Hi Folks,

after i try to use the NetBSD 3.0 CD, the installations begin
as described in the consol log file. 

The LCD is showing the message "preparing the installation" and
then th box hung.

I also try to use the newer 3.99.17 CD, but this wan't work to.
Any ideas ?

Rgards,
Jofry

-->

Direct Connect console
Cobalt Microserver Diagnostics - 'We serve it, you surf it'
Built Mon Aug 24 14:44:00 PDT 1998

 1.LCD Test................................PASS
 2.Controller Test.........................PASS
 4.Flash Test..............................PASS
 5.Bank 0:.................................64M
 6.Bank 1:.................................0M
 7.Bank 2:.................................64M
 8.Bank 3:.................................0M
 9.Serial Test.............................PASS
10.PCI Expansion Slot....................**EMPTY**
12.IDE Test................................PASS
13.Ethernet Test...........................PASS
16.RTC Test................................PASS
Decompressing done
Decompressing -/ done.
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.6.1 (INSTALL.LCD) #0: Thu Jun 26 22:29:11 CEST 2003
   
cdi@merlin.camelot.net:/misc/home/cdi/src/netbsd/1.6.1/src/sys/arch/cobalt/c
ompile/INSTALL.LCD
128 MB memory, 116 MB free, 6656 KB in 1664 buffers
mainbus0 (root)
com0 at mainbus0 addr 0x1c800000 level 3: st16650a, working fifo
com0: console
cpu0 at mainbus0: QED RM5200 CPU (0x2810) Rev. 1.0 with built-in FPU
Rev. 1.0
cpu0: 16KB/32B 2-way set-associative L1 Instruction cache, 48 TLB entries
cpu0: 16KB/32B 2-way set-associative write-back L1 Data cache
gt0 at mainbus0 addr 0x14000000
pci0 at gt0
pci0: i/o space, memory space enabled, rd/line, wr/inv ok
pchb0 at pci0 dev 0 function 0: Galileo GT-64011 System Controller, rev 2
tlp0 at pci0 dev 7 function 0: DECchip 21143 Ethernet, pass 4.1
tlp0: interrupting at level 1
tlp0: Ethernet address 00:10:e0:00:16:94
lxtphy0 at tlp0 phy 1: LXT970 10/100 media interface, rev. 0
lxtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib0 at pci0 dev 9 function 0
pcib0: VIA Technologies VT82C586 (Apollo VP) PCI-ISA Bridge, rev 39
pciide0 at pci0 dev 9 function 1: VIA Technologies VT82C586 (Apollo VP)
ATA33 co
ntroller
pciide0: bus-master DMA support present
pciide0: primary channel configured to compatibility mode
wd0 at pciide0 channel 0 drive 0: <ST315323A>
wd0: drive supports 32-sector PIO transfers, LBA addressing
wd0: 14592 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 29886400 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using
DMA data
transfers)
pciide0: secondary channel configured to compatibility mode
pciide0: secondary channel ignored (disabled)
VIA Technologies VT83C572 USB Controller (USB serial bus, revision 0x02)
at pci0
 dev 9 function 2 not configured
lcd0 at mainbus0
boot device: <unknown>
root on tlp0
nfs_boot: trying DHCP/BOOTP
nfs_boot: DHCP next-server: 10.0.0.254
nfs_boot: my_domain=mfg.cobaltmicro.com
nfs_boot: my_addr=10.0.0.160
nfs_boot: my_mask=255.0.0.0
root on 10.0.0.254:/nfsroot
warning: no /dev/console
init: Creating mfs /dev
Sat Oct 28 20:28:04 GMT 2006
Starting file system checks:
tlp0: receive error: CRC error
Coming up: fixing /dev...
Coming up: fixing /var...
Preparing the installation...
Setting tty flags.
Setting sysctl variables:
Starting network.
Hostname: client
Configuring network interfaces:.
Building databases...
kvm_mkdb: machdep.booted_kernel: the value is not available: No such
file or dir
ectory
Mounting all filesystems...
Checking quotas: done.
Setting securelevel: kern.securelevel: 0 -> 1
/etc/rc: WARNING: No swap space configured!
starting local daemons:

<--


--
easyRedak: Effizient Beiträg für Film & TV verwalten -  gezielt werben 
Mehr zu  dem (pro)³  Leistungspektrum lesen Sie hier http://procube.de