Subject: Re: Intel Endeavor board support
To: Jonathan Stone <firstname.lastname@example.org>
From: Herb Peyerl <email@example.com>
Date: 09/23/1996 16:25:22
Jonathan Stone <jonathan@DSG.Stanford.EDU> wrote:
> I'm using the driver on 3c595s at 100Mbits; it seems very healthy
> and stable. There could be better support for the 100mbit PHY
> interfaces (e.g., redefining link0 through link1 to select 10mbit,
> 100Mbit, or autosense), and DMA bus-mastering; otherwise the driver
> seems fine.
> Credit for that goes to Herb Peyerl <firstname.lastname@example.org>.
Minor correction: I've not had my paws in if_ep* for quite some time
now. IIRC, the 3c59x support was done by Christos but I could be wrong.
Though I have used the 3c590 support and it works rather well.