Subject: SCSI disk support
To: None <port-i386@NetBSD.ORG>
From: Brad Kidwell <bk35+@andrew.cmu.edu>
List: port-i386
Date: 07/17/1995 16:11:38
I have a SCSI controller on a netbsd machine on which I would like to
connect an external device configured as a SCSI drive.

When I connect the device to the SCSI connection and turn it on, the
following message appears on the console:

ncr0: restart (scsi reset).
sd0(ncr0:0:0): COMMAND FAILED (6 ff) @f86fc000.
sd0(ncr0:0:0): COMMAND FAILED (6 ff) @f86fc200.
sd0(ncr0:0:0): COMMAND FAILED (6 ff) @f86fc400.
sd0(ncr0:0:0): COMMAND FAILED (6 ff) @f86fc600.
sd0(ncr0:0:0): FAST SCSI-2 100ns (10 Mb/sec) offset 8

According to the manufacturer, the device is permanently set with SCSI
id #4, and for an HP workstation is created using:

mknod /dev/rdsk/4s0 c 47 0x201400

The diskinfo command on HP returns a size of 409600 Kbytes, 512
bytes/sector, and 819201 blocks per disk.

My question, which major/minor number would I use to create this device
on a netbsd machine?

Thanks in advance.


//////////////////////////////////////////////////////////////
/Brad Kidwell                            bk35+@andrew.cmu.edu/
/Information Networking Institute                            /
/Carnegie Mellon University  Office: (412) 268-8128, 268-3029/   
/							     /
/"God help us we're in the hands of engineers."		     /
/          -Jeff Goldblum as Dr. Ian Malcolm in Jurassic Park/
//////////////////////////////////////////////////////////////