Hello

Im having some troubles with routing between the two ethernet ports. 
I don't think this is a cobalt issue but this is the best list i know 
of for help with problems.

The ports are configured as follows
ifconfig.tlp0
inet 192.168.181.1 netmask 255.255.255.0

ifconfig.tlp1
inet 10.1.1.4 netmask 255.0.0.0

Route show all displays
destination	gateway	flags
default		10.1.1.1	UG
10.0.0.0		link#2	U
router		mac	UH
loopback		127.0.0.1	UGR
localhost		127.0.0.1	UH
local.com		link#1	U
server		mac	UH
pc1		mac	UH

note mac is listed but i have left them out as there numbers are not 
of importance.

Now i can see all on both networks from the qube. if i send a request 
for something outside the local networks it finds it from the qube. 
now the problem is i cannot see anything on the 10. network or 
outside (the 10. network has a router to the internet that i must now 
go through)  from inside the 192 network. eg pc1 tries to get web 
page from sun.com and it cannot be found. qube gets the page fine 
thou.  now there must be a route command that i have managed to miss 
somewhere along the way but after spending the day googling and 
reseting the routing tables up i am still without a fix to the 
problem.

any help to correct this problem is most appreciated.
Thanks for your time

Aaron
-- 
True knowledge lies in knowing how to live.
        --Baltasar Graci=E1n