B180L netboot, 5.0_STABLE kernel hangs

[Andy Ruhl <acruhl%gmail.com@localhost>]

For the heck of it I tried netbooting an old 32 bit parisc B180L machine.

I'm not putting too much time into this, I just wanted to mention what happened.

The kernel hung at the last message in this copy and paste from my terminal:

Main Menu: Enter command > boot lan
Interact with IPL (Y, N, Q)?> y

Booting...
Network Station Address 001083-30cf77
System IP Address 192.168.0.180
Server IP Address 192.168.0.12

Boot IO Dependent Code (IODC) revision 2


HARD Booted.



>> NetBSD/hp700 LIF/FFS/LFS Boot, Revision 1.4
>> (builds%b8.netbsd.org@localhost, Sun Dec 20 02:41:50 UTC 2009)
>> Enter "reset" to reset system.
Boot: [[[lf0a:]netbsd][-a][-c][-d][-s][-v][-q]] :-
7056656+110592+573440 [274912+263742]=0x92acdc
Start @ 0x200000 [1=0xaa7000-0xb2acdc]...
SPID bits: 0x0, error = -2
btlb info: minsz=128, maxsz=16384
btlb fixed: i=0, d=0, c=8
btlb varbl: i=0, d=0, c=0
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.0_STABLE (GENERIC) #0: Sun Dec 20 02:52:33 UTC 2009
        
builds%b8.netbsd.org@localhost:/home/builds/ab/netbsd-5/hp700/200912200000Z-obj/ho
me/builds/ab/netbsd-5/src/sys/arch/hp700/compile/GENERIC
HP9000/778/B180L (Merlin L2+ 180)
real mem = 128 MB (73728 reserved for PROM, 113 MB used by NetBSD)
avail mem = 111 MB
mainbus0 (root) [flex fff80000]
pdc0 at mainbus0
cpu0 at mainbus0 hpa 0xfffbe000 path 62 irq 31 ipl 0: PA7300LC (Velociraptor) re
v 12
cpu0: PCX-L2, PA-RISC 1.1e, lev 1, cat A, 180 MHz clk
cpu0: shadows, 64K/64K D/I caches, 96 shared TLB, 8 shared BTLB
cpu0: VR floating point, rev 1
mem0 at mainbus0 hpa 0xfffbf000 path 63: size 128MB, 1MB L2 cache
phantomas0 at mainbus0 hpa 0xffc00000 path 8
dino0 at phantomas0 hpa 0xfff80000 path 8/0 irq 28 ipl 1: Dino V3.1
pci0 at dino0 bus 0
esiop0 at pci0 dev 19 function 0: Symbios Logic 53c875 (ultra-wide scsi)
esiop0: using on-board RAM
esiop0: interrupting at irq 3
scsibus0 at esiop0: 16 targets, 8 luns per target
tlp0 at pci0 dev 20 function 0: DECchip 21143 Ethernet, pass 4.1
tlp0: interrupting at irq 0
tlp0: Ethernet address 00:10:83:30:cf:77
lxtphy0 at tlp0 phy 1: LXT970 10/100 media interface, rev. 0
lxtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
lasi0 at phantomas0 hpa 0xffc00000 path 8/16 irq 27: rev 3.0
gsc0 at lasi0
lpt0 at gsc0 hpa 0xffd02000 path 8/16/0 irq 7 ipl 3
harmony0 at gsc0 hpa 0xffd04000 path 8/16/1 irq 13 ipl 4: rev 0
audio0 at harmony0: full duplex, playback, capture
com0 at gsc0 hpa 0xffd05000 path 8/16/4 irq 5 ipl 5: ns16550a, working fifo
com0: console
osiop0 at gsc0 hpa 0xffd06000 path 8/16/5 irq 9 ipl 6: NCR53C710 rev 2, 40MHz, S
CSI ID 7
scsibus1 at osiop0: 8 targets, 8 luns per target
gsckbc0 at gsc0 hpa 0xffd08000 path 8/16/7 irq 26 ipl 7: keyboard
gsckbc1 at gsc0 hpa 0xffd08100 path 8/16/8: mouse
sti0 at phantomas0 hpa 0xf8000000 path 8/24: INTERNAL_EG_1280 rev 8.07;9, ID 0x2
D08C0A709A02587
sti0: 2048x2048 frame buffer, 1280x1024x8 display, offset 0x0
sti0: 8x16 font type 1, 16 bpc, charset 0-255
vmmask 000000fe schedmask 000000ff highmask 000000ff
scsibus0: waiting 2 seconds for devices to settle...
scsibus1: waiting 2 seconds for devices to settle...
wsdisplay0 at sti0 kbdmux 1