------=_Part_6810_27073838.1141485040782
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable
Content-Disposition: inline

I have Jornada 680 and linksys ethernet pc card pcmpc100 ver. 3. It
didn't work. Here's the error message:

ne0 at pcmcia0 function 0: <Linksys, EtherFast 10/100 PC Card
(PCMPC100 V3), V2.0,  >
ne0: where did the card go?

Do you know what's the problem? The attachment is my full dmesg.

Thanks a lot!

------=_Part_6810_27073838.1141485040782
Content-Type: text/plain; name=dmesg; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment; filename="dmesg"

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 3.0 (GENERIC) #0: Fri Feb 24 20:55:11 EET 2006
	XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
HP Jornada 680 (US/UK)
total memory = 16384 KB
avail memory = 14136 KB
mainbus0 (root)
cpu0 at mainbus0: HITACHI SH3 132.694MHz PCLOCK 22.102 MHz
16KB/16B 4-way set-associative I/D-unified cache. 
P0, U0, P3 write-back P1 write-back
4-way set-associative 128 TLB entries
VPN mode, multiple virtual storage mode
btnmgr0 at mainbus0
wskbd2 at btnmgr0 mux 1
shb0 at mainbus0
scif0 at shb0
adc0 at shb0
j6x0pwr0 at adc0
j6x0tp0 at adc0
wsmouse0 at j6x0tp0 mux 0
wskbd1 at j6x0tp0 mux 1
j6x0lcd0 at shb0: brightness 28, contrast 11
hd64461if0 at shb0
hd64461video0 at hd64461if0: frame buffer = 512 KB , console
hpcfb0 at hd64461video0: 640x240 pixels, 65536 colors, 80x24 chars
wsdisplay0 at hpcfb0 kbdmux 1: console (std, vt100 emulation)
wsmux1: connecting to wsdisplay0
wskbd2: connecting to wsdisplay0
wskbd1: connecting to wsdisplay0
hpcfb: 640x240 pixels, 65536 colors, 80x24 chars
hpcfb: 640x240 pixels, 65536 colors, 80x24 chars
hpcfb: 640x240 pixels, 65536 colors, 80x24 chars
wsdisplay0: screen 1-3 added (std, vt100 emulation)
hd64461pcmcia0 at hd64461if0
pcmcia0 at hd64461pcmcia0
ne0 at pcmcia0 function 0: <Linksys, EtherFast 10/100 PC Card (PCMPC100 V3), V2.0,  >
ne0: where did the card go?
pcmcia1 at hd64461pcmcia0
wdc0 at pcmcia1 function 0: <SanDisk, SDP, 5/3 0.6>
wdc0: memory mapped mode
atabus0 at wdc0 channel 0
hd64461gpio at hd64461if0 not configured
hd64461afe at hd64461if0 not configured
com0 at hd64461if0: device problem. don't attach.
hd64461fir at hd64461if0 not configured
pfckbd0 at mainbus0
hpckbd0 at pfckbd0
wskbd0 at hpckbd0: console keyboard, using wsdisplay0
hpcapm0 at mainbus0: pseudo power management module
apmdev0 at hpcapm0: Power Management spec V1.2
wd0 at atabus0 drive 0: <SanDisk SDCFB-1024>
wd0: drive supports 1-sector PIO transfers, LBA addressing
wd0: 977 MB, 1986 cyl, 16 head, 63 sec, 512 bytes/sect x 2001888 sectors
wd0: drive supports PIO mode 4
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
WARNING: preposterous clock chip time
 -- CHECK AND RESET THE DATE!
/dev/wd0f: file system not clean (fs_clean=4); please fsck(8)
/dev/wd0f: lost blocks 0 files 0


------=_Part_6810_27073838.1141485040782--