On Jun 22, 2005, at 9:11 AM, Andreas Schaefer wrote:

> Please have a look at
>
>
> ftp.uni-erlangen.de/pub/unix/BSD/NetBSD-COBALT/RestoreCD- 
> image-20-20050621-234816.iso.gz
>
> or
>
> http://ftp.uni-erlangen.de/pub/unix/BSD/NetBSD-COBALT/RestoreCD- 
> image-20-20050621-234816.iso.gz
>
> They kindly mirrored the file from my raq2 (faster and no traffic  
> limit).

Hi all;

I have successfully installed 2.0 from this netboot .iso; thanks bery  
much for the effort and time it tok to build it.

Everything is nice, PAM finally works, but I have a huge lag when  
coming in the ssh.  Serial console responds promptly.

I don't notice anything out of place in the dmesg, and top has load  
of 0.11 or less.  there is a strage "pause" csh though, which I don't  
recall being there this often before.
cvs updates etc proceed nice and fast, I don't think it's a  
connection thing.  And it occurs whether I'm connecting to the Qube  
from a wired host, or via wireless.

Anything that I can look at for system stats that would help figure  
out what is going on?

Please find my dmesg and top outputs below.

Qube 2, 128 RAM, new 60gig HD, 2.0.

thanks for thoughts;

Brian

-------
# dmesg
4
atabus0 at viaide0 channel 0
viaide0: secondary channel configured to compatibility mode
viaide0: secondary channel interrupting at irq 15
atabus1 at viaide0 channel 1
VIA Technologies VT83C572 USB Controller (USB serial bus, revision  
0x02) at pci0 dev 9 function 2 not configured
ahc0 at pci0 dev 10 function 0: Adaptec 2940 Ultra SCSI adapter
ahc0: interrupting at irq 9
ahc0: aic7880: Ultra Single Channel A, SCSI Id=7, 16/253 SCBs
scsibus0 at ahc0: 8 targets, 8 luns per target
tlp1 at pci0 dev 12 function 0: DECchip 21143 Ethernet, pass 4.1
tlp1: interrupting at level 2
tlp1: Ethernet address 00:10:e0:01:36:d1
lxtphy1 at tlp1 phy 1: LXT970 10/100 media interface, rev. 3
lxtphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
Kernelized RAIDframe activated
scsibus0: waiting 2 seconds for devices to settle...
wd0 at atabus0 drive 0: <Maxtor 6Y060L0>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 58644 MB, 119150 cyl, 16 head, 63 sec, 512 bytes/sect x  
120103200 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33)  
(using DMA)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
syncing disks... done
unmounting file systems...Copyright (c) 1996, 1997, 1998, 1999, 2000,  
2001, 2002, 2003, 2004, 2005
     The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
     The Regents of the University of California.  All rights reserved.

NetBSD 3.99.3 (GENERIC) #1: Sat May 14 13:25:21 CEST 2005
         root@netbsd20.s-zone.org:/Data/NetBSD/cobalt/obj/sys/arch/ 
cobalt/compile/GENERIC
total memory = 128 MB
avail memory = 121 MB
mainbus0 (root)
com0 at mainbus0 addr 0x1c800000 level 3: st16650a, working fifo
com0: console
cpu0 at mainbus0: QED RM5200 CPU (0x28a0) Rev. 10.0 with built-in FPU  
Rev. 10.0
cpu0: 32KB/32B 2-way set-associative L1 Instruction cache, 48 TLB  
entries
cpu0: 32KB/32B 2-way set-associative write-back L1 Data cache
panel0 at mainbus0 addr 0x1f000000
gt0 at mainbus0 addr 0x14000000
pci0 at gt0
pci0: i/o space, memory space enabled, rd/line, wr/inv ok
pchb0 at pci0 dev 0 function 0: Galileo GT-64111 System Controller,  
rev 1
tlp0 at pci0 dev 7 function 0: DECchip 21143 Ethernet, pass 4.1
tlp0: interrupting at level 1
tlp0: Ethernet address 00:10:e0:01:36:ca
lxtphy0 at tlp0 phy 1: LXT970 10/100 media interface, rev. 3
lxtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib0 at pci0 dev 9 function 0
pcib0: VIA Technologies VT82C586 PCI-ISA Bridge, rev 39
viaide0 at pci0 dev 9 function 1
viaide0: VIA Technologies VT82C586 (Apollo VP) ATA33 controller
viaide0: bus-master DMA support present
viaide0: primary channel configured to compatibility mode
viaide0: primary channel interrupting at irq 14
atabus0 at viaide0 channel 0
viaide0: secondary channel configured to compatibility mode
viaide0: secondary channel interrupting at irq 15
atabus1 at viaide0 channel 1
VIA Technologies VT83C572 USB Controller (USB serial bus, revision  
0x02) at pci0 dev 9 function 2 not configured
ahc0 at pci0 dev 10 function 0: Adaptec 2940 Ultra SCSI adapter
ahc0: interrupting at irq 9
ahc0: aic7880: Ultra Single Channel A, SCSI Id=7, 16/253 SCBs
scsibus0 at ahc0: 8 targets, 8 luns per target
tlp1 at pci0 dev 12 function 0: DECchip 21143 Ethernet, pass 4.1
tlp1: interrupting at level 2
tlp1: Ethernet address 00:10:e0:01:36:d1
lxtphy1 at tlp1 phy 1: LXT970 10/100 media interface, rev. 3
lxtphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
Kernelized RAIDframe activated
scsibus0: waiting 2 seconds for devices to settle...
wd0 at atabus0 drive 0: <Maxtor 6Y060L0>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 58644 MB, 119150 cyl, 16 head, 63 sec, 512 bytes/sect x  
120103200 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33)  
(using DMA)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
#


load averages:  0.08,  0.08,   
0.08                                                                
01:38:26
20 processes:  19 sleeping, 1 on processor
CPU states:     % user,     % nice,     % system,     %  
interrupt,     % idle
Memory: 12M Act, 204K Wired, 4992K Exec, 4984K File, 104M Free
Swap: 256M Total, 256M Free

   PID USERNAME PRI NICE   SIZE   RES STATE      TIME   WCPU    CPU  
COMMAND
   527 root       2    0   416K 2088K select     0:02  0.00%  0.00% sshd
     7 root      18    0     0K 1900K syncer     0:01  0.00%  0.00%  
[ioflush]
   661 root      29    0   164K  980K CPU        0:00  0.00%  0.00% top
   628 brian     18    0   320K 1084K pause      0:00  0.00%  0.00% csh
   626 root      18    0   304K 1072K pause      0:00  0.00%  0.00% csh
     2 root      14    0     0K 1900K crypto_w   0:00  0.00%  0.00%  
[cryptoret]
    41 brian     10   -2   188K 1860K wait       0:00  0.00%  0.00% su
   567 root      10    0   260K  928K nanoslee   0:00  0.00%  0.00% cron
     1 root      10    0    80K  892K wait       0:00  0.00%  0.00% init
   605 root       3    0    60K  880K ttyin      0:00  0.00%  0.00%  
getty
   607 root       2    0   532K 3284K netio      0:00  0.00%  0.00% sshd
   622 brian      2    0   532K 2580K select     0:00  0.00%  0.00% sshd
   593 root       2    0   128K 1040K kqread     0:00  0.00%  0.00%  
inetd
   237 root       2    0   184K  940K kqread     0:00  0.00%  0.00%  
syslogd
     5 root      -6    0     0K 1900K sccomp     0:00  0.00%  0.00%  
[scsibus0]
     4 root      -6    0     0K 1900K atath      0:00  0.00%  0.00%  
[atabus1]
     3 root      -6    0     0K 1900K atath      0:00  0.00%  0.00%  
[atabus0]
     6 root     -18    0     0K 1900K pgdaemon   0:00  0.00%  0.00%  
[pagedaemon]
     8 root     -18    0     0K 1900K aiodoned   0:00  0.00%  0.00%  
[aiodoned]
     0 root     -18    0     0K 1900K schedule   0:00  0.00%  0.00%  
[swapper]