Hi,
i just wanted to thank Matt for his great work, even, if its not yet working
on my 712/60 Gecko. On my box i have exactly the same output that Thilo had
with his 715/80. Well, despite the machine model line of course. So i'm just
wondewring, that Jaap Boender got an further on his Gecko. May be he has a
different firmware version than me (2.3).

ciao yves...

----- Original Message -----
From: "Thilo Manske" <Thilo.Manske@HEH.Uni-Oldenburg.DE>
To: <port-hp700@netbsd.org>
Sent: Monday, March 04, 2002 3:53 AM
Subject: Re: hp 715 new snapshot


> >> NetBSD/hp700 LIF Boot, Revision 1.1
> >> (root@the-gates-of-delirium.home, Sat Mar  2 19:34:12 EST 2002)
> >> Enter "reset" to reset system.
> Boot: [[[lf0a:]netbsd][-a][-c][-d][-s][-v][-q]] :-
> 2115088+81920+188416 [281376+67537]=0x3187c8
> Start @ 0x80000 [1=0x342000-0x3987c8]...
> SPID bits: 0x0, error = -2
> [ using 354248 bytes of netbsd ELF symbol table ]
> Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001
>     The NetBSD Foundation, Inc.  All rights reserved.
> Copyright (c) 1982, 1986, 1989, 1991, 1993
>     The Regents of the University of California.  All rights reserved.
>
> NetBSD 1.5Z (GENERIC) #1: Sun Mar  3 11:25:18 EST 2002
>
root@the-gates-of-delirium.home:/data/union-hp700/src/sys/arch/hp700/compile
/GENERIC
> HP9000/715/80 (Mirage) PA-RISC 1.1
> real mem = 65536 KB (512 KB reserved for PROM, 51712 KB used by NetBSD)
> avail mem = 47988 KB
> using 844 buffers containing 3376 KB of memory
> mainbus0 (root)panic: mbattach: cannot map mainbus IO space
> Stopped in pid 0 (swapper) at   cpu_Debugger+0x10:      ldo
R'40(%r3),%r30
> db> trace
> cpu_Debugger(f00e0,0,1000,20) at cpu_Debugger+0x10
> panic(242020,3415a8,1000,0) at panic+0x140
> panic(0,d8bf80,2492a0,0) at panic+0xf0
> mbattach(0,3096bc,2492a0,0) at mbattach+0xc0
> config_attach(2492a0,2492a0,0,0) at config_attach+0x43c
> config_rootfound(33a620,0,3,ffffffff) at config_rootfound+0x64
> cpu_configure(338fd0,1,0,c0000000) at cpu_configure+0x6c
> configure(3a1000,0,0,0) at configure+0x5c
> main(0,0,0,0) at main+0x73c
> $callmain(0,0,0,0) at $callmain+0x8