TAKEMURA Shin wrote...
> Please try the kernel if you have Mobile Pro 800 and USB mouse in
> two ways:
> 
>   1) plug in USB mouse to your MP800 and boot the kernel

Works

>   2) plug off USB mouse from your MP800, boot the kernel and
>      plug in the mouse

Works.

Attach/detach works under X as well.

Excellent work :)

dmesg below.

--
josh
	I don't tan, I don't burn, I implode.

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.5ZC (GENERIC) #1: Fri May  3 20:59:35 JST 2002
    takemura@keiko:/work/takemura/build/destdir.hpcmips/home/takemura/cvs/tnf/src/sys/arch/hpcmips/compile/GENERIC
NEC MobilePro 800 (NEC VR4121 rev0.0 131.072MHz)
total memory = 32768 KB
avail memory = 27008 KB
using 435 buffers containing 1740 KB of memory
mainbus0 (root)
cpu0 at mainbus0: NEC VR4100 CPU (0xc60) Rev. 6.0 with software emulated floating point
cpu0: 16KB/16B direct-mapped L1 Instruction cache, 32 TLB entries
cpu0: 8KB/16B direct-mapped write-back L1 Data cache
vr4102ip0 at mainbus0
vrbcu0 at vr4102ip0 addr 0x0b000000-001f
vrbcu0: cpu 131.072MHz, bus 32.768MHz, ram 65.536MHz
vrcmu0 at vr4102ip0 addr 0x0b000060-007f
vrgiu0 at vr4102ip0 addr 0x0b000100-011f
hpcioman9 at vrgiu0
hpcin0 at hpcioman9 iochip vrgiu0, port 13, type 5, id 256, interrupt level low
button1 at vrgiu0 port=3 id=13 active=high sense=edge
pwctl0 at vrgiu0 port=46 id=0 on=1
vrdmaau0 at vr4102ip0 addr 0x0b000020-0037
vrdcu0 at vr4102ip0 addr 0x0b000040-004b
vrrtc0 at vr4102ip0 addr 0x0b0000c0-00df
vrkiu0 at vr4102ip0 addr 0x0b000180-019f
hpckbd0 at vrkiu0
wskbd0 at hpckbd0: console keyboard
vrpmu0 at vr4102ip0 addr 0x0b0000a0-00bf
vrpmu: Deadman's switch detected
vrdsu0 at vr4102ip0 addr 0x0b0000e0-00e7
vrled0 at vr4102ip0 addr 0x0b000240-024f
vrpiu0 at vr4102ip0 addr 0x0b000120-013f, 0x0b0002a0-02bf
wsmouse0 at vrpiu0 mux 0
vrc4172pci0 at vr4102ip0 addr 0x0aff0cf8-0cff
pci0 at vrc4172pci0 bus 0
pci0: i/o space, memory space enabled, rd/line ok
NEC product 0x0000 (miscellaneous prehistoric, interface 0x06) at pci0 dev 0 function 0 not configured
ohci0 at pci0 dev 0 function 1: NEC product 0x0000 (rev. 0x00)
ohci0: interrupting at pciintr 0:0:1
ohci0: OHCI version 1.0
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
vraiu0 at vr4102ip0 addr 0x0b000160-017f
audio0 at vraiu0: half duplex
vrisab0 at vrgiu0: ISA port 0x14000000-0x18000000 mem 0x10000000-0x14000000
isa0 at vrisab0
pcic0 at isa0 port 0x3e0-0x3e1 iomem 0x70000-0x73fff irq 589827
pcic0: controller 0 (Intel 82365SL Revision 1) has sockets A and B
pcic0: controller 1 (Intel 82365SL Revision 1) has socket A only
pcmcia0 at pcic0 controller 0 socket 0
pcmcia1 at pcic0 controller 0 socket 1
pcmcia at pcic0 controller 1 socket 0 not configured
bivideo0 at mainbus0: pseudo video controller, console
bivideo0: framebuffer address: 0xaa000000
hpcfb0 at bivideo0: 800x600 pixels, 65536 colors, 100x60 chars
wsdisplay0 at hpcfb0 kbdmux 1: console (std, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
btnmgr0 at mainbus0
wskbd1 at btnmgr0 mux 1
wskbd1: connecting to wsdisplay0
hpcapm0 at mainbus0: pseudo power management module
apmdev0 at hpcapm0: Power Management spec V1.2
pcic0: using irq 589827 for socket events
wdc1 at pcmcia0 function 0uhidev0 at uhub0 port 1 configuration 1 interface 0
uhidev0: Primax Elec. USB Wheel Mouse, rev 1.00/1.00, addr 2, iclass 3/1
ums0 at uhidev0: 3 buttons
wsmouse1 at ums0 mux 0
 port 0x14000300-0x1400030f
wd0 at wdc1 channel 0 drive 0: <PQI ATA Rev6.0>
wd0: drive supports 1-sector PIO transfers, LBA addressing
wd0: 250 MB, 1000 cyl, 16 head, 32 sec, 512 bytes/sect x 512000 sectors
wi0 at pcmcia1 function 0: Lucent Technologies, WaveLAN/IEEE, Version 01.01
wi0: port 0x14000340-0x1400037fpcmcia1: card irq 3
 802.11 address 00:02:2d:00:b7:00
wi0: using Lucent Technologies, WaveLAN/IEEE
wi0: Lucent Firmware: Station (7.52.1)
boot device: wd0
root on wd0a dumps on wd0b
pcmcia0: card irq 3
pcmcia0: card irq 3
pcmcia0: card irq 3
pcmcia0: card irq 3
WARNING: preposterous clock chip time
 -- CHECK AND RESET THE DATE!
root file system type: ffs
pcmcia1: card irq 3
hpcfb: 800x600 pixels, 65536 colors, 100x60 chars
wsdisplay0: screen 1 added (std, vt100 emulation)
hpcfb: 800x600 pixels, 65536 colors, 100x60 chars
wsdisplay0: screen 2 added (std, vt100 emulation)
hpcfb: 800x600 pixels, 65536 colors, 100x60 chars
wsdisplay0: screen 3 added (std, vt100 emulation)
hpcfb: 800x600 pixels, 65536 colors, 100x60 chars
wsdisplay0: screen 4 added (std, vt100 emulation)
hpcapm: battery life 80%
hpcapm: battery state high