Hi list:
         I've recently restore a Raq2 beautifully with the Netbsd CD,
but i'm having serious trouble with two Raq Cache, also based on Mips
CPU, this are the Output console of both Servers:

Raq Cache:

Cobalt Microserver Diagnostics - 'We serve it, you surf it'
Built Mon Aug 24 14:44:00 PDT 1998

1.LCD Test................................PASS
2.Controller Test.........................PASS
4.Flash Test..............................PASS
5.Bank 0:.................................64M
6.Bank 1:.................................64M
7.Bank 2:.................................64M
8.Bank 3:.................................64M
9.Serial Test.............................PASS
10.PCI Expansion Slot....................**EMPTY**
12.IDE Test................................PASS
13.Ethernet Test...........................PASS
16.RTC Test................................PASS
Decompressing done
Decompressing -/ done.
invalid bootinfo (standalone boot?)
[ Kernel symbol table missing! ]
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
   The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
   The Regents of the University of California.  All rights reserved.

NetBSD 3.99.17 (INSTALL) #0: Thu Mar 23 15:31:02 MSK 2006
       cdi@falcon:/build/netbsd-3.99.x/obj/cobalt/sys/arch/cobalt/compile/INSTA
LL
total memory = 256 MB
avail memory = 248 MB
mainbus0 (root)
com0 at mainbus0 addr 0x1c800000 level 3: st16650a, working fifo
com0: console
cpu0 at mainbus0: QED RM5200 CPU (0x2810) Rev. 1.0 with built-in FPU Rev. 1.0
cpu0: 16KB/32B 2-way set-associative L1 Instruction cache, 48 TLB entries
cpu0: 16KB/32B 2-way set-associative write-back L1 Data cache
panel0 at mainbus0 addr 0x1f000000
gt0 at mainbus0 addr 0x14000000





-------------------------------------------------------------------------------------------------------------------------------

Raq Cache2

Cobalt Microserver Diagnostics - 'We serve it, you surf it'
Built Tue May 25 15:58:41 PDT 1999

 1.LCD Test................................PASS
 2.Controller Test.........................PASS
 5.Bank 0:.................................16M
 6.Bank 1:.................................0M
 7.Bank 2:.................................16M
 8.Bank 3:.................................0M
 9.Serial Test.............................PASS
10.PCI Expansion Slot....................**EMPTY**
12.IDE Test................................PASS
13.Ethernet Test...........................PASS
16.RTC Test................................PASS
Decompressing done
Executing bootloader kernel...
Decompressing -- done.
invalid bootinfo (standalone boot?)
[ Kernel symbol table missing! ]
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 3.99.17 (INSTALL) #0: Thu Mar 23 15:31:02 MSK 2006
        cdi@falcon:/build/netbsd-3.99.x/obj/cobalt/sys/arch/cobalt/compile/INSTA
LL
total memory = 32768 KB
avail memory = 30236 KB
mainbus0 (root)
com0 at mainbus0 addr 0x1c800000 level 3: st16650a, working fifo
com0: console
cpu0 at mainbus0: QED RM5200 CPU (0x28a0) Rev. 10.0 with built-in FPU Rev. 10.0
cpu0: 32KB/32B 2-way set-associative L1 Instruction cache, 48 TLB entries
cpu0: 32KB/32B 2-way set-associative write-back L1 Data cache
panel0 at mainbus0 addr 0x1f000000
gt0 at mainbus0 addr 0x14000000
pci0 at gt0
pci0: i/o space, memory space enabled, rd/line, wr/inv ok
pchb0 at pci0 dev 0 function 0: Galileo GT-64111 System Controller, rev 1
tlp0 at pci0 dev 7 function 0: DECchip 21143 Ethernet, pass 4.1
tlp0: interrupting at level 1
tlp0: Ethernet address 00:10:e0:00:85:2a
lxtphy0 at tlp0 phy 1: LXT970 10/100 media interface, rev. 3
lxtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib0 at pci0 dev 9 function 0
pcib0: vendor 0x1106 product 0x0586, rev 39
viaide0 at pci0 dev 9 function 1
viaide0: VIA Technologies VT82C586 (Apollo VP) ATA33 controller
viaide0: bus-master DMA support present
viaide0: primary channel configured to compatibility mode
viaide0: primary channel interrupting at irq 14
atabus0 at viaide0 channel 0
viaide0: secondary channel configured to compatibility mode
viaide0: secondary channel interrupting at irq 15
atabus1 at viaide0 channel 1
vendor 0x1106 product 0x3038 (USB serial bus, revision 0x02) at pci0 dev 9 funct
ion 2 not configured
tlp1 at pci0 dev 12 function 0: DECchip 21143 Ethernet, pass 4.1
tlp1: interrupting at level 2
tlp1: Ethernet address 00:10:e0:00:85:2b
lxtphy1 at tlp1 phy 1: LXT970 10/100 media interface, rev. 3
lxtphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
wd0 at atabus0 drive 0: <QUANTUM FIREBALL EX12.7A>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 12159 MB, 24704 cyl, 16 head, 63 sec, 512 bytes/sect x 24901632 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
wd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
boot device: <unknown>
root on tlp0
nfs_boot: trying DHCP/BOOTP
tlp0: link state changed to DOWN
tlp0: link state changed to UP
nfs_boot: DHCP next-server: 10.0.0.254
nfs_boot: my_domain=netbsd.org
nfs_boot: my_addr=10.0.0.159
nfs_boot: my_mask=255.0.0.0
nfs_boot: gateway=10.0.0.254
root on 10.0.0.254:/nfsroot
trap: TLB miss (load or instr. fetch) in kernel mode
status=0x7c03, cause=0x8, epc=0x80040c98, vaddr=0xc014fa04
pid=13 cmd=date usp=0x7fffd790 ksp=0xc41898f8
Stopped in pid 13.1 (date) at   0x80040c98:     lw      v0,4(s4)
db>

Do you have any ideas what it's going on? Hardware issue? Not
supported hardware? software issue??

Thanks very much.



-- 
Facundo Agustin Barrera
IT Management.
Buenos Aires - Argentina.