On Sat, Apr 22, 2006 at 07:25:01AM -0700, Garrett D'Amore wrote:
> 
> Water NB wrote:
> > I noticed that there are line "hptide*" and "wd*" in file DBAU1550.
> > But my board couldn't find hpt37x device when startup.
> > I want to know whether it supports harddisk.
> >
> > thanks.
> >   
> 
> My board sees it just fine.  Can you send me your dmesg output?

source code was updated on April 22.

################ config file: m1550nfs ##########
include         "arch/evbmips/conf/DBAU1550"

no makeoptions DEFTEXTADDR
makeoptions DEFTEXTADDR="0x80100000"
options         INET6

file-system     KERNFS          # kernel data-structure filesystem
file-system     PROCFS          # /proc
options         INSECURE        # disable kernel security levels
pseudo-device   ksyms
> 
################ output ##########


YAMON ROM Monitor, Revision 02.23DB1550.
Copyright (c) 1999-2000 MIPS Technologies, Inc. - All Rights Reserved.

For a list of available commands, type 'help'.

Compilation time =            Apr  4 2006  18:05:32
MAC address =                 00.00.1a.19.0c.26
Processor Company ID =        0x03
Processor ID/revision =       0x02 / 0x00
Endianness =                  Little
CPU =                         396 MHz
Flash memory size =           128 MByte
SDRAM size =                  192 MByte
First free SDRAM address =    0x8008cef4

Environment variable 'start' exists. After 2 seconds
it will be interpreted as a YAMON command and executed.
Press Ctrl-C to bypass this.

About to load tftp://192.168.32.1/netbsd.srec
Press Ctrl-C to break
........................................
........................................
........................................
........................................
........................................
........................................
........................................
........................................
........................................
........................................
.............................
Start = 0x80100000, range = (0x80100000,0x80459bcf), format = SREC
MIPS32/64 params: cpu arch: 32
MIPS32/64 params: TLB entries: 32
MIPS32/64 params: Icache: line = 32, total = 16384, ways = 4
                 sets = 128
MIPS32/64 params: Dcache: line = 32, total = 16384, ways = 4
                 sets = 128
  picache_stride    = 4096
  picache_loopcount = 4
  pdcache_stride    = 4096
  pdcache_loopcount = 4
  Dcache is coherent
  Icache is coherent against Dcache
DBAu1550 (cabernet), CPLDv1, no daughtercard
Memory size: 0x0c000000
[ Kernel symbol table missing! ]
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 3.99.18 (m1550nfs) #4: Sat Apr 22 15:24:20 CST 2006
        root@PC-026:/opt/netbsd/world/mipsel_obj/sys/arch/evbmips/compile/m1550n
fs
AMD Alchemy DBAu1550
total memory = 192 MB
avail memory = 182 MB
mainbus0 (root)
cpu0 at mainbus0: 396.00MHz (hz cycles = 773438, delay divisor = 396)
cpu0: Alchemy Au1550 (Rev 2 core) (0x3030200) Rev. 0 with software emulated floa
ting point
cpu0: 16KB/32B 4-way set-associative L1 Instruction cache, 32 TLB entries
cpu0: 16KB/32B 4-way set-associative write-back L1 Data cache
obio0 at mainbus0
aubus0 at mainbus0
aucom0 at aubus0 addr 0x11100000 irq 0: Au1X00 UART, working fifo
aucom0: console
aucom1 at aubus0 addr 0x11200000 irq 8: Au1X00 UART, working fifo
aucom2 at aubus0 addr 0x11400000 irq 9: Au1X00 UART, working fifo
aurtc0 at aubus0: Au1X00 programmable clock
aumac0 at aubus0 addr 0x10500000 irq 27: Au1X00 10/100 Ethernet
aumac0: Ethernet address 00:00:1a:19:0c:26
acphy0 at aumac0 phy 31: AC101 10/100 media interface, rev. 11
acphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
aumac1 at aubus0 addr 0x10510000 irq 28: Au1X00 10/100 Ethernet
aumac1: Ethernet address 00:00:1a:19:1c:26
acphy1 at aumac1 phy 31: AC101 10/100 media interface, rev. 11
acphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ohci0 at aubus0 addr 0x14020000 irq 26: Alchemy OHCI
ohci0: OHCI version 1.0
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x0000 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
aupci0 at aubus0 addr 0x14005000: Alchemy Host-PCI Bridge, 66MHz
pci0 at aupci0 bus 0
pci0: i/o space, memory space enabled
augpio0 at aubus0 addr 0x11900100: Alchemy GPIO, primary block
gpio0 at augpio0: 27 pins
augpio1 at aubus0 addr 0x11700000: Alchemy GPIO, secondary block
gpio1 at augpio1: 16 pins
aupcmcia0 at aubus0: Alchemy PCMCIA, 2 slots
pcmcia0 at aupcmcia0 socket 0 irq 35, bottom slot
pcmcia1 at aupcmcia0 socket 1 irq 37, top slot
aupsc at aubus0 addr 0x11a00000 irq 10 not configured
aupsc at aubus0 addr 0x11b00000 irq 11 not configured
aupsc at aubus0 addr 0x10a00000 irq 12 not configured
aupsc at aubus0 addr 0x10b00000 irq 13 not configured
root device: aumac0
dump device:
file system (default generic):
root on aumac0
mountroot: trying ffs...
mountroot: trying nfs...
nfs_boot: trying DHCP/BOOTP
aumac0: link state changed to UP
nfs_boot: DHCP next-server: 192.168.32.1
nfs_boot: my_addr=192.168.32.33
nfs_boot: my_mask=255.255.255.0
nfs_boot: gateway=192.168.32.1
root on 192.168.32.1:/opt/netbsd/au1550root
root time: 0x444b0b66
root file system type: nfs
WARNING: clock lost 13255 days -- CHECK AND RESET THE DATE!
init path (default /sbin/init):
init: copying out path `/sbin/init' 11
Tue Jan  6 21:34:12 CST 1970
Checking for botched superblock upgrades: done.
Starting file system checks:
mount: /: unknown special file or file system.
Setting tty flags.
Setting sysctl variables:
Starting network.
Hostname: au1550
IPv6 mode: host
Configuring network interfaces:.
add net default: gateway 192.168.32.1
Adding interface aliases:
Building databases...
192.168.32.1:/opt/netbsd/au1550root: inaccurate wcc data (ctime) detected, disab
ling wcc
Starting syslogd.
Checking for core dump...
savecore: no core dump (no dumpdev)
Mounting all filesystems...
Clearing /tmp.
Checking quotas: done.
Starting virecover.
Jan  6 21:34:20 au1550 /netbsd: aumac0: link state changed to UP
Starting local daemons:.
Updating motd.
Starting sshd.
Starting sendmail.
Starting inetd.
Starting cron.
Tue Jan  6 21:34:24 CST 1970

NetBSD/evbmips (au1550) (console)

login: root
Jan  6 21:34:32 au1550 login: ROOT LOGIN (root) ON console
Last login: Mon Jan  5 21:15:41 1970 on console
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 3.99.18 (m1550nfs) #4: Sat Apr 22 15:24:20 CST 2006

Welcome to NetBSD!

You have mail.
Terminal type is vt100.
We recommend creating a non-root account and using su(1) for root access.
au1550#
>