On Sun, Jan 25, 2004 at 12:35:53 +0000, Tom F wrote:

> # disklabel -i -I wd0
> partition> P
> 16 partitions:
> #        size  offset fstype [fsize bsize cpg/sgs]
>  a:    990704   10240 4.2BSD       0    0     0  # (Cyl.  10*- 992)
>  d:   1000944       0 unused       0    0        # (Cyl.   0 - 992)
>  e:     10177      63  MSDOS                     # (Cyl.   0*- 10*)

You need 'c' partition as well.  'd' is the whole disk, 'c' is the
whole NetBSD MBR partition (so == 'a').  Also, what does fdisk say
about the CF?

For reference, here's how my CF look like.

wd0 at atabus0 drive 0: <Hitachi ATA 6.0>
wd0: drive supports 1-sector PIO transfers, LBA addressing
wd0: 122 MB, 978 cyl, 8 head, 32 sec, 512 bytes/sect x 250368 sectors

<root@nada:~> (1083) fdisk wd0
Disk: /dev/rwd0c
NetBSD disklabel disk geometry:
cylinders: 978, heads: 8, sectors/track: 32 (256 sectors/cylinder)
total sectors: 250368

BIOS disk geometry:
cylinders: 978, heads: 8, sectors/track: 32 (256 sectors/cylinder)
total sectors: 250368

Partition table:
0: Primary DOS with 12 bit FAT (sysid 1)
    start 32, size 32736 (16 MB, Cyls 0-128), Active
1: NetBSD (sysid 169)
    start 32768, size 217600 (106 MB, Cyls 128-978)
2: <UNUSED>
3: <UNUSED>


<root@nada:~> (1084) disklabel wd0
# /dev/rwd0c:
type: ESDI
disk: Hitachi ATA  6.0
label: fictitious
flags:
bytes/sector: 512
sectors/track: 32
tracks/cylinder: 8
sectors/cylinder: 256
cylinders: 978
total sectors: 250368
rpm: 3600
interleave: 1
trackskew: 0
cylinderskew: 0
headswitch: 0           # microseconds
track-to-track seek: 0  # microseconds
drivedata: 0 

8 partitions:
#        size    offset     fstype [fsize bsize cpg/sgs]
 a:    217600     32768     4.2BSD   1024  8192   286  # (Cyl.    128 -    977)
 c:    217600     32768     unused      0     0        # (Cyl.    128 -    977)
 d:    250368         0     unused      0     0        # (Cyl.      0 -    977)
 e:     32736        32      MSDOS                     # (Cyl.      0*-    127)
 f:    217600     32768     unused      0     0        # (Cyl.    128 -    977)


> Also, I've made some hardware modifications to my machine (moving the CF
> slot, speaker etc around, mostly to avoid having the tray sticking out
> when a pcmcia card is inserted, which irritated me.) My machine now has a
> flat underside; I'll put details on a webpage, if you're interested.

Sounds cute...

SY, Uwe
-- 
uwe@ptc.spbu.ru                         |       Zu Grunde kommen
http://www.ptc.spbu.ru/~uwe/            |       Ist zu Grunde gehen