Roy Wilson <rwwst6+@pitt.edu> writes:
> or a compact flash card. I notice that VR4102 NetBSD work is (if I recall
> correctly) in the experimental stage. 

There is no known problem specific to VR4102. My MC-CS12 just works fine
with current kernel (see below).

Takao Shinohara

===== console log of Mobile Gear MC-CS12 =====
Copyright (c) 1996, 1997, 1998, 1999, 2000
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.4T (GENERIC) #35: Mon Feb 21 21:02:36 JST 2000
    shin@narnia.sm.sony.co.jp:/usr/home/shin/current/src/sys/arch/hpcmips/compile/GENERIC
MIPS VR 4102 (NEC VR4102 rev0.3 53.620MHz)
total memory = 8192 KB
avail memory = 5588 KB
using 128 buffers containing 512 KB of memory
../../../../arch/hpcmips/vr/vr.c(236): vr_bus_reset() not implemented.
mainbus0 (root)
cpu0 at mainbus0: NEC VR4100 CPU Rev. 4.0 with software emulated floating point Rev. 0.0
cpu0: L1 cache: 4KB/16B Instruction, 1KB/16B Data, direct mapped
cpu0: No L2 cache
cpu0: install VR specific idle routine
fb0 at mainbus0: rasops 480x240 pixels, 4 colors, 60x24 chars
wsdisplay0 at fb0
wsdisplay0: screen 0 added (std, vt100 emulation)
vrip0 at mainbus0
vrcmu0 at vrip0 addr 0xb000060-0xb00007f
vrgiu0 at vrip0 addr 0xb000100-0xb00011f intr 8
WIN setting:                                iiiiiiiiiiiiiiiiioooooIIiiIIiIii
I/O setting:                                iiiiiiiiiiiiiiiiioooooiiiiiiiiii
       data:,,,,,,,,,,,,,,,,;;,,;;;;;;;;;;;;.................|..||.....|...|
pwctl0 at vrgiu0 port=14 id=0 on=1
vrbcu0 at vrip0 addr 0xb000000-0xb00001f
vrbcu: cpu 53.620MHz, bus 26.810MHz, ram 26.810MHz
com0 at vrip0 addr 0xc000000-0xc000007 intr 9: ns16550a, working fifo
com0: console
vrrtc0 at vrip0 addr 0xb0000c0-0xb0000df intr 2
vrkiu0 at vrip0 addr 0xb000180-0xb00019f intr 7
wskbd0 at vrkiu0 mux 1
vrpmu0 at vrip0 addr 0xb0000a0-0xb0000bf intr 1
vrpmu: Deadman's switch detected
vrdsu0 at vrip0 addr 0xb0000e0-0xb0000e7
vrpiu0 at vrip0 addr 0xb000120-0xb0002bf intr 5
wsmouse0 at vrpiu0
vrisab0 at vrgiu0:ISA port 0x14000000-0x18000000 mem 0x10000000-0x20000000
isa0 at vrisab0
pcic0 at isa0 port 0x3e0-0x3e1 iomem 0x70000-0x73fff irq 589827
pcic0: controller 0 (Intel 82365SL Revision 1) has socket A only
pcic0: controller 1 (Intel 82365SL Revision 1) has socket A only
pcmcia0 at pcic0 controller 0 socket 0
pcmcia1 at pcic0 controller 1 socket 0
../../../../arch/hpcmips/vr/vr.c(236): vr_bus_reset() not implemented.
ISA IRQ 3 -> GPIO port 9
pcic0: using irq 589827 for socket events
button manager
wdc0 at pcmcia0 function 0 port 0x14000300-0x1400030f
wd0 at wdc0 channel 0 drive 0: <SanDisk SDCFB-128>
wd0: drive supports 1-sector pio transfers, lba addressing
wd0: 122 MB, 980 cyl, 8 head, 32 sec, 512 bytes/sect x 250880 sectors
boot device: wd0
root on wd0a dumps on wd0b
isa_intr_alloc:............................|...
pcmcia0: card irq 3
isa_intr_alloc:............................|...
pcmcia0: card irq 3
isa_intr_alloc:............................|...
pcmcia0: card irq 3
WARNING: preposterous clock chip time
 -- CHECK AND RESET THE DATE!
root file system type: ffs
Enter pathname of shell or RETURN for sh: 
# 
===== end of log =====