Subject: Re: SCSI woes (was Re: 2nd SCSI adapter, what to get? )
To: None <port-i386@NetBSD.ORG>
From: Volker A. Brandt <volker@carlotta.iam.uni-bonn.de>
List: port-i386
Date: 11/13/1995 11:22:15
In article <199511122103.IAA28485@anarres> Daniel Carosone <dan@anarres.mame.mu.oz.au> writes:
>
>> [Simon has confusing problems reassembling zen]
>
>I have seen before, at least a couple of times, situations where
>things would work with the lid off, but not with it on. In one case,
>it turned out to be an ungrounded BNC ethernet. The other, I really
>don't know.

I just had an annoying experience involving a Fujitsu M2934SA SCSI2
4.1GB disk drive.  There's a label that warns you not to connect the
drive housing to ground.  Apparently, if you use the middle screw
holes, it is easy to produce a ground connection.  The drive then
plays dead.

Of course I tested everything with the lid off and no screws.  After
reassembly, nothing worked. Brought me a few months closer to my first
stomach ulcer...


Good luck -- Volker

-- 
----------------------------------------------------------------------------
Chirac -- Le fossoyeur de la Grande Nation 		Volker A. Brandt
Internet: volker@iam.uni-bonn.de			Angewandte Mathematik
Phone/FAX number available upon request			(Bonn, Germany)