Subject: Re: other prodcuts dmesg and proc/pci (the rest of them)
To: None <port-cobalt@netbsd.org>
From: Stephen Harrell <sharrell@cobalt.com>
List: port-cobalt
Date: 03/23/2000 17:54:25
here are the remaining products, and these are all our released mips
products, hope this helps you out.
-stephen
Cache Qube
dmesg:
Loading R4000 MMU routines.
CPU revision is: 00002810
Primary ICACHE 16K (linesize 32 bytes)
Primary DCACHE 16K (linesize 32 bytes)
Probing PCI hardware.
Calibrating delay loop.. ok - 149.50 BogoMIPS
Memory: 63644k/65532k available (768k kernel code, 1120k data)
Swansea University Computer Society NET3.035 for Linux 2.0
NET3: Unix domain sockets 0.13 for Linux NET3.035.
Swansea University Computer Society TCP/IP for NET3.034
IP Protocols: ICMP, UDP, TCP
Appletalk 0.17 for Linux NET3.035
VFS: Diskquotas version dquot_5.6.0 initialized
Checking for 'wait' instruction... available.
Linux version 2.0.33 (root@ninka.cobaltmicro.com) (gcc version 2.7.2) #1
Fri Apr 3 04:21:29 PST 1998
Starting kswapd v 1.5
Real Time Clock Driver v1.07
Cobalt LCD Driver v2.00
loop: registered device at major 7
ide: Cobalt MicroServer IDE controller.
ide0: BM-DMA at 0x1000cc00-0x1000cc07
hda: ST34520A, 4341MB w/448kB Cache, CHS=9408/15/63
ide0 at 0x100001f0-0x100001f7,0x100003f6 on irq 14
tulip.c:v0.76 4/22/97 becker@cesdis.gsfc.nasa.gov
eth0: DEC 21041 Tulip at 0x10100000, 21041 mode, 00 10 e0 00 13 8c, IRQ 13
eth0: Old style EEPROM -- no media selection information.
eth1: DEC 21140 Tulip at 0x10108000, 00 40 05 a1 b9 3b, IRQ 12
eth1: EEPROM default media type Autosense.
Partition check:
hda: hda1 hda2 hda3 hda4
VFS: Mounted root (ext2 filesystem) readonly.
Adding Swap: 102528k swap-space (priority -1)
/proc/pci :
PCI devices found:
Bus 0, device 10, function 0:
Ethernet controller: DEC DC21140 (rev 34).
Medium devsel. Fast back-to-back capable. Master
Capable. Latency=64. Min Gnt=20.Max Lat=40.
I/O at 0x10108000.
Bus 0, device 9, function 2:
USB Controller: VIA Technologies Unknown device (rev 2).
Vendor id=1106. Device id=3038.
Medium devsel. Master Capable. Latency=22.
I/O at 0x300.
Bus 0, device 9, function 1:
IDE interface: VIA Technologies VT 82C586 Apollo VP-1 (rev 6).
Medium devsel. Fast back-to-back capable. IRQ 14. Master
Capable. Latency=248.
I/O at 0xcc00.
Bus 0, device 9, function 0:
ISA bridge: VIA Technologies VT 82C586 Apollo VP-1 (rev 39).
Medium devsel. Master Capable. No bursts.
Bus 0, device 7, function 0:
Ethernet controller: DEC DC21041 (rev 33).
Medium devsel. Fast back-to-back capable. IRQ 13. Master
Capable. Latency=64.
I/O at 0x10100000.
Non-prefetchable 32 bit memory at 0x3000.
Bus 0, device 0, function 0:
Host bridge: Unknown vendor Unknown device (rev 1).
Vendor id=11ab. Device id=4146.
Medium devsel. Fast back-to-back capable. Master
Capable. Latency=7.
Non-prefetchable 32 bit memory at 0x2000000.
Prefetchable 32 bit memory at 0x1c000000.
Prefetchable 32 bit memory at 0x1f000000.
Non-prefetchable 32 bit memory at 0x14000000.
I/O at 0x14000000.
RaQ2 (noplus)
dmesg:
Loading R4000 MMU routines.
CPU revision is: 000028a0
Primary ICACHE 32K (linesize 32 bytes)
Primary DCACHE 32K (linesize 32 bytes)
ns16550: console I/O
Probing PCI hardware.
Calibrating delay loop.. ok - 249.86 BogoMIPS
Memory: 14904k/16380k available (1008k kernel code, 468k data)
Swansea University Computer Society NET3.035 for Linux 2.0
NET3: Unix domain sockets 0.13 for Linux NET3.035.
Swansea University Computer Society TCP/IP for NET3.034
IP Protocols: IGMP, ICMP, UDP, TCP
Appletalk 0.17 for Linux NET3.035
VFS: Diskquotas version dquot_5.6.0 initialized
Checking for 'wait' instruction... available.
Linux version 2.0.34 (root@cj.cobaltnet.com) (gcc version 2.7.2) #1 Thu
Feb 25 21:04:19 PST 1999
Starting kswapd v 1.5
Serial driver version 4.13 with no serial options enabled
tty00 at 0x1c800000 (irq = 7) is a 16550A
Real Time Clock Driver v1.09
Cobalt LCD Driver v2.10
loop: registered device at major 7
ide: Cobalt MicroServer IDE controller.
GAL CFG[00000001-->00000003]
ide0: BM-DMA at 0x1000cc00-0x1000cc07
hda: QUANTUM FIREBALL CR4.3A, 4110MB w/418kB Cache, CHS=14848/9/63, UDMA
ide0 at 0x100001f0-0x100001f7,0x100003f6 on irq 14
scsi : 0 hosts.
scsi : detected total.
PPP: version 2.3.5 (demand dialling)
TCP compression code copyright 1989 Regents of the University of
California
PPP line discipline registered.
SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256).
CSLIP: code copyright 1989 Regents of the University of California.
SLIP linefill/keepalive option.
tulip.c:v0.76 4/22/97 becker@cesdis.gsfc.nasa.gov
eth0: DEC 21142 Tulip at 0x10100000, 00 10 e0 00 47 c3, IRQ 4
eth0: Old format EEPROM on 'Cobalt 27' board. Using substitute media
control info.
eth0: EEPROM default media type MII 10baseT.
eth0: Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block.
Partition check:
hda: hda1 hda2 hda3 hda4
VFS: Mounted root (ext2 filesystem) readonly.
Adding Swap: 130748k swap-space (priority -1)
sysctl: ip forwarding off
/proc/pci:
PCI devices found:
Bus 0, device 9, function 2:
USB Controller: VIA Technologies VT 82C586 Apollo USB (rev 2).
Medium devsel. Master Capable. Latency=22.
I/O at 0x300.
Bus 0, device 9, function 1:
IDE interface: VIA Technologies VT 82C586 Apollo IDE (rev 6).
Medium devsel. Fast back-to-back capable. IRQ 14. Master
Capable. Latency=64.
I/O at 0xcc00.
Bus 0, device 9, function 0:
ISA bridge: VIA Technologies VT 82C586 Apollo ISA (rev 39).
Medium devsel. Master Capable. No bursts.
Bus 0, device 7, function 0:
Ethernet controller: DEC DC21142 (rev 65).
Medium devsel. Fast back-to-back capable. IRQ 4. Master
Capable. Latency=128. Min Gnt=20.Max Lat=40.
I/O at 0x10100000.
Non-prefetchable 32 bit memory at 0xa3c09800.
Bus 0, device 0, function 0:
Memory: Unknown vendor Unknown device (rev 17).
Vendor id=11ab. Device id=4146.
Medium devsel. Fast back-to-back capable. Master
Capable. Latency=64.
Non-prefetchable 32 bit memory at 0x1000000.
Non-prefetchable 32 bit memory at 0x1c000000.
Non-prefetchable 32 bit memory at 0x1f000000.
Non-prefetchable 32 bit memory at 0x14000000.
I/O at 0x14000000.
Cache RaQ 2
dmesg:
Loading R4000 MMU routines.
CPU revision is: 000028a0
Primary ICACHE 32K (linesize 32 bytes)
Primary DCACHE 32K (linesize 32 bytes)
ns16550: console I/O
Probing PCI hardware.
Calibrating delay loop.. ok - 249.86 BogoMIPS
Memory: 257148k/262140k available (1144k kernel code, 3848k data)
Swansea University Computer Society NET3.035 for Linux 2.0
NET3: Unix domain sockets 0.13 for Linux NET3.035.
Swansea University Computer Society TCP/IP for NET3.034
IP Protocols: IGMP, ICMP, UDP, TCP
Linux IP multicast router 0.07.
Appletalk 0.17 for Linux NET3.035
VFS: Diskquotas version dquot_5.6.0 initialized
Checking for 'wait' instruction... available.
Linux version 2.0.34 (root@cj.cobaltnet.com) (gcc version 2.7.2) #1 Thu
Mar 25 20:13:02 PST 1999
Starting kswapd v 1.5
Serial driver version 4.13 with no serial options enabled
tty00 at 0x1c800000 (irq = 7) is a 16550A
Real Time Clock Driver v1.09
Cobalt LCD Driver v2.10
loop: registered device at major 7
ide: Cobalt Networks IDE controller.
GAL CFG[00000003-->00000003]
ide0: BM-DMA at 0x1000cc00-0x1000cc07
ide1: BM-DMA at 0x1000cc08-0x1000cc0f
hda: QUANTUM FIREBALL CX13.0A, 12416MB w/418kB Cache, CHS=25228/16/63,
UDMA
ide0 at 0x100001f0-0x100001f7,0x100003f6 on irq 14
md driver 0.36.3 MAX_MD_DEV=4, MAX_REAL=8
linear personality registered
raid0 personality registered
raid1 personality registered
raid5 personality registered
scsi : 0 hosts.
scsi : detected total.
PPP: version 2.3.5 (demand dialling)
TCP compression code copyright 1989 Regents of the University of
California
PPP line discipline registered.
SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256).
CSLIP: code copyright 1989 Regents of the University of California.
SLIP linefill/keepalive option.
tulip.c:v0.76 4/22/97 becker@cesdis.gsfc.nasa.gov
eth0: DEC 21142 Tulip at 0x10100000, 00 10 e0 00 7f cd, IRQ 4
eth0: Old format EEPROM on 'Cobalt 27' board. Using substitute media
control info.
eth0: EEPROM default media type MII 10baseT.
eth0: Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block.
eth1: DEC 21142 Tulip at 0x10101000, 00 10 e0 00 7f b8, IRQ 13
eth1: Old format EEPROM on 'Cobalt 27' board. Using substitute media
control info.
eth1: EEPROM default media type MII 10baseT.
eth1: Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block.
Partition check:
hda: hda1 hda2 hda3 hda4
VFS: Mounted root (ext2 filesystem) readonly.
Adding Swap: 102812k swap-space (priority -1)
rs_close: bad serial port count; tty->count is 1, info->count is 0
/proc/pci:
PCI devices found:
Bus 0, device 12, function 0:
Ethernet controller: DEC DC21142 (rev 65).
Medium devsel. Fast back-to-back capable. IRQ 13. Master
Capable. Latency=64. Min Gnt=20.Max Lat=40.
I/O at 0x10101000.
Non-prefetchable 32 bit memory at 0xfe7bfc00.
Bus 0, device 9, function 2:
USB Controller: VIA Technologies VT 82C586 Apollo USB (rev 2).
Medium devsel. Master Capable. Latency=22.
I/O at 0x300.
Bus 0, device 9, function 1:
IDE interface: VIA Technologies VT 82C586 Apollo IDE (rev 6).
Medium devsel. Fast back-to-back capable. IRQ 14. Master
Capable. Latency=64.
I/O at 0xcc00.
Bus 0, device 9, function 0:
ISA bridge: VIA Technologies VT 82C586 Apollo ISA (rev 39).
Medium devsel. Master Capable. No bursts.
Bus 0, device 7, function 0:
Ethernet controller: DEC DC21142 (rev 65).
Medium devsel. Fast back-to-back capable. IRQ 4. Master
Capable. Latency=64. Min Gnt=20.Max Lat=40.
I/O at 0x10100000.
Non-prefetchable 32 bit memory at 0xfff8dc00.
Bus 0, device 0, function 0:
Memory: Unknown vendor Unknown device (rev 17).
Vendor id=11ab. Device id=4146.
Medium devsel. Fast back-to-back capable. Master
Capable. Latency=64.
Non-prefetchable 32 bit memory at 0x8000000.
Non-prefetchable 32 bit memory at 0x1c000000.
Non-prefetchable 32 bit memory at 0x1f000000.
Non-prefetchable 32 bit memory at 0x14000000.
I/O at 0x14000000.