Ok, I'm ready to install NetBSD on my CacheRAQ!

Is there a specific firmware version required, or anything like
that?  Do I netboot a kernel, or use the existing Linux partition to
load it, etc? 

FWIW, I'll append the dmesg output.

Thanks!

-Andrew
-- 
-----------------------------------------------------------------
Andrew Gillham                            | This space left blank
gillham@whirlpool.com                     | inadvertently.
I speak for myself, not for my employer.  | Contact the publisher.


Loading R4000 MMU routines.
CPU revision is: 000028a0
Primary ICACHE 32K (linesize 32 bytes)
Primary DCACHE 32K (linesize 32 bytes)
ns16550: console I/O
Probing PCI hardware.
Calibrating delay loop.. ok - 249.86 BogoMIPS
Memory: 257148k/262140k available (1144k kernel code, 3848k data)
Swansea University Computer Society NET3.035 for Linux 2.0
NET3: Unix domain sockets 0.13 for Linux NET3.035.
Swansea University Computer Society TCP/IP for NET3.034
IP Protocols: IGMP, ICMP, UDP, TCP
Linux IP multicast router 0.07.
Appletalk 0.17 for Linux NET3.035
VFS: Diskquotas version dquot_5.6.0 initialized
Checking for 'wait' instruction...  available.
Linux version 2.0.34 (root@cj.cobaltnet.com) (gcc version 2.7.2) #1 Thu Mar 25 20:13:02 PST 1999
Starting kswapd v 1.5 
Serial driver version 4.13 with no serial options enabled
tty00 at 0x1c800000 (irq = 7) is a 16550A
Real Time Clock Driver v1.09
Cobalt LCD Driver v2.10
loop: registered device at major 7
ide: Cobalt Networks IDE controller.
GAL CFG[00000001-->00000003]
    ide0: BM-DMA at 0x1000cc00-0x1000cc07
    ide1: BM-DMA at 0x1000cc08-0x1000cc0f
hda: QUANTUM FIREBALL EX12.7A, 12159MB w/418kB Cache, CHS=24704/16/63, UDMA
ide0 at 0x100001f0-0x100001f7,0x100003f6 on irq 14
md driver 0.36.3 MAX_MD_DEV=4, MAX_REAL=8
linear personality registered
raid0 personality registered
raid1 personality registered
raid5 personality registered
scsi : 0 hosts.
scsi : detected total.
PPP: version 2.3.5 (demand dialling)
TCP compression code copyright 1989 Regents of the University of California
PPP line discipline registered.
SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256).
CSLIP: code copyright 1989 Regents of the University of California.
SLIP linefill/keepalive option.
tulip.c:v0.76 4/22/97 becker@cesdis.gsfc.nasa.gov
eth0: DEC 21142 Tulip at 0x10100000, 00 10 e0 00 2f 14, IRQ 4

eth0: Old format EEPROM on 'Cobalt 27' board.  Using substitute media control info.
eth0: EEPROM default media type MII 10baseT.
eth0: Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block.
eth1: DEC 21142 Tulip at 0x10101000, 00 10 e0 00 2f 1c, IRQ 13

eth1: Old format EEPROM on 'Cobalt 27' board.  Using substitute media control info.
eth1: EEPROM default media type MII 10baseT.
eth1: Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block.
Partition check:
 hda: hda1 hda2 hda3 hda4
VFS: Mounted root (ext2 filesystem) readonly.
Adding Swap: 102812k swap-space (priority -1)
rs_close: bad serial port count; tty->count is 1, info->count is 0
eth0: Using user-specified media MII.