Hello everyone, I am new to this group.  I have two questions to start
off on.

(I have a 320 or 330 I don't know which)

1. Is the ethernet BNC connector on the Sysetm Interface Board used
like any other ethernet BNC connector. (I mean do you need a T
connector and two terminators at either end of the line?  Call me OVER
Cautious but I just don't want to fry the board)

2. At the time being I can only bring up my box over a serial terminal
up to the point that it starts searching for a SYSTEM (because I
haven't configured a net-boot system yet) and I am getting TRASH from
the box (HYPER TERMINAL in Win98 and also a HP 700/41 Terminal).

Serial dump, I put what I thought should come up at the end (From Hyper
Terminal in Win98):

<--Begin-Dump:-->

ÿHJ&a0C&a0Y&a0C&a22Y                                             
                                  &a0C&a22Y SELF-TEST
MODE&a0C&a0YCopyright 1988,                        
&a0C&a1YHewlett-Packard Company.                &a0C&a2YAll Rights
Reserved.                    &a0C&a3Y                                
       &a0C&a4YBOOTROM Rev. C1                        
&a0C&a5YMC68020 Processor                       &a0C&a6YMC68881
Coprocessor                     &a0C&a7YKeyboard                     
          &a76C&a23Y   &a40C&a7Y&a0C&a23Y                        
                                                      &a0C&a23Y RESET
To Power-Up&a0C&a22Y                                                 
                              &a0C&a22Y LOADING MEMORY&a0C&a22Y    
                                                                       
   &a0C&a22Y SELF-TEST MODE&a0C&a8YHP-IB                           
       &a0C&a9YDMA-C0                                  &a0C&a22Y   
                                                                       
    &a0C&a22Y TESTING MEMORY&a0C&a22Y                              
                                                 &a0C&a22Y SELF-TEST
MODE&a0C&a10YRAM 4194080 Bytes                      
&a0C&a11YHP98644 (RS232) at 9                    &a0C&a12YHP98642
(RS232 MUX) at 13               &a0C&a12YHP98642 (RS232 MUX) at 13   
           &a0C&a13YHP98625 (HPIB) at 14                   
&a0C&a13YHP98625 (HPIB) at 14                    &a0C&a14YHP98642
(RS232 MUX) at 15               &a0C&a14YHP98642 (RS232 MUX) at 15   
           &a0C&a15YHP98642 (RS232 MUX) at 16              
&a0C&a15YHP98642 (RS232 MUX) at 16               &a0C&a16YHP98643
(LAN) at 21                     &a0C&a16YHP98643 (LAN) at 21,
08000902DA9E       &a0C&a22Y                                         
                                      &a0C&a22Y SEARCHING FOR A
SYSTEM (RETURN To Pause)&a40C&a21Y                                   
    &a40C&a20Y 

<--:End-Dump-->

<--Begin-What I think:-->

 SELF-TEST MODE
Copyright 1988,
Hewlett-Packard Company.
All Rights Reserved.

BOOTROM Rev. C1
MC68020 Processor
MC68881 Coprocessor
Keyboard


 RESET To Power-Up

 LOADING MEMORY

 SELF-TEST MODE
HP-IB
DMA-C0

 TESTING MEMORY

 SELF-TEST MODE
RAM 4194080 Bytes
HP98644 (RS232) at 9
HP98642 (RS232 MUX) at 13
HP98642 (RS232 MUX) at 13
HP98625 (HPIB) at 14
HP98625 (HPIB) at 14
HP98642 (RS232 MUX) at 15
HP98642 (RS232 MUX) at 15
HP98642 (RS232 MUX) at 16
HP98642 (RS232 MUX) at 16
HP98643 (LAN) at 21
HP98643 (LAN) at 21, 08000902DA9E

 SEARCHING FOR A SYSTEM (RETURN To Pause)

<--:End-What I think-->

Thanks in advance for any help.

David