hello.

Has anyone used PCMCIA Modem(build in mobile phone) card 
that worked on only DC 3.3V on the Jornada 720?

I put this card in PCMCIA slot. The messages then are :
/netbsd: sacpcic0: insertion event
/netbsd: com0 at pcmcia0 function 0
/netbsd: : serial device
/netbsd: com0: ns16550a, working fifo

% ls -l /dev/tty00 /dev/dty00
crw-rw---- 1 root wheel 12, 524288 Dec 8 16:14 /dev/dty00
crw-rw---- 1 root wheel 12,      0 Dec 8 16:24 /dev/tty00

% cu -s 115200 -l /dev/tty00
Connected.

But, there is no response both /dev/tty00 and /dev/dty00.
When connected, this card's LED indicated "No electric resource" and
"Radio wave are weak"(Red LED was lighted).

My hpcarm box dmesg are :
% dmesg
NetBSD 1.6K (YATTA) #0: Wed Dec  4 23:24:02 JST 2002
    taka@otasuke.ls-a.jp:/usr/local/src/NetBSD-current/src/sys/arch/hpcarm/compile/YATTA
total memory = 32768 KB
avail memory = 26284 KB
using 435 buffers containing 1740 KB of memory
mainbus0 (root)
cpu0 at mainbus0: SA-1110 step B-4 (SA-1 core)
cpu0: DC disabled IC disabled WB disabled EABT
cpu0: 16KB/32B 32-way Instruction cache
cpu0: 8KB/32B 32-way write-back Data cache
saip0 at mainbus0
saost0 at saip0 addr 0x90000000-0x9000001f
saost0: SA-11x0 OS Timer
sacom0 at saip0 addr 0xd000d000-0xd000d023 intr 17
sacom0: unknown SA11x0 UART
sacc0 at saip0 addr 0x40000000-0x40001fff
sacc0: SA1111 rev 2.1
sacpcic0 at sacc0
pcmcia0 at sacpcic0
pcmcia1 at sacpcic0
sed0 at saip0
sed0: Epson SED1356, console
sed0: framebuffer address: 0x48200000
hpcfb0 at sed0: 640x240 pixels, 65536 colors, 80x24 chars
wsdisplay0 at hpcfb0 kbdmux 1: console (std, vt100 emulation)
wsmux1: connecting to wsdisplay0
hpcfb: 640x240 pixels, 65536 colors, 80x24 chars
wsdisplay0: screen 1 added (std, vt100 emulation)
j720ssp0 at saip0 addr 0x80070000-0x800700ff
wskbd0 at j720ssp0: console keyboard, using wsdisplay0
wsmouse0 at j720ssp0 mux 0
ipl_bio=00020203 ipl_net=00020002 ipl_tty=00020002 ipl_imp=00020002
ipl_audio=00020002 ipl_imp=00020002 ipl_high=00020002 ipl_serial=00020002
clock: hz=100 stathz = 64
sacpcic0: card present
wdc0 at pcmcia1 function 0
wd0 at wdc0 channel 0 drive 0: <TOSHIBA THNCF1G02MA>
wd0: drive supports 1-sector PIO transfers, LBA addressing
wd0: 976 MB, 1985 cyl, 16 head, 63 sec, 512 bytes/sect x 2000880 sectors
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
warning: no /dev/console
hpcfb: 640x240 pixels, 65536 colors, 80x24 chars
wsdisplay0: screen 2 added (std, vt100 emulation)
hpcfb: 640x240 pixels, 65536 colors, 80x24 chars
wsdisplay0: screen 3 added (std, vt100 emulation)
hpcfb: 640x240 pixels, 65536 colors, 80x24 chars
wsdisplay0: screen 4 added (std, vt100 emulation)
sacpcic0: insertion event
ne0 at pcmcia0 function 0
ne0: SVEC/Hawking Tech. Combo Card Ethernet
ne0: Ethernet address 00:e0:98:00:4b:57


This card infomation is here:
NEC infrontia CFE-02
http://www.necinfrontia.co.jp/products/cf/cfe_02.htm
(Japanese only).


Sorry my english is poor. Thanks.

  <---- Takafumi Mizuno ----- ------- - -    -  -- -    --  -  -
 <--- taka@ls-a.jp / takam@sd.starcat.ne.jp ----  --  -  -
<-- * A blessed luckstone * ---- -------- - --  -- ---  -  - - -