Subject: Re: NetBSD/hp300 changes
To: Gregory McGarry <g.mcgarry@ieee.org>
From: Jason R Thorpe <thorpej@wasabisystems.com>
List: port-hp300
Date: 11/03/2001 23:23:40
On Sun, Nov 04, 2001 at 07:56:57PM +1300, Gregory McGarry wrote:

 > This is just a heads-up to notify everyone that I'm sitting on
 > some changes to NetBSD/hp300.  The changes basically overhaul
 > all graphics, console, I/O and HIL support.  The changes are
 > quite pervasive and I tried not to break the existing drivers,
 > but interrupt dispatching was affected.

This is FANTASTIC.  Thank you very much!!

 > 
 > There's more to do.  The X server will be next.
 > 
 > 	-- Gregory McGarry <g.mcgarry@ieee.org>
 > 
 > 
 > [ using 132744 bytes of netbsd ELF symbol table ]
 > Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001
 >     The NetBSD Foundation, Inc.  All rights reserved.
 > Copyright (c) 1982, 1986, 1989, 1991, 1993
 >     The Regents of the University of California.  All rights reserved.
 > 
 > NetBSD 1.5Y (KERMIT_WSCONS) #227: Sun Nov  4 14:50:46 NZDT 2001
 >     gmcgarry@gonzo:/storage/netbsd/KERMIT_WSCONS
 > HP 9000/340 (16.67MHz MC68030 CPU+MMU, 16.67MHz MC68882 FPU)
 > total memory = 4084 KB
 > avail memory = 2576 KB
 > using 16 buffers containing 65536 of memory
 > mainbus0 (root)
 > intio0 at mainbus0
 > rtc0 at intio0 addr 0x420000
 > xhil0 at intio0 addr 0x428000 ipl 1
 > xhilkbd0 at xhil0
 > wskbd0 at xhilkbd0: console keyboard
 > xhilms0 at xhil0
 > wsmouse0 at xhilms0
 > xtopcat0 at intio0 addr 0x560000: CatsEye 1024x768 6-bit colour display
 > wsdisplay0 at xtopcat0 kbdmux -1: console (std, vt100 emulation), using wskbd0
 > dio0 at mainbus0: 98620C, 2 channels, 32 bit DMA
 > nhpib0 at dio0 scode 7 ipl 3: internal HP-IB
 > hpibbus0 at nhpib0
 > dca0 at dio0 scode 9 ipl 5: no fifo
 > fhpib0 at dio0 scode 14 ipl 4: 98625A/98625B HP-IB
 > hpibbus1 at fhpib0
 > le0 at dio0 scode 21 ipl 5: address 08:00:09:04:ea:0c
 > le0: 8 receive buffers, 2 transmit buffers
 > interrupt levels: bio = 4, net = 5, tty = 5
 > boot device: le0
 > root on le0
 > nfs_boot: trying DHCP/BOOTP
 > nfs_boot: DHCP next-server: 192.168.1.32
 > nfs_boot: my_domain=coaxnet
 > nfs_boot: my_addr=192.168.1.40
 > nfs_boot: my_mask=255.255.255.0
 > nfs_boot: gateway=192.168.1.254
 > root on 192.168.1.32:/storage/export/hp300
 > root file system type: nfs

-- 
        -- Jason R. Thorpe <thorpej@wasabisystems.com>