail mem = 50675712
using 3240 buffers containing 13271040 bytes of memory
mainbus0 (root)
isa0 at mainbus0
npx0 at isa0 port 0xf0-0xff: using exception 16
pc0 at isa0 port 0x60-0x6f irq 1: color
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
pci0 at mainbus0 bus 0: configuration mode 1
vendor 0x8086 product 0x7030 (class bridge, subclass host, revision 0x02) at 
pci0 dev 0 fun
ction 0 not configured
vendor 0x8086 product 0x7000 (class bridge, subclass ISA, revision 0x01) at 
pci0 dev 7 func
tion 0 not configured
ahc0 at pci0 dev 18 function 0
ahc0: interrupting at irq 12
ahc0: Reading SEEPROM...done.
ahc0: aic7880 Wide Channel, SCSI Id=7, 16 SCBs
ahc0: Reseting Channel A
ahc0: Downloading Sequencer Program...Done
scsibus0 at ahc0
ahc0: target 0 using 16Bit transfers
ahc0: target 0 synchronous at 10.0MHz, offset = 0x8
sd0 at scsibus0 targ 0 lun 0: <CONNER, CFP2105W  2.14GB, 2D4D> SCSI2 0/direct 
fixed
sd0: 2048MB, 3940 cyl, 10 head, 106 sec, 512 bytes/sec
ahc0: target 1 using 16Bit transfers
ahc0: target 1 synchronous at 10.0MHz, offset = 0x8
sd1 at scsibus0 targ 1 lun 0: <CONNER, CFP2107W  2.14GB, 1524> SCSI2 0/direct 
fixed
sd1: 2048MB, 3999 cyl, 10 head, 104 sec, 512 bytes/sec
ahc0: target 2 using 16Bit transfers
ahc0: target 2 synchronous at 10.0MHz, offset = 0x8
sd2 at scsibus0 targ 2 lun 0: <CONNER, CFP2107W  2.14GB, 1524> SCSI2 0/direct 
fixed
sd2: 2048MB, 3999 cyl, 10 head, 104 sec, 512 bytes/sec
ahc0: target 4 using 16Bit transfers
ahc0: target 4 synchronous at 10.0MHz, offset = 0x8
sd3 at scsibus0 targ 4 lun 0: <CONNER, CFP2107W  2.14GB, 1524> SCSI2 0/direct 
fixed
sd3: 2048MB, 3999 cyl, 10 head, 104 sec, 512 bytes/sec
ahc0: target 5 synchronous at 20.0MHz, offset = 0xf
sd4 at scsibus0 targ 5 lun 0: <FUJITSU, M2954S-512, 0142> SCSI2 0/direct fixed
sd4: 4149MB, 5714 cyl, 9 head, 165 sec, 512 bytes/sec
ahc0: target 6 synchronous at 20.0MHz, offset = 0xf
sd5 at scsibus0 targ 6 lun 0: <FUJITSU, M2954S-512, 0122> SCSI2 0/direct fixed
sd5: 4149MB, 5714 cyl, 9 head, 165 sec, 512 bytes/sec
de0 at pci0 dev 19 function 0: DC21040 [10Mb/s] pass 2.3
de0: Ethernet address 00:80:c8:0c:10:11
de0: enabling 10baseT/UTP port
de0: interrupting at irq 10
de1 at pci0 dev 20 function 0: DC21040 [10Mb/s] pass 2.3
de1: Ethernet address 00:80:c8:0c:12:3a
de1: enabling 10baseT/UTP port
de1: interrupting at irq 11
biomask 1040 netmask 1c40 ttymask 1c42
sd5(ahc0:6:0): timed out in dataout phase, SCSISIGI == 0x0
sd5(ahc0:6:0): BUS DEVICE RESET message queued.
Bus Device Reset Message Sent
sd5(ahc0:6:0): Bus Device Reset delivered. 2 SCBs aborted
ccd0: error 5 on component 4
ccd0: error 5 on component 4
ahc0: target 6 synchronous at 20.0MHz, offset = 0xf
sd5(ahc0:6:0): timed out in dataout phase, SCSISIGI == 0x0
sd5(ahc0:6:0): BUS DEVICE RESET message queued.
Bus Device Reset Message Sent
sd5(ahc0:6:0): Bus Device Reset delivered. 2 SCBs aborted
ccd0: error 5 on component 4
ccd0: error 5 on component 4
ahc0: target 6 synchronous at 20.0MHz, offset = 0xf


-- 
 Jarkko.Torppa@cute.fi     +358-9-34871220         Cute Communications Oy