--Qrgsu6vtpU/OV/zm
Content-Type: text/plain; charset=iso-8859-1
Content-Disposition: inline
Content-Transfer-Encoding: quoted-printable

Hi all,

I found a little time today and thought I'd try again (after 6 months of du=
st
collecting here) to boot the 2 raq2 boxes I have laying here.  They seem to=
=20
be a little stubborn, to say the least.  The second box won't boot the=20
netbsd.gz or the netbsd.GENERIC.gz without puking, here's a short trace:

Cobalt Microserver Diagnostics - 'We serve it, you surf it'
Built Tue May 25 15:58:41 PDT 1999

 1.LCD Test................................PASS
 2.Controller Test.........................PASS
 5.Bank 0:.................................64M
 6.Bank 1:.................................64M
 7.Bank 2:.................................64M
 8.Bank 3:.................................64M
 9.Serial Test.............................PASS
10.PCI Expansion Slot....................**EMPTY**
12.IDE Test................................PASS
13.Ethernet Test...........................PASS
16.RTC Test................................PASS

Cobalt: bfd /netbsd.gz root=3D/dev/nfs nfsroot=3D/pub/cobalt
Decompressing done
Executing bootloader kernel...
Decompressing -- done.
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

trap: bus error (load or store) in kernel mode
status=3D0x20000006, cause=3D0x80841c, epc=3D0xa0000128, vaddr=3D0x804f81fa
pid=3D0 cmd=3D usp=3D0x0 ksp=3D0x801a9dd0
Stopped in  at  0xa0000128:     lw      k0,0(k1)
db> help
break           delete          next            search          trace
c               dwatch          p               set             until
call            examine         print           show            w
callout         kill            ps              sifting         watch
continue        machine         reboot          step            write
d               match           s               sync            x
db> trace
PC 0xa0000128: not in kernel space
0+a0000128 (803c9300,801a7708,801a72d0,801a7700) ra 0 sz 0
User-level: pid 0
db> show registers
at          0x801a0000
v0                   0
v1                   0
a0          0x803c9300
a1          0x801a7708
a2          0x801a72d0
a3          0x801a7700
t0          0x801a7704
t1          0x801a7718
t2          0x801a72d8
t3          0x801a7704
t4          0x806cd280
t5          0x801a9df2
t6          0x801a9e12
t7              0x8ca0
s0          0x803c9300
s1             0x64300
s2                   0
s3           0x236e000
s4                   0
s5          0x801a7714
s6                   0
s7                 0x1
t8                   0
t9              0x8ca0
k0                   0
k1                   0
gp          0x80189b50
sp          0x801a9e48
fp          0x801a770c
ra          0x80119998
sr          0x20000006
mdlo            0xf931
mdhi             0xd48
bad                  0
cs                   0
pc          0xa0000128
0xa0000128:     lw      k0,0(k1)


The first box still hangs in its usual place:

Built Tue May 25 15:58:41 PDT 1999

 1.LCD Test................................PASS
 2.Controller Test.........................PASS
 5.Bank 0:.................................64M
 6.Bank 1:.................................64M
 7.Bank 2:.................................64M
 8.Bank 3:.................................64M
 9.Serial Test.............................PASS
10.PCI Expansion Slot....................**EMPTY**
12.IDE Test................................PASS
13.Ethernet Test...........................PASS
16.RTC Test................................PASS

Cobalt: bfd /netbsd.gz root=3D/dev/nfs nfsroot=3D/pub/cobalt
Decompressing done
Executing bootloader kernel...
Decompressing -- done.
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.5.2 (GENERIC) #4: Mon Nov 25 10:51:34 CET 1963
    root@raq:/usr/1-5-release/src/sys/arch/cobalt/compile/GENERIC
256 MB memory, 234 MB free, 13208 KB in 3302 buffers
mainbus0 (root)
com0 at mainbus0 addr 0x1c800000 level 3: st16650a, working fifo
com0: console
cpu0 at mainbus0: QED RM5200 CPU (0x28a0) Rev. 10.0 with built-in FPU Rev.
10.0
cpu0: L1 cache: 32KB/32B instruction, 32KB/32B data, two way set associative
cpu0: No L2 cache
gt0 at mainbus0 addr 0x14000000
pci0 at gt0
pci0: i/o space, memory space enabled, rd/line, wr/inv ok
pchb0 at pci0 dev 0 function 0: Galileo GT-64111 System Controller, rev 1
tlp0 at pci0 dev 7 function 0: DECchip 21143 Ethernet, pass 4.1
tlp0: sorry, unable to handle your board
Symbios Logic 53c860 (SCSI mass storage, revision 0x02) at pci0 dev 8
Symbios Logic 53c860 (SCSI mass storage, revision 0x02) at pci0 dev 8
function d
pcib0 at pci0 dev 9 function 0
pcib0: VIA Technologies VT82C586 (Apollo VP) PCI-ISA Bridge, rev 37
pciide0 at pci0 dev 9 function 1: VIA Technologies VT82C586 (Apollo VP)
ATA33 cr
pciide0: bus-master DMA support present
pciide0: primary channel configured to compatibility mode
wd0 at pciide0 channel 0 drive 0: <QUANTUM FIREBALL CR4.3A>
wd0: drive supports 16-sector pio transfers, lba addressing
wd0: 4110 MB, 14848 cyl, 9 head, 63 sec, 512 bytes/sect x 8418816 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data
transfers)
pciide0: secondary channel configured to compatibility mode
pciide0: disabling secondary channel (no drives)
VIA Technologies VT83C572 USB Controller (USB serial bus, revision 0x02) at
pcid
tlp1 at pci0 dev 12 function 0: DECchip 21143 Ethernet, pass 4.1
tlp1: sorry, unable to handle your board
boot device: <unknown>
root device:/dev/nfs
use one of: tlp0 wd0[a-p] tlp1 halt
root device: tlp0
dump device: /dev/null
use one of: wd0[a-p] none halt
dump device: none
file system (default generic):
root on tlp0
nfs_boot: 'tlp0' not found
no file system for tlp0
cannot mount root, error =3D 79
root device (default tlp0): tlp1
dump device: none
file system (default generic):
root on tlp1
nfs_boot: 'tlp1' not found
no file system for tlp1
cannot mount root, error =3D 79
root device (default tlp1):

The linux boot sees the nic's on both raq's like this:

eth0: Digital DS21143 Tulip rev 65 at 0x10100000, 00:10:E0:00:60:0C, IRQ 4.
eth0: Old format EEPROM on 'Cobalt 27' board.  Using substitute media
control i.
eth0:  EEPROM default media type Autosense.
eth0:  Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block.
eth0:  MII transceiver #1 config 1000 status 7809 advertising 01e1.
eth1: Digital DS21143 Tulip rev 65 at 0x10101000, 00:10:E0:00:60:11, IRQ 13.
eth1: Old format EEPROM on 'Cobalt 27' board.  Using substitute media
control i.
eth1:  EEPROM default media type Autosense.
eth1:  Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block.
eth1:  MII transceiver #1 config 1000 status 7809 advertising 01e1.

I'm going to try -current according to Hubert's suggestion, but my time is =
a=20
little limited to work on these boxes.  Thanks in advance for any input you=
=20
might have.
--=20

Med vennlig hilsen / Best Regards                              =20

Shaun Jurrens (System Administrator)                =20
Tiscali-World Online Norge=20
Postboks 598, Sk=F8yen=20
N-0214 Oslo - Norway                   =20
Tel. (+47) 24 11 24 00 - Fax (+47) 24 11 24 49=20

--Qrgsu6vtpU/OV/zm
Content-Type: application/pgp-signature
Content-Disposition: inline

-----BEGIN PGP SIGNATURE-----
Version: PGP Personal Edition 5.0
MessageID: MI/Rj+6td9J6VAJIyOtr3bpvz3+bocaH

iQCVAwUBPCxveGJ1nUQA3asdAQFc3QQAtvJ6uPgX6L1OBLVk8oJ2ZcnPG6d39Txm
cWMe5KEwCiCFhHypQL5xUgWXRTxrxYFWRH4bWNbbnXeeSlmM+BZWOiNq1kWveXwL
zMBorriPeo7iX7hHuWA8QfGBg6JxwaXaRmDx1cMErWhBmDYaj/S5YR7dhgKKvVkG
FT3Lv79Xhs4=
=sRqk
-----END PGP SIGNATURE-----

--Qrgsu6vtpU/OV/zm--