Hi
 I looked at the dcm man page, and the makedev script, and they both
state that i should be able to use the dcm ports as tty00-tty0f (16
ports).

 However, when i do a 

cu -l tty00, i get a permission denied. Just today on the sparc list,
someone has the same problem. I changed the permissions, and with the same
results.

What is strange, (to me at least) is that cu -l tty0 works fine. That is
the rs-232 port.

So, looking at the dmesg output, is there anything i am doing wrong? The
power light is on my 8 port MUX. Since i have to dcm cards, i have tried
in both of them, the result is always the same, for all tty0X.

Thanks

Chris

NetBSD 1.4 (GENERIC) #2: Fri May  7 21:37:43 PDT 1999
    oster@zoot:/fujitsu/zoot/src/sys/arch/hp300/compile/GENERIC
HP 9000/425 (25MHz MC68040 CPU+MMU+FPU, 4k on-chip physical I/D caches)
cpu: delay divisor 30, mmuid 7
real mem  = 33542144
avail mem = 26624000
using 818 buffers containing 3350528 bytes of memory
Parity detection enabled
hil1: US ASCII keyboard
mainbus0 (root)
intio0 at mainbus0
frodo0 at intio0 addr 0x41c000
dnkbd at frodo0 offset 0x0 not configured
apci at frodo0 offset 0x20 not configured
apci0 at frodo0 offset 0x40: no fifo
apci1 at frodo0 offset 0x60: no fifo
dio0 at mainbus0: 98620C, 2 channels, 32 bit DMA
nhpib0 at dio0 scode 7 ipl 3: internal HP-IB
hpibbus0 at nhpib0
ppi0 at hpibbus0 slave 5 punit 0
dca0 at dio0 scode 9 ipl 5: working fifo
internal parallel at dio0 scode 12 not configured
oscsi0 at dio0 scode 14 ipl 4: 32 bit dma, async, scsi id 7
st0 at oscsi0 targ 3 lun 0: <HP, HP35450A      -A, BE00> (SCSI-2)
sd0 at oscsi0 targ 4 lun 0: <HP, 2213A, C023>
sd0: 1457 cylinders, 16 heads, 1296512 blocks, 512 bytes/block
sd1 at oscsi0 targ 6 lun 0: <HP, 2213A, C023>
sd1: 1457 cylinders, 16 heads, 1296512 blocks, 512 bytes/block
le0 at dio0 scode 21 ipl 5: address 08:00:09:13:b5:f9
le0: 8 receive buffers, 2 transmit buffers
dcm0 at dio0 scode 26 ipl 3
dcm1 at dio0 scode 27 ipl 3
dcm2 at dio0 scode 28 ipl 3
dcm3 at dio0 scode 29 ipl 3
topcat0 at dio0 scode 133: 1280 x 1024 256 color hi-res catseye display
grf0 at topcat0
ite0 at grf0: console
interrupt levels: bio = 4, net = 5, tty = 5
boot device: le0
nfs_boot: trying RARP (and RPC/bootparam)
nfs_boot: hostname=hp300
root on alpha:/usr/netbsd/hp300
WARNING: bad date in battery clock
root file system type: nfs
alpha#