Heyyo,

I have been experiencing problems with my PC panicing and rebooting in
the middle of the night, typically when accounting is run at 2:00.

Also, I might add that the AHA2742 is still glued to the ISA bus, which
is conceptually incorrect.

The 'stray interrupt 15' mentioned in the dmesg is most likely from the
Intel Etherexpress EISA card that is installed (with no drivers, still
waiting).

Can anyone shed some light as to the problem and fix wrt the panic?

Here's the scoop:

NetBSD 1.1B (GRIND) #11: Fri May  3 14:18:58 PDT 1996
    windsor@grind:/usr/src/sys/arch/i386/compile/GRIND
CPU: i486DX (GenuineIntel 486-class CPU)
real mem  = 33161216
avail mem = 29556736
using 430 buffers containing 1761280 bytes of memory
mainbus0 (root)
isa0 at mainbus0
ep0 at isa0 port 0x300-0x30f irq 10: 3Com 3C509 Ethernet
ep0: aui/utp address 00:20:af:9d:df:d4
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
lpt0 at isa0 port 0x378-0x37f irq 7
ahe0: 274x Single Channel, SCSI Id=7, aic7770 >= Rev E, 4 SCBs
ahe0: Using Level Sensitive Interrupts
ahe0: Downloading Sequencer Program...Done
ahe0 at isa0 port 0x3000-0x30ff irq 11ahe0: Probing channel A
scsibus0 at ahe0
ahe0: SDTR, target 1 period 100 offset 25
ahe0: target 1 synchronous at 10.0MB/s, offset = 25
sd0 at scsibus0 targ 1 lun 0: <MAXTOR, MXT-540SL, I1.2> SCSI2 0/direct fixed
sd0: 521MB, 2234 cyl, 7 head, 68 sec, 512 bytes/sec
ahe0: SDTR, target 2 period 100 offset 25
ahe0: target 2 synchronous at 10.0MB/s, offset = 25
sd1 at scsibus0 targ 2 lun 0: <CONNER, CFP2107S  2.14GB, 1420> SCSI2 0/direct fixed
sd1: 2048MB, 3999 cyl, 10 head, 104 sec, 512 bytes/sec
ahe0: SDTR, target 3 period 100 offset 25
ahe0: target 3 synchronous at 10.0MB/s, offset = 25
sd2 at scsibus0 targ 3 lun 0: <DEC, RZ24L    (C) DEC, 476B> SCSI2 0/direct fixed
sd2: 234MB, 1818 cyl, 4 head, 65 sec, 512 bytes/sec
cd0 at scsibus0 targ 6 lun 0: <SONY, CD-ROM CDU-541, 4.5d> SCSI2 5/cdrom removable
gus0 at isa0 port 0x220-0x22f irq 5 drq 1
 <Gravis UltraSound version 3.0, 256KB DRAM, full-duplex, record drq 6>
npx0 at isa0 port 0xf0-0xff: using exception 16
pcprobe: reset error 1
pc0 at isa0 port 0x60-0x6f irq 1: mono
pc: timeout updating leds
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
eisa0 at mainbus0
device ADP7771 at eisa0 slot 3 not configured
device INT1010 at eisa0 slot 5 not configured
biomask 860 netmask c60 ttymask cfa
stray interrupt 15
panic: ptdi 1a86063
syncing disks... 2 2 done

-- Rob
----------------------------------------
Internet: windsor@pobox.com      Life: Rob@Sunnyvale.California.USA.Earth
"Da Web": http://pobox.com/~windsor/

"Ain't much distance 'tween a pat on the back and a kick in the pants."
    -- David Lee Roth (1990), `The Dogtown Shuffle'