Subject: Re: hp 715 new snapshot
To: Matt Fredette <fredette@theory.lcs.mit.edu>
From: None <mcmahill@mtl.mit.edu>
List: port-hp700
Date: 03/08/2002 22:32:27
> 
> Hi!  There is now a binary snapshot of NetBSD/hp700 available under:
> 
> ftp://ftp.netbsd.org/pub/NetBSD/arch/hp700/snapshot/20011209-1.5Z/
> 

Excellent work Matt.  This snapshot boots and seems more or less ok on my
715/33.

-Dan

----------------

sheik-yerbouti# dmesg
NetBSD 1.5Z (GENERIC) #1: Sun Mar  3 11:25:18 EST 2002

root@the-gates-of-delirium.home:/data/union-hp700/src/sys/arch/hp700/compile/GENERIC
HP9000/715/33 (Scorpio Jr.) PA-RISC 1.1
real mem = 32768 KB (512 KB reserved for PROM, 24064 KB used by NetBSD)
avail mem = 22140 KB
using 435 buffers containing 1740 KB of memory
mainbus0 (root) [flex fff80000]
pdc0 at mainbus0
mem0 at mainbus0 hpa fffbf000: viper rev 0, ctrl 19a10000<lpmc_en> size
32MB
cpu0 at mainbus0 hpa fffbe000 irq 31: PCXT rev 2, lev 1, cat A, 33.33 MHz
clk
cpu0: shadows, 64K/64K D/I caches, 120 shared TLB, 16 shared BTLB
cpu0: PCX-T (Rolex - CMOS-26B) floating point, rev 1
mongoose0 at mainbus0 hpa fc000000 irq 17: HWPC000 rev 0, 25 MHz
eisa0 at mongoose0
isa at mongoose0 not configured
asp0 at mainbus0 hpa f082f000 irq 28: Scorpio rev 1, lan 1 scsi 7
gsc0 at asp0: leds
"Advanced audio (ext.)" at gsc0 (type a, sv 7b) hpa f1000000 not
configured
lpt0 at gsc0 hpa f0824000 irq 7
com0 at gsc0 hpa f0822000 irq 5: ns16550a, working fifo
com1 at gsc0 hpa f0823000 irq 6: untouched, assumed serial console
"Core HIL" at gsc0 (type a, sv 73) hpa f0821000 not configured
ie0 at gsc0 hpa f0826000 irq 8: v0.0 address 08:00:09:62:e5:79, type
i82596DX
osiop0 at gsc0 hpa f0825000 irq 9: NCR53C700 rev 0, 33MHz, SCSI ID 7
scsibus0 at osiop0: 8 targets, 8 luns per target
sti0 at mainbus0 hpa f4000000: HPA1991AC19 rev 8.02;10
sti0: 2048x1024 frame buffer, 1280x1024x8 display, offset 0x0
sti0: 10x20 font type 1, 40 bpc, charset 0-255
wsdisplay0 at sti0
biomask 00000203 netmask 00000303 ttymask 000003a7
i82586_tint: command still busy; status=0x25ae; tail=0
iestatus = 0xa000
scsibus0: waiting 2 seconds for devices to settle...
cd0 at scsibus0 target 2 lun 0: <TOSHIBA, CD-ROM XM-3301TA, 0272> SCSI2
5/cdrom removable
cd0: async, 8-bit transfers
boot device: ie0
root on ie0