Hello there

I am having a problem setting up a second parallel printer - /dev/lpt1
is recognized at boot, but "not configured" when I try to access it. 
The same printer/cable combo works on /dev/lpt0.

What am I overlooking??

Many thanks and congrats to those producing 1.2, another great release.

Rex

test ---------------------
johnson# date > /dev/lpt1
/dev/lpt1: Device not configured.

conf ---------------------

lpt0    at isa? port 0x378 irq 7        # standard PC parallel ports
lpt1    at isa? port 0x278
#lpt2   at isa? port 0x3bc      


Boot ---------------------

/netbsd: NetBSD 1.2 (johnson) #2: Wed Oct  2 04:02:55 PDT 1996
/netbsd:     root@johnson.net.au:/usr/src/sys/arch/i386/compile/johnson
/netbsd: CPU: Pentium (GenuineIntel 586-class CPU)
/netbsd: real mem  = 33161216
/netbsd: avail mem = 29175808
/netbsd: using 430 buffers containing 1761280 bytes of memory
/netbsd: mainbus0 (root)
/netbsd: isa0 at mainbus0
/netbsd: com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
/netbsd: com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
/netbsd: lpt0 at isa0 port 0x378-0x37f irq 7
/netbsd: lpt1 at isa0 port 0x278-0x27f: polled
/netbsd: npx0 at isa0 port 0xf0-0xff: using exception 16
/netbsd: pc0 at isa0 port 0x60-0x6f irq 1: color
/netbsd: pms0 at pc0 irq 12
/netbsd: fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
/netbsd: fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
/netbsd: pci0 at mainbus0 bus 0: configuration mode 1
/netbsd: vendor 0x8086 product 0x7030 (class bridge, subclass host, revision 0x01) at pci0 dev 0 function 0 not configured
/netbsd: vendor 0x8086 product 0x7000 (class bridge, subclass ISA, revision 0x01) at pci0 dev 7 function 0 not configured
/netbsd: ahc0 at pci0 dev 10 function 0
/netbsd: ahc0: interrupting at irq 11
/netbsd: ahc0: Reading SEEPROM...done.
/netbsd: ahc0: aic7880 Single Channel, SCSI Id=7, 16 SCBs
/netbsd: ahc0: Reseting Channel A
/netbsd: ahc0: Downloading Sequencer Program...Done
/netbsd: scsibus0 at ahc0
/netbsd: ahc0: target 0 synchronous at 10.0MHz, offset = 0xf
/netbsd: sd0 at scsibus0 targ 0 lun 0: <FUJITSU, M2952S-512, 0122> SCSI2 0/direct fixed
/netbsd: sd0: 2291MB, 5714 cyl, 5 head, 164 sec, 512 bytes/sec
/netbsd: ahc0: target 1 synchronous at 5.0MHz, offset = 0xf
/netbsd: cd0 at scsibus0 targ 1 lun 0: <MATSHITA, CD-ROM CR-504-J, SS17> SCSI2 5/cdrom removable
/netbsd: ahc0: target 2 synchronous at 4.4MHz, offset = 0xe
/netbsd: st0 at scsibus0 targ 2 lun 0: <WANGTEK, 51000  SCSI, B26C> SCSI2 1/sequential removable
/netbsd: st0: drive empty
/netbsd: vendor 0x5333 product 0x8811 (class display, subclass VGA, revision 0x54) at pci0 dev 11 function 0 not configured
/netbsd: biomask 840 netmask 840 ttymask 18da



------------------------------------------------------------
Rex McMaster                       rmcm@ariel.unimelb.edu.au