On 11/15/05, Izumi Tsutsui <tsutsui@ceres.dti.ne.jp> wrote:
> > Could you please try the attached patch for netbsd-3?
> > I'll send a pullup request if it actually fixes your problem.
>
> I've put a compiled kernel:
> http://www.ceres.dti.ne.jp/~tsutsui/netbsd/netbsd-cobalt-cachefix-3.0_RC1=
.gz

Thanks Izumi. I was going to try again to patch my 3.0 source tree but
it looks like you did it for me and made a build. I grabbed that
kernel and booted it. I will test it for a while. Thanks! Here's the
dmesg:

Cobalt Microserver Diagnostics - 'We serve it, you surf it'
Built Tue May 25 15:58:41 PDT 1999

 1.LCD Test................................PASS
 2.Controller Test.........................PASS
 5.Bank 0:.................................64M
 6.Bank 1:.................................64M
 7.Bank 2:.................................16M
 8.Bank 3:.................................16M
 9.Serial Test.............................PASS
10.PCI Expansion Slot....................**EMPTY**
12.IDE Test................................PASS
13.Ethernet Test...........................PASS
16.RTC Test................................PASS
BOOTLOADER ramcode: selected partition /dev/hda1
Decompressing done
Executing bootloader kernel...
Decompressing - done.

>> NetBSD/cobalt 3.0_BETA Bootloader, Revision 0.1 [@0x80f00000]
>> (root@foghorn, Mon Sep 19 12:47:05 MST 2005)
>> Memory:              163840 k
>> PROM boot string:    root=3D/dev/hda1 ro
Boot [wd0a:netbsd]:
Loading: wd0a:netbsd
2551056+147900 [86192+77749]=3D0x2bb2b0
Starting at 0x80001000

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 3.0_RC1 (GENERIC) #0: Tue Nov 15 20:57:03 JST 2005
        tsutsui@mirage:/amd/eclipse/r/work/src-3.0/src/sys/arch/cobalt/comp=
ile/GENERIC
total memory =3D 160 MB
avail memory =3D 153 MB
mainbus0 (root)
com0 at mainbus0 addr 0x1c800000 level 3: st16650a, working fifo
com0: console
cpu0 at mainbus0: QED RM5200 CPU (0x28a0) Rev. 10.0 with built-in FPU Rev. =
10.0
cpu0: 32KB/32B 2-way set-associative L1 Instruction cache, 48 TLB entries
cpu0: 32KB/32B 2-way set-associative write-back L1 Data cache
panel0 at mainbus0 addr 0x1f000000
gt0 at mainbus0 addr 0x14000000
pci0 at gt0
pci0: i/o space, memory space enabled, rd/line, wr/inv ok
pchb0 at pci0 dev 0 function 0: Galileo GT-64111 System Controller, rev 1
tlp0 at pci0 dev 7 function 0: DECchip 21143 Ethernet, pass 4.1
tlp0: interrupting at level 1
tlp0: Ethernet address 00:10:e0:00:ab:25
lxtphy0 at tlp0 phy 1: LXT970 10/100 media interface, rev. 3
lxtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib0 at pci0 dev 9 function 0
pcib0: VIA Technologies VT82C586 PCI-ISA Bridge, rev 39
viaide0 at pci0 dev 9 function 1
viaide0: VIA Technologies VT82C586 (Apollo VP) ATA33 controller
viaide0: bus-master DMA support present
viaide0: primary channel configured to compatibility mode
viaide0: primary channel interrupting at irq 14
atabus0 at viaide0 channel 0
viaide0: secondary channel configured to compatibility mode
viaide0: secondary channel interrupting at irq 15
atabus1 at viaide0 channel 1
VIA Technologies VT83C572 USB Controller (USB serial bus, revision
0x02) at pci0 dev 9 function 2 not configured
tlp1 at pci0 dev 12 function 0: DECchip 21143 Ethernet, pass 4.1
tlp1: interrupting at level 2
tlp1: Ethernet address 00:10:e0:00:ab:18
lxtphy1 at tlp1 phy 1: LXT970 10/100 media interface, rev. 3
lxtphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
Kernelized RAIDframe activated
wd0 at atabus0 drive 0: <SAMSUNG SV1533D>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 14598 MB, 29660 cyl, 16 head, 63 sec, 512 bytes/sect x 29897280 sector=
s
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
wd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
Tue Nov 15 05:31:09 MST 2005
swapctl: adding /dev/wd0b as swap device at priority 0
Checking for botched superblock upgrades: done.
Starting file system checks:
/dev/rwd0a: file system is clean; not checking
Setting tty flags.
Setting sysctl variables:
ddb.fromconsole: 1 -> 0
Starting network.
Hostname: taz.andy.com
Configuring network interfaces: tlp0.
add net default: gateway 192.168.1.254
Adding interface aliases:
Building databases...
Starting syslogd.
Checking for core dump...
savecore: no core dump
Mounting all filesystems...
Clearing /tmp.
Checking quotas: done.
Setting securelevel: kern.securelevel: 0 -> 1
Starting virecover.
Starting local daemons:Turning off disk write cache.
Updating motd.
Starting ntpd.
Starting sshd.
Starting inetd.
Starting cron.
Tue Nov 15 05:31:22 MST 2005