(A copy of this message has also been posted to the following newsgroups:
comp.sys.hp.hardware, comp.sys.hp.hpux)

I've got a *lot* of Series 300 equipment I'm dumping soon (since my
storage space is going away).  I'd be wiling to sell most things on this
list for about US$20 (except the color monitors).  You pay shipping (or
pick it up in Ithaca, NY  USA).

Items with a * will be thrown out by August 1, 1999.
Items with a % do not have *BSD drivers.

The portable (i.e. cheaply shipped) stuff:

motherboards (not complete systems, see chassis below under "heavy" stuff)
1  320 (15 MHz 68020)
1  Human Interface board, for 320, 330, 350
1  360 (25 Mhz 68030, with 16 MB RAM)
2  370 (33 MHz 68030, with 64 KB L2 cache)
3  System interface board (with fast HP-IB) for 360, 370
1  EEPROM and oscillator for upgrade to 425s or 425t

RAM
2  512 KB boards for 320, 330, 350
10 1 MB boards for 320, 330, 350
3  16 MB boards for 360, 370
2  4 MB boards for 345, 375, 380, 4XXs, 4XXt

framebuffers
3  98544B "topcat" (1024x768, 1 bit)
5  98550/A1416A "catseye" (1280x1024, 60 Hz, 8 bit)
1% 98705 "tigershark" (1280x1024, 60 Hz, 8 bit hardware doublebuffered)

Keyboards/mice
2  HP-HIL 3 button mice (they have slightly banged up left button)
5  HP-HIL 2 button mice
2% Domain keyboards
1% Domain mouse
1  46087A HP-HIL graphics tablet with pen
1% 46086A HP-HIL button box (32 buttons)
1% 46085A HP-HIL dial box (9 knobs)
lots  HP-HIL cables and extenders

misc
2  98638A 8 port serial multiplexer (i.e. 8 19200 bps serial ports)
2  AUI LAN boards (DIO-I)
2  fast HP-IB boards (DIO-I)
1% 98248B floating point accel for 360/370 (thorpej has programmer's guide)
1  DIO-I to DIO-II card adapter
5  16 track HP-formatted QIC tapes
5  32 track HP-formatted QIC tapes
some  HP-IB cables

Heavy stuff, i.e. you should probably pick it up in Ithaca, NY:

Storage
1* 7958B 150 MB HP-IB hard drive
4  7959B 300 MB HP-IB hard drives
4* 7937H 500 MB fast HP-IB hard drives (over 200 lbs)
1* 9144 16 track (i.e. 60 MB) QIC HP-IB tape drive
4* 9145 32 track (i.e. 120 MB) QIC HP-IB tape drive
2  35450A DDS-I SCSI DAT drives (model C1502-69203)
1* 2060S Archive Viper SCSI QIC drive (60 MB), non-HP format (i.e. normal)

graphics devices
1* 98720 "renaissance box" (1280x1024, 60 Hz, 24 bit, 3d accelerated)
   incl DIO-I interface card
1*%   98735X (1280x1024, 72 Hz, 24 bit, 3d accelerated) (over 200 lbs)
   incl SGC interface card (only for pa-risc machines with SGC slot)

monitors
2* 98786A (1024x768 monochrome), for use with 98544B
8  19" Sony 1280x1024 at 60 Hz monitors (for use with 98720, 98550,
A1416A)
4  dumb terminals (19200 bps, one HP, three no-name)

chassis/powersupplies (or I can make complete systems from light stuff, above)
1  complete 400t system (50 MHz 68030, 16 MB RAM, no HD, 1 DIO-II slot)
1  complete 400s system (50 MHz 68030, 32 MB RAM, no HD, 3 DIO-II slots)
1* chassis/powersupply with 2 DIO-II slots, 12 DIO-I slots (for 320)
1  chassis/powersupply with 6 DIO-II slots, 4 DIO-I slots (for 360, 370)
1* chassis/powersupply with 4 DIO-II slots (for 360, 370)
1  chassis/powersupply with 8 DIO-II slots (for 360, 370)
1* chassis/powersupply with 8 DIO-II slots, 4 VME slots (for 360, 370)
1* power supply for model 340
4* power supplies for 4XXt machines

misc
*lots of rackmount stuff (racks, shelves, sliders, front panels)