Hello all. Figured I'd share my exploits so others don't have to do so
much experimentation.

I bought a very cheapie USB wired ethernet adapter from Ebay for about
$12 including shipping, but (big surprise), it was broken when I
received it. You get what you pay for I guess. It was based on aue. I
told the seller that it's broke and he's sending another one. We'll
see how it goes.

In the meantime I broke down and bought a Linksys usb200m. I've always
wanted a good USB adapter in my toolkit. I'm not sure if this is the
best one, but I know for sure that it's supported with axe in
-current.

I have a Linksys WUSB54G wireless USB 802.11g card. Apparently atu
from current is supposed to work with it, but I haven't been able to
make it work.

Also bought a 1 gig Lexar CF card which seems to be doing the job
nicely. But those 4 gig microdrives are coming down in price.... (stay
away from the Seagate 5 gig until they come out for retail).

Other notable stuff:

Linksys WPC11 v3 PCMCIA 802.11b adapter (v4 won't work, it's cardbus)
Turtle Beach USB audio card (works great with madplay)
Lexar 256 meg jump drive (used to be my root disk)

I forgot to comment out the built in audio adapter in this kernel.
Since I don't think anyone has got it to work (not that you'd want to,
it's mono), I figure it's not worth having.

Here's my current dmesg:

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 2.99.16 (GOSSAMER6-current) #0: Sun Mar  6 23:36:13 MST 2005
 root@speedy.andy.com:/usr/obj-hpcmips-current/sys/arch/hpcmips/compile/GOSSAMER6-current
NEC MobilePro 880 (NEC VR4121 rev1.2 168.521MHz)
total memory = 32768 KB
avail memory = 26756 KB
mainbus0 (root)
cpu0 at mainbus0: NEC VR4100 CPU (0xc60) Rev. 6.0 with software
emulated floating point
cpu0: 16KB/16B direct-mapped L1 Instruction cache, 32 TLB entries
cpu0: 8KB/16B direct-mapped write-back L1 Data cache
vr4102ip0 at mainbus0
vrbcu0 at vr4102ip0 addr 0x0b000000-001f
vrbcu0: CPU 168.521MHz, bus 28.086MHz, ram 56.173MHz
vrcmu0 at vr4102ip0 addr 0x0b000060-007f
vrgiu0 at vr4102ip0 addr 0x0b000100-011f
hpcioman9 at vrgiu0
hpcin0 at hpcioman9 iochip vrgiu0, port 13, type 5, id 256, interrupt level low
button1 at vrgiu0 port=3 id=13 active=high sense=edge
pwctl0 at vrgiu0 port=46 id=0 on=1
vrdmaau0 at vr4102ip0 addr 0x0b000020-0037
vrdcu0 at vr4102ip0 addr 0x0b000040-004b
vrrtc0 at vr4102ip0 addr 0x0b0000c0-00df
vrkiu0 at vr4102ip0 addr 0x0b000180-019f
hpckbd0 at vrkiu0
wskbd0 at hpckbd0: console keyboard
vrpmu0 at vr4102ip0 addr 0x0b0000a0-00bf
vrdsu0 at vr4102ip0 addr 0x0b0000e0-00e7
vrled0 at vr4102ip0 addr 0x0b000240-024f
vrpiu0 at vr4102ip0 addr 0x0b000120-013f, 0x0b0002a0-02bf
wsmouse0 at vrpiu0 mux 0
mqvideo0 at vr4102ip0 addr 0x0a000000-7fffff: MQ200 Rev.00 video
controller, console
mqvideo0: framebuffer address: 0xaa0ea600
  PLL1: 49.989MHz(0x0eb22a2a, 12.288MHzx179/ 44)
  PLL2: disable
  PLL3: 34.368MHz(0x00b20730, 12.288MHzx179/ 64)
   MEM: 49.989MHz(PLL1)
    GE: 34.368MHz(PLL3)
   GC1: disable
   GC2: 34.368MHz(PLL3/1/1), FP
hpcfb0 at mqvideo0: 800x600 pixels, 65536 colors, 100x60 chars
wsdisplay0 at hpcfb0 kbdmux 1: console (std, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
vrc4172pci0 at vr4102ip0 addr 0x0aff0cf8-0cff
pci0 at vrc4172pci0 bus 0
pci0: i/o space, memory space enabled, rd/line ok
NEC product 0x0000 (host bridge, revision 0x03) at pci0 dev 0 function
0 not configured
ohci0 at pci0 dev 0 function 1: NEC product 0x0000 (rev. 0x00)
ohci0: interrupting at pciintr 0:0:1
ohci0: OHCI version 1.0
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
vrc4172pwm0 at vr4102ip0 addr 0x15003880-3885
vraiu0 at vr4102ip0 addr 0x0b000160-017f
audio0 at vraiu0: half duplex
vrisab0 at vrgiu0: ISA port 0x14000000-0x18000000 mem 0x10000000-0x14000000
isa0 at vrisab0
pcic0 at isa0 port 0x3e0-0x3e1 iomem 0x70000-0x73fff irq 589827
pcic0: controller 0 (Ricoh RF5C396) has sockets A and B
pcmcia0 at pcic0 controller 0 socket 0
pcmcia1 at pcic0 controller 0 socket 1
btnmgr0 at mainbus0
wskbd1 at btnmgr0 mux 1
wskbd1: connecting to wsdisplay0
hpcapm0 at mainbus0: pseudo power management module
apmdev0 at hpcapm0: Power Management spec V1.2
pcic0: using irq 589827 for socket events
wdc1 at pcmcia0 function 0: < LEXAR ATA FLASH CARD    ,  STORM , TTE01>
pcic0: port 0x14000400-0x1400040f
wdc1: i/o mapped mode
pcmcia0: card irq 3
atabus0 at wdc1 channel 0
hpcapm: battery life 50%
wi0 at pcmcia1 function 0: <The Linksys Group, Inc., Instant Wireless
Network PC Card, ISL37300P, RevA>
pcic0: port 0x14000440-0x1400047f
pcmcia1: card irq 3
wi0: 802.11 address xx:xx:xx:xx:xx:xx
wi0: using RF:PRISM3 MAC:ISL3871(PCMCIA)
wi0: Intersil Firmware: Primary (1.1.0), Station (1.4.2)
wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
uhub1 at uhub0 port 1
uhub1: vendor 0x05e3 USB Hub, class 9/0, rev 1.01/0.12, addr 2
uhub1: 4 ports with 4 removable, self powered
axe0 at uhub1 port 1 configuration 1 interface 0
axe0: vendor 0x077b product 0x2226, rev 2.00/0.01, addr 3
axe0: Ethernet address xx:xx:xx:xx:xx:xx
ukphy0 at axe0 phy 3: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000004, model 0x0020, rev. 1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
umass0 at uhub1 port 2 configuration 1 interface 0
umass0: LEXAR MEDIA JUMPDRIVE, rev 2.00/30.00, addr 4
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <LEXAR, JUMPDRIVE, 1000> disk removable
sd0: 247 MB, 984 cyl, 16 head, 63 sec, 512 bytes/sect x 506880 sectors
uaudio0 at uhub1 port 4 configuration 1 interface 0: C-Media INC. USB
Audio, rev 1.10/0.10, addr 5
uaudio0: audio rev 1.00
audio1 at uaudio0: full duplex, independent
wd0 at atabus0 drive 0: <LEXAR ATA FLASH>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 983 MB, 1999 cyl, 16 head, 63 sec, 512 bytes/sect x 2014992 sectors
wd0: drive supports PIO mode 4
boot device: wd0
root on wd0a dumps on wd0b
pcmcia0: card irq 3
pcmcia0: card irq 3
root file system type: ffs
pcmcia1: card irq 3