Ok i booted with the remote console and suddenly the kernel boots. If i 
switch back to local console, the kernel reset after this line:
Entry point: 0xfc803400.

hilconfig: unknown keyboard type 0xf, using default
btw. this I use a normal german-nodeadkeys-keyboard.  (HP C1429C #ABD)

Best Regards
Stephan

//-----------------------------------------------------------------------------------------------------------------------------------------------------------

Boot: [[[le0a:]netbsd][-a][-c][-d][-s][-v][-q]] :-
WARNING: bad date in battery clock
net_open: client addr: 192.168.10.21
net_open: subnet mask: 255.255.255.0
net_open: net gateway: 192.168.10.1
net_open: server addr: 192.168.10.1
net_open: server path: /pub/nfs/newton/root
boot: client IP address: 192.168.10.21
root addr=192.168.10.1 path=/pub/nfs/newton/root
976004+1563156+67580=0x27e924
Start @ 0xfc803400 [1=0xfca80698-0x27e924]...
Entry point: 0xfc803400
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 
2005, 2006
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 3.99.20 (RAMDISK) #0: Sat May 20 22:41:41 UTC 2006
        
builds@b3.netbsd.org:/home/builds/ab/HEAD/hp300/200605200000Z-obj/home/buildKHP 
9000/400 (50MHz MC68030 CPU+MMU, 50MHz MC68882 FPU, 32K physical-address 
cache)
total memory = 57332 KB
avail memory = 52468 KB
mainbus0 (root)
intio0 at mainbus0
rtc0 at intio0 addr 0x420000
frodo0 at intio0 addr 0x41c000 ipl 5
dnkbd at frodo0 offset 0x0 not configured
com0 at frodo0 offset 0x40: ns8250 or ns16450, no fifo
com1 at frodo0 offset 0x60: ns8250 or ns16450, no fifo
hil0 at intio0 addr 0x428000 ipl 1
dma0 at intio0 addr 0x500000 ipl 1: 98620C, 2 channels, 32-bit DMA
dio0 at mainbus0
com2 at dio0 scode 9 ipl 5: ns16550a, working fifo
com2: console
device id = 0x6 secid = 0x0 at dio0 scode 12 ipl 3 not configured
spc0 at dio0 scode 14 ipl 4: 98265A SCSI, 32-bit DMA, SCSI ID 7
scsibus0 at spc0: 8 targets, 8 luns per target
le0 at dio0 scode 21 ipl 5: address 08:00:09:11:93:58
le0: 8 receive buffers, 2 transmit buffers
topcat0 at dio0 scode 132 ipl 3: 1280 x 1024 256 color hi-res catseye 
display
grf0 at topcat0
ite0 at grf0
interrupt levels: bio = 4, net = 5, tty = 5
hilconfig: unknown keyboard type 0xf, using default
hil0 device 1: US ASCII keyboard
md0: internal 1500 KB image area
scsibus0: waiting 2 seconds for devices to settle...
sd0 at scsibus0 target 3 lun 0: <SEAGATE, ST32171N, HPM2> disk fixed
sd0: 2033 MB, 5172 cyl, 5 head, 161 sec, 512 bytes/sect x 4165272 sectors
sd0: async, 8-bit transfers
boot device: le0
root on md0a dumps on md0b
root file system type: ffs

//-----------------------------------------------------------------------------------------------------------------------------------------------------------

1285164/980+46956+255056+[166728+90787]=0x1c29ab
Start @ 0xfc803400 [166728=0xfc985bc0-0x1c29ac]...
Entry point: 0xfc803400
NetBSD 1.5.3 (GENERIC) #28: Tue Jul  2 04:00:12 MEST 2002
    he@isabel.urc.uninett.no:/usr/src/sys/arch/hp300/compile/GENERIC
HP 9000/400 (50MHz MC68030 CPU+MMU, 50MHz MC68882 FPU, 32K 
physical-address cache)
cpu: delay divisor 40, mmuid 5
total memory = 57332 KB
avail memory = 49936 KB
using 742 buffers containing 2968 KB of memory
Parity detection enabled
hilconfig: unknown keyboard type 0xf, using default
hil1: US ASCII keyboard
mainbus0 (root)
intio0 at mainbus0
frodo0 at intio0 addr 0x41c000
dnkbd at frodo0 offset 0x0 not configured
apci0 at frodo0 offset 0x40: no fifo
apci1 at frodo0 offset 0x60: no fifo
dio0 at mainbus0: 98620C, 2 channels, 32 bit DMA
dca0 at dio0 scode 9 ipl 5: console, working fifo
internal parallel at dio0 scode 12 not configured
oscsi0 at dio0 scode 14 ipl 4: 32 bit dma, async, scsi id 7
sd0 at oscsi0 targ 3 lun 0: <SEAGATE, ST32171N, HPM2> (SCSI-2)
sd0: 5172 cylinders, 5 heads, 4165272 blocks, 512 bytes/block
le0 at dio0 scode 21 ipl 5: address 08:00:09:11:93:58
le0: 8 receive buffers, 2 transmit buffers
topcat0 at dio0 scode 132: 1280 x 1024 256 color hi-res catseye display
grf0 at topcat0
ite0 at grf0
interrupt levels: bio = 4, net = 5, tty = 5
boot device: le0
root on le0