Subject: PCI woes [help]
To: None <port-i386@NetBSD.ORG>
From: David Hobley <David.Hobley@nms.otc.com.au>
List: port-i386
Date: 06/05/1995 11:27:13
[Sorry if you got a similar message before - I got no responses and I am
not certain it got out :-)]

Can anyone tell me how to configure my system to recognise my NCR SCSI
controller ? A pointer to documentation would be great.

I have a SCSI disk working under DOS, but when I boot NetBSD using the
GENERIC kernel, or one I have configured myself, I get errors/warnings
about being unable to map pin A as well as some not configured warnings
and it doesn't produce information about the SCSI disk I have connected,

I have included the output from dmesg below.

Is there some reason I get the eisa configuration message below ?
I don't particularly want eisa configured AFAIK. I haven't mentioned it in
the config file.

NetBSD 1.0A (ISHTAR) #0: Sat Jun  3 10:49:52 EST 1995
    davidh@ishtar:/usr/src/sys/arch/i386/compile/ISHTAR
CPU: Pentium (GenuineIntel 586-class CPU)
real mem  = 16384000
avail mem = 14082048
using 225 buffers containing 921600 bytes of memory
isa0 (root)
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
lpt0 at isa0 port 0x378-0x37f: polled
wdc0 at isa0 port 0x1f0-0x1f7 irq 14
wd0 at wdc0 drive 0: 514MB, 1046 cyl, 16 head, 63 sec, 512 bytes/sec <Maxtor 7540 AV>
wd0: using 8-sector 16-bit pio transfers, lba addressing
ed0 at isa0 port 0x300-0x31f irq 11: address 00:40:33:25:06:51, type NE2000 (16-bit)
sb0 at isa0 port 0x220-0x237 irq 7 drq 1: dsp v4.11
npx0 at isa0 port 0xf0-0xff: using exception 16
vt0 at isa0 port 0x60-0x6f irq 1: s3 801/805, 80 col, color, 8 scr, mf2-kbd, [R3.00]
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
root device eisa not configured
pci0 (root): configuration mode 1
pci0 bus 0 device 16: identifier c8221045 class 06000001 not configured
ncr0 at pci0 bus 0 device 17
pci_map_mem: memory mapped at c0000000-c0000fff
pci_map_int: no mapping for pin A
pci0 bus 0 device 18: identifier d001100b class 01010000 not configured
biomask 40c0 netmask 800 ttymask 1a

Cheers,
david